I'm a "professional homeowner", and I do a decent amount of clearing in the woods around my house. I've taken a few safety courses in tree cutting, but this is the *first time* I have seen a clear and comprehensive diagram of what causes a barber chair and the physics behind why it happens. It's made me realize that I'm pretty lucky I haven't had this happen to me before. Thank you so much for taking the time to put this information together and share it with others.
As a retired tree Superviser, i can say this is a very well explained tutorial. Their are way too many inexperienced tree workers out there that have no idea what a Barberchair senario is! Great job!
ya.. many have never seen one... and I'll bet there's been more than a few deaths from BC where the person hadno idea what just happened to the tree...
Yes, i was almost one of them! Fortunately for me, the 20" Ash decides to fail on the opposite side of where i was cutting it. Me and my whole crew were speechless when it happened. I would have been driven into the ground like a nail. Never had any idea it could happen back then. Their was little education about it at that time.
I’ve seen a lot of videos on tree falling. They would talk about getting rid of the Dutchman, but never once explained what the hell it is. Now I know. Over the last 20 years, I’ve probably cut down close to 100 cords of firewood. 90% of it red oak. I now know that I have fallen trees with a Dutchman in the notch…many times. Never had a barber chair because of luck or tree species, but it does explain the behavior of the falling tree at times. Like the video, I’ve had a few start to fall then stop just like your video and never realized there was a barber chair danger. Wow. I always thought that risk was confined to leaners. Now I will be more attentive and make sure there is no Dutchman and remove it if there is. Thank you so much.
This is the first time I've seen a demonstration, or heard an explanation of the consequences of cutting a Dutchman. I've heard a lot about not doing it and now that has been explained. Very informative and useful. Thanks.
A few days ago I was taught by a friends father how to fell trees. He never mention "dutchman cut", but did make sure that I didnt over cut one side when making the wedge. I wasnt quite sure why, but always checked that I didnt overcut and if so I corrected. Now I know what have a potential of happening if you dont! Thx, very good video!
I took the 30-video tree-felling course on UA-cam published by a Canadian tree-felling company, and they showed something similar to this regarding avoiding a Barber-Chair mishap. You did a great job with your drawings and video demonstration!
Dang, glad that guy didn't get hit. Very comprehensive video regarding the dangers of A Barber Chair and breaking it down so as to understand the root cause and not make this mistake. Great Job.
Спасибо тебе, добрый человек! Это лучший первый урок по валке деревьев, который я видел! На втором уроке нужно рассказать о том, как закрывается передний разрез, и дерево может повернуться при падении. Этих основ достаточно для понимания.
Very well explained. I see 2 errors there: the first one, causing the barber chair. The second, running away with the chainsaw instead of dropping it instantly.
I never understood the importance of this issue concerning a Dutchman. But watching professional fallers here on YT and videos like yours which really explains the issue has really opened my eyes. Watching a pro clean up even small dutchmen has driven it home, and with great explanations like yours, it has made a significant difference in how I approach trees.
Good video on a very important subject. Working with trees is all about precision and understanding the forces acting on the tree. You have explained this very well. Thank you.
Thank you a very clear and concise video and only a few minutes beautiful. Becoming a more confident faller . Five years ago, I was nervous and Nelly and I almost took the gutter off the house . Thanks again.
Im a farmer primarily but do logging in winter. Ive fallen more trees then your average trees remover but less then your average logger. I had this happen once on a more recent timber track. I really like thus explanation and diagram. Having a better understanding now this video might save my life on the next stick I cut
good.. glas to hear it... amd no one except a logger has dropped as many trees as your average logger.. It looks like we're doing the same kind of work, but it's a much different game..
Awesome explanation. I have a cottonwood leaning over my driveway. What I learned from this video is to just hire someone competent, I don't wanna die any time soon.
I really found this upload very informative and helpful as I wondered what causes the barber chair scenario. Very well explained and easy to understand. Cheers.
