It's very simple when you have 2 screws go through the wood into the 'table' surface. Under the wood drill a hole in the surface, some leads to the screws, and hang a battery under the surface.
Works and is build on a transparent acrylic surface. Its called "V-Gate Magnet Propulsion Motor" and not "Free Energy Bullshit". ua-cam.com/video/IzD9ObbijIY/v-deo.html
You realize that there is no such thing as "Free Energy", Right... All of these videos are rigged up so they seem like they are actually working... perpetual motion machines violate newtons laws... Just saying :D Go watch some electroboom
@@martinpanev6651 Of course. But they work SO HARD at the illusion of perpetual motion and free energy. I just find it all oddly fascinating. Thanks, Mark
“Energy cannot be created or destroyed; it can only be changed from one form to another.” (Albert Einstein). Creative Think-We have UA-cam we can make free energy.
I copied this machine and it was incredible, it still working more since 6 weeks. My dishwasher, cooker, tv, all my lights for free, at night my Tesla is charged. Wunderful thank you so much. I am a bookseller and have no technician knowledge and now it works!!!
Wow!! In 7:37 we can look crossing an other person's shadow over the table. Yes, The same person who activates the air compressor that blows the screws of the device so that it does not stop rotating and it seems that it is not another project that violates the laws of thermodynamics.
Não funciona ! Se fosse verdade teria mos carros autônomos postes sem fiação teríamos geradores em casa para gerar nosso próprio consumo ! Trabalhei 23 anos em sala de provas de geradores e motores da TOSHIBA DO BRASIL e sei tudo sobre o assunto!
this kind of video are there to confirm the fake news "free energy is impossible". The free enegy exists. The proove are in Mendeleev tab. Find me ONE element where his electrons dont use the free energy to turn at vitam eternam around his nucleus. 👍 You can agress the atom and then electrons move temporary but at end they return at their initial position and rotation. Magic ? Nop it's some rules of nature wich "science" dont care.
I was greatly impressed by him drilling a hole in the side of a stainless screw using a loosely chucked drill bit, while holding the screw in his fingers, producing no metal chips at all, and stopping after penetrating only 2 mm into the plywood support.
I'm going to need a really powerful unit, because it's going to be associated with the time machine that I'm finishing these days. The set is a voracious consumer of energy. You understand me, sure.
Gotta love how YT cracks down on fake news and info( ie, anyone showing facts)... but let’s things like this, Alt Med and the like just go. It’s almost like they are in it just for the money and anything else is just posing and pandering
Looks like power source is connected to the screw from below, which is connected as the brush. You gave it away the moment you connected a bulb and it was switched on instantly while there is no reduction on the motor speed.
@@OswaldBeef I'm not saying it's real, but there was clearly a dip in speed [like you said.] It was audible, and you could visually tell the frequency changed for the spinning object.
At 4:23 is where and how they are inputting external power into the system. Between 7:35 and 7:45 someone is turning on the external power to the device from underneath.
Unfortunately, this cannot work, already because of the small losses due to the resistance of the cables and mechanical losses. If you then connect a consumer, such as this lamp, the whole thing comes to a defensive standstill. My guess is that the screws that go through the wood were connected to a hidden voltage source. BUT: The engine should work like this.
I remember way way back in junior high school my science teacher rigging something like this up when one of us students asked if it were possible. He did it to demonstrate that no it is not possible & doesn’t work. There is too much loss in energy thru heat & friction & thru belt attachment so that immediately after manual force was withdrawn it would stop. Nice illusion tough. Like others pointed out I believe hidden battery was attached thru screws
I think people should stop saying "there is too much loss to friction and heat and stuff". Yes, that is true, however, if there was no loss of energy to anything, that's just a flywheel battery; it is still not free energy even if there is no energy loss. Not saying it's wrong, it just makes it sound like free energy is possible with no friction.
How u know this guys name is homie! I mean i just got to know let me in on some of that action please homie u are reading this i hope so homie later homie
Many do not believe in perpetual motion. Well, let's take an elementary example. We take 2 microscopic plates, bring them close to each other (piezoelectric). We extract energy from quantum fluctuations (Casimir effect, Pressure due to constantly appearing and disappearing virtual particles). Let's convert energy into electricity. We scale the system into a matrix. Such energy can be extracted continuously until the contacts deteriorate. I like the moment when Quantum Physics breaks Classical.
Yeah the guy should’ve shown how he secures the motor. I guess he could’ve used some of his CA glue to glue it down. But he should’ve shown it just because people will question this. I actually think this could work tho. But I’m no expert. I’d need to build one to be sure
Amazing!! This is basically a machine that creates energy with only two magnets. You should submit a paper. Guarantee you get a Nobel. You should call it a “perpetual motion machine”, it is a catchy name that you can patent and that no one has ever proposed. Also, call Greta, tell her the energy problem is finally solved, she can go back to class.