When a swinging Dutchman or some other cut is required on a tree that is prone to barber chairing and you really need to avoid the split in the wood (causing you’re using it for lumber) use heavy ratchet straps on the log above your cut. The tension keeps the fibers together. I’ve never had a barber chair happen after I’ve strapped the tree.
ya, a strap is 100% effective as long as it's strong enough to keep th tree from splitting... if the trunk can't split, the tree cannot barber chair... Good cuttign technique will prevent most trees from BC< but a heavy front leaner with structural issues, the strap is the only way to be sure. I try to wrap it around two or three times, as many as possible for extra strength.
you can also bore in cut the center leave side tabs of holding wood and cut back out as long as you dont have enough wood in the center to hold it from falling it wont barber chair but its kind of a learn as you go art , yes unintentional dutchman poor practice I had better luck chopping out a chunk of the wedge and reinserting it if I wanted to use dutchman to swing around now I guess they just jack .
There are many more things like that in this biz.. so few people really don't understand the "Why".. they just do it or even teacd it because that's the way it's always been done... I always look for the why.. once you understand the why, the door opens to a world of new possibilities
@@murphy4trees weird you saying that, you sounded like me last week explaining how train brakes work to a new starter. Understanding is a mile apart from just doing. I’ve been felling trees for over 30 years and always made a neat face cut not understanding how important it actually is. Again, thank you
Wow. I was 1/2 way through your video, and I wasn't catching on. Then it hit me! That's phenomenal. If you had not replayed it three times, I would have had to do it myself 3x! I've never fully understood the barber chair causes, and I've never fully understood why, some cutters "brush out" the sawdust, after the first wedge cut.... Now, finally, all this makes sense. All this in less than 4 minutes. Thank you so much! /A New Subscriber.
I have gotten away with inadvertently leaving a dutchman because I didnt understand what it was and worse yet, the potential hazard. Thank you for the clear explanation.
As clearly explained and illustrated description of this dangerous thing as I've seen. I've seen some of your other videos involving barber chair, which are excellent. This one however, emphasizes what causes it and how to avoid it, while the previous ones, for me at least, highlighted the dangers.
I very very rarely get involved in tree cutting and when I do it’s typically helping a friend. That said, I find these this video very interesting. It doesn’t hurt to learn something just in case. I think this video does very good of explaining - narration, graphics, video/stills - what is going on. 👍🏻
Thanks! I've been doing a fair amount of falling since becoming a landowner, and somehow kind of instinctively always tried to avoid cutting too far when chunking out my pie pieces, but didn't think it would be a big deal if I did accidentally go too far. Seeing this, I'm gonna be even MORE careful!
A species that’s prone to barber chair may do so even IF perfect cutting techniques are employed especially if it has considerable lean / canopy weighted to one side, bore cuts are an option , however a robust strap / chain secured snugly about a foot above the back cut is the safest way to do the job imho. Even IF the holding fibers give way the strap/chain will “hold it all together”. I’ve split a shit ton of ash by hand and some of it is extremely easy to split , just “drop” the axe or maul on it and it splits in half … IF this is the case in the hinge (and forward leaning / heavy canopy ) it has a high probability of barber-chairing - even with PERFECT cutting technique let alone Dutchman bypass . It only takes a few minutes to secure the strap and potentially avoid an unpleasant situation
the diagram is designed to illustrate the information needed to educate the viewer about the dangers of barber chair. The width of the hinge has no bearing on this teaching... so what difference does it make.. and while I AM an advocate of fat hinges, there are many scenarios where a thin hinge is perfectly acceptable... 10% hige width is just a guideline. apparently there are too many variables to teach much beyond that guideline on an industry level.
it all mkas sense when someone finally explains it... One of the reasons I can recognize it when I see it is because I've done it.. back before I knew better.
Thank you very much, very well explained! Although I never experienced any barber chair with falling leaning white ash (ideal species for that!!!), I think I was just lucky so far, because I did not know yet about that bypass. From now, I am going to be very careful about that! Thanks again!
This video really helped me and was straight to the point. Cutting down some white oaks and red oaks on my property that the gypsy moths got to before they go completely south on me punking around the outside like they will do. I didnt have any major barber chair occurrences but some very minute ones ruining first 5' of the first log or having split cracks in the center of the heart wood. Thank you for this
I have BC a couple knowing that wouold make the splitting for firewood easier, but only when I could finish the cut and induce the BC from a pull line set to heavy truck or loader... not worth risking being anywhere a tree when it BCs
good question.... most trees aren't likely to BC, but if you set a high pull line and put enough pull on the line before the back cut is deep enough to make th ehinge the weak point in the system, most trees can BC. SPecies has a lot to do with it. Wood that is easy to split for firewood by hand is a lot easier to BC than tough stringy fiber trees that are hard to split
@murphy4trees interesting. I grew up with logging and loggers all around. I watched with respect from a safe distance and decided falling one isn't for me. They make it look easy but I know it isn't.
it can be until it isn't anymore and hopefully the faller walks away alive and a little wiser. My first advice to someone who wants to get into this biz is to find another way to make a living, unless you really love trees. There are a lot of other ways to make a living
of course it all depends... you can get away with cutting some corners in a given scenario, but you have to know the why, which includes all the things that can possibly go wrong.
Hi Daniel, Excellent explanation which allows us to understand the “why” of this phenomenon. but I have a question: at 2:45 on the video, you show two drawings. I understand perfectly that in the case of the drawing on the left, the fall of the tree to the right will cause it to tip slightly and find itself blocked with all its weight on the "point" which will cause it to burst vertically. But in the case of the drawing on the right, what will happen and why? Thank you in advance for your response.
both of those cuts are called unintentional Dutchman... which is a bypass in the face cuts. Either one will cause the fall to stall when the kerf closes. Functionally, I think there is little or no difference in their effect, which is inducing a higher chance of Barber chair
Good stuff. You can also see it moving just above his head, which clearly shows it was equal movement there as at the top indicating that wind was most likely not a factor. Have a great week.
ya.. you gotta wonder why with all the training organizations out there, the best explanation of many important concepts in tree falling and rigging is to be found from guys that are just out there making sawdust everyday on UA-cam!!!
Thanks.. god to hear.. it's amazing to me that the best instruction in chainsaw techniques come from UA-cam. The industry trade organizations are terrified of touching anything outside of the narrow little box of their 40 year old cutting techniques.
I've seen enough tree failures on the job to know that the tree will often asorb an initial impact, and then with some delay, often deconds, sometimes minutes the fibers will just give up. So the delay is the not unexpected in many scenarios. This is aperfect example.... even that little forward movement and then sudden stop as enough to rip that trunk in half, but it took few seconds.
It’s as simple as that. Perfectly explained, well done. Literally saving lives with a video like this good stuff. 👍
I'm a "professional homeowner", and I do a decent amount of clearing in the woods around my house. I've taken a few safety courses in tree cutting, but this is the *first time* I have seen a clear and comprehensive diagram of what causes a barber chair and the physics behind why it happens. It's made me realize that I'm pretty lucky I haven't had this happen to me before. Thank you so much for taking the time to put this information together and share it with others.
same for me.. I cut one and watched it and only found out years later why
what is a professional home owner?
An unintentional bypass on the gob is only one reason a barber chair may accour.
@@JohnnyIDive37I was gonna ask that lol
@@Toyotaamazon80series definetly... I AM going to write about it...
Wow, an actual explanation of what, why, and how to avoid. In only a few minutes, rather than 15 minutes blabbing. You are a national treasure!
I know what you'r talking about.. it gets tiring...
As a retired tree Superviser, i can say this is a very well explained tutorial. Their are way too many inexperienced tree workers out there that have no idea what a Barberchair senario is! Great job!
ya.. many have never seen one... and I'll bet there's been more than a few deaths from BC where the person hadno idea what just happened to the tree...
Yes, i was almost one of them! Fortunately for me, the 20" Ash decides to fail on the opposite side of where i was cutting it. Me and my whole crew were speechless when it happened. I would have been driven into the ground like a nail. Never had any idea it could happen back then. Their was little education about it at that time.
I’ve seen a lot of videos on tree falling. They would talk about getting rid of the Dutchman, but never once explained what the hell it is. Now I know. Over the last 20 years, I’ve probably cut down close to 100 cords of firewood. 90% of it red oak. I now know that I have fallen trees with a Dutchman in the notch…many times. Never had a barber chair because of luck or tree species, but it does explain the behavior of the falling tree at times. Like the video, I’ve had a few start to fall then stop just like your video and never realized there was a barber chair danger. Wow. I always thought that risk was confined to leaners. Now I will be more attentive and make sure there is no Dutchman and remove it if there is. Thank you so much.
Excellent video. Thank you.
You sir, just saved a number of lives with this precise info. Thanks for the clear description of a Dutchman and what it can cause. Bravo!
This is the first time I've seen a demonstration, or heard an explanation of the consequences of cutting a Dutchman. I've heard a lot about not doing it and now that has been explained. Very informative and useful. Thanks.
A few days ago I was taught by a friends father how to fell trees.
He never mention "dutchman cut", but did make sure that I didnt over cut one side when making the wedge.
I wasnt quite sure why, but always checked that I didnt overcut and if so I corrected.
Now I know what have a potential of happening if you dont!
Thx, very good video!
I took the 30-video tree-felling course on UA-cam published by a Canadian tree-felling company, and they showed something similar to this regarding avoiding a Barber-Chair mishap. You did a great job with your drawings and video demonstration!
Do they use much video from real tree jobs or is it all stages and mocked up?
Dang, glad that guy didn't get hit. Very comprehensive video regarding the dangers of A Barber Chair and breaking it down so as to understand the root cause and not make this mistake. Great Job.
Explained well, easy to understand, and it only takes a few minutes to clean up notch, to avoid any accidents, thanks for your time
I wish more videos were as brass tacks as this one. To the point critical knowledge to stay safe.
Thank you.
no lack of information on my end.. don't know why these guys have to ramble on endlessly..
This is the best
explanation I’ve ever seen about why a barber chair occurs and how to avoid it. Great job! Thanks!!!
my pleasure
Good job, people need to understand the danger in tree falling. Thanks for the knowledge, and love to see more.
Thanks, there's pleny out there.. just got to look around
Спасибо тебе, добрый человек! Это лучший первый урок по валке деревьев, который я видел!
На втором уроке нужно рассказать о том, как закрывается передний разрез, и дерево может повернуться при падении.
Этих основ достаточно для понимания.
Very well explained. I see 2 errors there: the first one, causing the barber chair. The second, running away with the chainsaw instead of dropping it instantly.
Yep. Watching that bar swinging around his legs as he ran had me clenching the first time I saw it.
I don't know about you, but I I'm insured. My saw is not. My deductible is only $25. My saw is not.
Very helpful with exellent demonstrations and pictures.
Excellent explanation of what causes a barber chair *and* why it's so important to have clean notches.
Best explanation of why a barber chair happens in simple terms. Great video example.
Glad you liked it!
Excellent explanation of the Dutchman! So clear and concise.
I never understood the importance of this issue concerning a Dutchman. But watching professional fallers here on YT and videos like yours which really explains the issue has really opened my eyes. Watching a pro clean up even small dutchmen has driven it home, and with great explanations like yours, it has made a significant difference in how I approach trees.
Nice. You only have to see them take a hard turn on the smallest of bypasses once
Good video on a very important subject. Working with trees is all about precision and understanding the forces acting on the tree. You have explained this very well. Thank you.
Thank you a very clear and concise video and only a few minutes beautiful. Becoming a more confident faller . Five years ago, I was nervous and Nelly and I almost took the gutter off the house . Thanks again.
YW
Im a farmer primarily but do logging in winter. Ive fallen more trees then your average trees remover but less then your average logger. I had this happen once on a more recent timber track. I really like thus explanation and diagram. Having a better understanding now this video might save my life on the next stick I cut
good.. glas to hear it... amd no one except a logger has dropped as many trees as your average logger.. It looks like we're doing the same kind of work, but it's a much different game..
This old tree feller thanks you for showing my ignorance. I never worried if the notch was not perfect but no more!
the best instructional I've ever seen on the topic
thank you... ;)
Awesome explanation. I have a cottonwood leaning over my driveway. What I learned from this video is to just hire someone competent, I don't wanna die any time soon.
Cottonwoods are extremely prone to barber chair. I had one go on me a few years ago and now wrap them with a ratchet strap for insurance.
David, I have come to a similar conclusion with all but the smallest of trees. Smart decision, live to fight another day.
Awesome illustration! Makes sense now! Thanks for sharing!
Glad you liked it!
I really found this upload very informative and helpful as I wondered what causes the barber chair scenario. Very well explained and easy to understand. Cheers.
Life saver. Especially with the sawdust remarks. Literally life saving info
When a swinging Dutchman or some other cut is required on a tree that is prone to barber chairing and you really need to avoid the split in the wood (causing you’re using it for lumber) use heavy ratchet straps on the log above your cut. The tension keeps the fibers together. I’ve never had a barber chair happen after I’ve strapped the tree.
ya, a strap is 100% effective as long as it's strong enough to keep th tree from splitting... if the trunk can't split, the tree cannot barber chair... Good cuttign technique will prevent most trees from BC< but a heavy front leaner with structural issues, the strap is the only way to be sure. I try to wrap it around two or three times, as many as possible for extra strength.
you can also bore in cut the center leave side tabs of holding wood and cut back out as long as you dont have enough wood in the center to hold it from falling it wont barber chair but its kind of a learn as you go art , yes unintentional dutchman poor practice I had better luck chopping out a chunk of the wedge and reinserting it if I wanted to use dutchman to swing around now I guess they just jack .
Best explanation I've ever seen. Great job, hats off to you.
Glad it was helpful!
Fantastic explanation, understood the physics coming into play and it seems so obvious afterwards, thank you.
There are many more things like that in this biz.. so few people really don't understand the "Why".. they just do it or even teacd it because that's the way it's always been done... I always look for the why.. once you understand the why, the door opens to a world of new possibilities
@@murphy4trees weird you saying that, you sounded like me last week explaining how train brakes work to a new starter. Understanding is a mile apart from just doing. I’ve been felling trees for over 30 years and always made a neat face cut not understanding how important it actually is. Again, thank you
Really good info here Daniel! Very good film work and diagrams. This kind of education will really help newbies advance quicker. Great job!
short and beautiful explanation, CRYSTAL CLEAR . Thank you sir.
glad to know it works for you.
Wow. I was 1/2 way through your video, and I wasn't catching on. Then it hit me! That's phenomenal. If you had not replayed it three times, I would have had to do it myself 3x! I've never fully understood the barber chair causes, and I've never fully understood why, some cutters "brush out" the sawdust, after the first wedge cut.... Now, finally, all this makes sense. All this in less than 4 minutes. Thank you so much! /A New Subscriber.
Gopod to hear and welcome... there's a lot of good info here if you look around a while...
FINALLY! A video that seems to cover this well enough. Thank you Mr. Murphy!
happt to help bro!
Excellent video! Thanks for posting!
I have gotten away with inadvertently leaving a dutchman because I didnt understand what it was and worse yet, the potential hazard. Thank you for the clear explanation.
Awesome explanation. Really really well done sir. Comprehensive, short, interesting. Good job.
As clearly explained and illustrated description of this dangerous thing as I've seen. I've seen some of your other videos involving barber chair, which are excellent. This one however, emphasizes what causes it and how to avoid it, while the previous ones, for me at least, highlighted the dangers.
I agree with the other commentary below ,
The most well explained and visual example of its subject on the net from a pro thank you
my pleasure
Thank you for recording and posting this valuable educational video.
Glad it was helpful!
Im so glad you showed the diagram with how to correct this.
I very very rarely get involved in tree cutting and when I do it’s typically helping a friend. That said, I find these this video very interesting. It doesn’t hurt to learn something just in case. I think this video does very good of explaining - narration, graphics, video/stills - what is going on. 👍🏻
Thanks! I've been doing a fair amount of falling since becoming a landowner, and somehow kind of instinctively always tried to avoid cutting too far when chunking out my pie pieces, but didn't think it would be a big deal if I did accidentally go too far. Seeing this, I'm gonna be even MORE careful!
A species that’s prone to barber chair may do so even IF perfect cutting techniques are employed especially if it has considerable lean / canopy weighted to one side, bore cuts are an option , however a robust strap / chain secured snugly about a foot above the back cut is the safest way to do the job imho. Even IF the holding fibers give way the strap/chain will “hold it all together”. I’ve split a shit ton of ash by hand and some of it is extremely easy to split , just “drop” the axe or maul on it and it splits in half … IF this is the case in the hinge (and forward leaning / heavy canopy ) it has a high probability of barber-chairing - even with PERFECT cutting technique let alone Dutchman bypass . It only takes a few minutes to secure the strap and potentially avoid an unpleasant situation
Can you link an example of the wrapping of the chain?
@@samiam159007 ua-cam.com/video/p04sxvuZu7E/v-deo.html
@@murphy4trees Awesome, that was great, Thanks Daniel!
Exceptional video:. Topic. Explanation. Example. Conclusion. Thank you. Good bye.
We'll done.
C
Highly informative, great lesson. Thank you, another thing to keep at the front of thought when I'm making firewood.
Glad it was helpful!
Great film! I'm new to chainsaws and tree felling so I didn't know about the barber chair and mistakes to avoid when felling.
Very informative, good to know how the vertical split is caused.
Brilliantly explained. Thank you Daniel.
someone has to do it ;)
I’ve recently seen people put heavy duty ratchet straps or chains around the trunk to prevent this as well.
Best explanation I've seen to date!
Great. Thankyou. (Your diagrams appear to show almost no hinge wood... surely not intentional?)
the diagram is designed to illustrate the information needed to educate the viewer about the dangers of barber chair. The width of the hinge has no bearing on this teaching... so what difference does it make.. and while I AM an advocate of fat hinges, there are many scenarios where a thin hinge is perfectly acceptable... 10% hige width is just a guideline. apparently there are too many variables to teach much beyond that guideline on an industry level.
I understand now. Very well explained. Thank you
Perfect explanation. Finally clear to me. Thanks
it all mkas sense when someone finally explains it... One of the reasons I can recognize it when I see it is because I've done it.. back before I knew better.
Cool review/tutorial, thank you!
Glad it was helpful!
Thank you for that nice clear explanation. You guys are schooling me big time!
Happy to help!
good illustrations to clarify narration. Most cutters in PNW that have stayed with it have close call stories with Red Alder.
right... would ahve been better to keep cutting if you were expecting the thing to split, but a bad face cut was still the culprit.
Hi Daniel, thanks for the quick and extremely good explanation. Awesome video.
Thanks
Scotty
Great explanation, I'm gonna pay more attention to this and chack out more of your videos.
great example/demo, now I finally understand barber chair
Thank you very much, very well explained! Although I never experienced any barber chair with falling leaning white ash (ideal species for that!!!), I think I was just lucky so far, because I did not know yet about that bypass. From now, I am going to be very careful about that! Thanks again!
awesome simple explanation of physics in falling. be safe out there
This video really helped me and was straight to the point. Cutting down some white oaks and red oaks on my property that the gypsy moths got to before they go completely south on me punking around the outside like they will do. I didnt have any major barber chair occurrences but some very minute ones ruining first 5' of the first log or having split cracks in the center of the heart wood. Thank you for this
I have BC a couple knowing that wouold make the splitting for firewood easier, but only when I could finish the cut and induce the BC from a pull line set to heavy truck or loader... not worth risking being anywhere a tree when it BCs
Great video nicely done.
Glad you enjoyed it
Lifesaving information. Thank you.
I learned something today, thank you.
Nice video, quick and to the point
Exactly! Also I've seen a tree go almost 90° off the lay because of the bypass. He missed about an inch fiber on the side it fell.
Me too, though it was about 45 degrees and just a little bypass in the far corner filled with sawdust so I didn't notice it
Best explanation I have seen
me too.... and thanks!
Wow! Thank you! Now I get it! I had one split last year, now I can see why.
I've been felling trees on my land, intermittently, foe over 20 years, and I'm pleased that I have never made THAT mistake!
Excellent, succinct and superbly illustrated.
Go to the front of the line!
DOUGout
Great info here! Thank You
My pleasure!
Great explanation! I believe this is most common with cutting conifers.( soft wood)
Can any tree become a barber chair or must there be a pre-existing glaw that causes it?
good question.... most trees aren't likely to BC, but if you set a high pull line and put enough pull on the line before the back cut is deep enough to make th ehinge the weak point in the system, most trees can BC. SPecies has a lot to do with it. Wood that is easy to split for firewood by hand is a lot easier to BC than tough stringy fiber trees that are hard to split
@murphy4trees interesting. I grew up with logging and loggers all around. I watched with respect from a safe distance and decided falling one isn't for me. They make it look easy but I know it isn't.
it can be until it isn't anymore and hopefully the faller walks away alive and a little wiser. My first advice to someone who wants to get into this biz is to find another way to make a living, unless you really love trees. There are a lot of other ways to make a living
@murphy4trees I played little league against Murphy Company Logging.
Great explanation, its three cuts, each one needs to be done correctly, not close enough.
of course it all depends... you can get away with cutting some corners in a given scenario, but you have to know the why, which includes all the things that can possibly go wrong.
Excellent video. This type of info saves lives....
Great explanation and video. It also looks like his facecut is pretty shallow which added to the vertical stress.
Thanks Sir . One more bit of knowledge in my bag. Appreciate it.
Great video! Short and to the point.
Glad it was helpful!
Excellent explanation! Thank you!
Glad it was helpful!
Hi Daniel,
Excellent explanation which allows us to understand the “why” of this phenomenon. but I have a question: at 2:45 on the video, you show two drawings. I understand perfectly that in the case of the drawing on the left, the fall of the tree to the right will cause it to tip slightly and find itself blocked with all its weight on the "point" which will cause it to burst vertically. But in the case of the drawing on the right, what will happen and why? Thank you in advance for your response.
both of those cuts are called unintentional Dutchman... which is a bypass in the face cuts. Either one will cause the fall to stall when the kerf closes. Functionally, I think there is little or no difference in their effect, which is inducing a higher chance of Barber chair
@@murphy4trees Thanks a lot!
Good stuff.
You can also see it moving just above his head, which clearly shows it was equal movement there as at the top indicating that wind was most likely not a factor.
Have a great week.
Tks for this, very clear and easy to understand.
Glad it was helpful!
Well explained!
Great video, this helps A LOT of people!
Hi handsome. Great illustration and vocabulary. More videos . ❤
Great explanation ! Thank-you .
ya.. you gotta wonder why with all the training organizations out there, the best explanation of many important concepts in tree falling and rigging is to be found from guys that are just out there making sawdust everyday on UA-cam!!!
Very educational video … THANK YOU
Really good explenation!
Very well done, I heat with firewood and cut down many trees. I am not a logger so I really appreciate any info to make it safer for me. Thanks
Gotta love all these logging videos where they try to make it look like rocket science.
Clear explanation, thank you
Glad it was helpful!
This was surprisingly easy to understand for the layperson
Thanks.. god to hear.. it's amazing to me that the best instruction in chainsaw techniques come from UA-cam. The industry trade organizations are terrified of touching anything outside of the narrow little box of their 40 year old cutting techniques.
Very strong video 💪🏻 helped me rookie a lot. Thanks a lot
Very very nice video. Thanks a lot Daniel.
Great explanation. I notice it stopped moving, it is the unexplained pause in momentum.
I've seen enough tree failures on the job to know that the tree will often asorb an initial impact, and then with some delay, often deconds, sometimes minutes the fibers will just give up. So the delay is the not unexpected in many scenarios. This is aperfect example.... even that little forward movement and then sudden stop as enough to rip that trunk in half, but it took few seconds.