@@alexmousley7213 my god! We have now found all the hidden items and power ups. Easy street from here on out! Thank you Flying Spaghetti Monster Fairy Elf Leprechaun Demigod!
But karol you dont see the small cables under the table from another power source. Otherwise we are here in Saudi will never have Indian rice and the American bananas anymore. In the same time we cant eat the oil here
This trick is well-known. Another trick is using air moving device to support rotation. In my videos I use super capacitors’ wrapped by bobbin to camouflage energy source.
The speed reduced when a load is connected to it,fine but, after neglected that, the speed increased to it's peak, this is an evidence of an external power source. So this is a fabricated video, but keep going and find a way to turn it into reality. Good luck...
Тут всё просто: параллельно скрытно включается ещё один источник питания с таким же напряжением к тем двум винтам. Т.к. у обоих источников одинаковое напряжение, то изменение оборотов движка никак при этом не изменится.
всё верно, весь секрет в тех двух саморезах к которым припаяны провода с двух сторон. С одной видим, с другой скрываем подключенный источник питания. Секрет Полишинеля. Но для многих вау-эффект.
1 Question: The rotation of rotor in DC motor will create an Sine wave. Means AC current. How come you are driving a LED light which works on DC?...LOL RIP laws of energy and physics
@@christianpowerssavesthewor8404 Well actually I can’t complain. I have never had a job that wasn’t a hobby first. So I just carried on with my hobbies while people gave me money and more toys to play with. So I am happy with an optimum solution. Knowledge and logic is key.
Well, what about if you lived in a hamburger that is so large that we still don't know how big it is... Bad analogy but with the universe being a big electromagnetic generator one could possible attain free energy
it works,I did 20 of these, a little bigger and put in my Tesla. Right now I am travelling from the south of the US right to Canada and didn't have to charge. 5000Km and still going! It also power my electric shower when I stop to sleep.
Never hold metallic or sharp edged work pieces by hand if you drill them! Fingers don´t grow again. The ground plate could be larger to give the motor a flexible mounting point. ;) Next challenge: unit´s noise protection. :D
Ah yes, brilliant minds over the centuries have failed to build a perpetual motion machine but finally a DIYer on UA-cam has managed to break the laws of physics and electricity. I suppose cold fusion is next.
Só um pequeno detalhe me chamou atenção, esse motor funciona com energia contínua e oque esse gerador está gerando é energia alternada, como é possível ??
When the current in the dc motor is used to turn on the lights. The resulting torque is reduced or it may not be possible to turn the dynamo motor again.
Вот это да!! В 7:37 мы можем смотреть, как тень другого человека пересекает стол. Да, тот самый человек, который приводит в действие воздушный компрессор, который продувает винты устройства, чтобы оно не переставало вращаться, и кажется, что это не очередной проект, нарушающий законы термодинамики.
The Second Law of Thermodynamics deals with the transfer of thermal energy. This means that it indicates heat exchanges that tend to equal different temperatures (thermal balance), which happens spontaneously. Its principles are: Heat is spontaneously transferred from the highest temperature to the lowest temperature body. Every process has a loss because its yield is always less than 100%. This law was established from the studies of Sadi Carnot (1796-1832). Encouraged by the Industrial Revolution, the French physicist was studying the possibility of increasing the efficiency of machines. Analyzing thermal machines, Carnot found that they were most efficient when heat was transferred from the highest temperature to the lowest temperature. This always happens in that order, after all, the transfer of thermal energy is an irreversible process. This means that work depends on the transfer of thermal energy, remembering that it is not possible to transform all heat into work. It was based on Carnot's ideas that Clausius and Kelvin based their studies on thermodynamics. The Second Law of Thermodynamics is related to the concept of entropy. It completes the First Law of Thermodynamics, which is based on the principle of energy conservation.
this kind of video are there to confirm the fake news "free energy is impossible". The free enegy exists. The proove are in Mendeleev tab. Find me ONE element where his electrons dont use the free energy to turn at vitam eternam around his nucleus. 👍 You can agress the atom and then electrons move temporary but at end they return at their initial position and rotation. Magic ? Nop it's some rules of nature wich "science" dont care.
I keep thinking about the threads of the rotor stud cutting into the wire's insulation over time. How hard would it have been to wrap a turn or two of tape over the threads? Oh, I guess that would have put the project over budget.
he make a home made rotor and install hiden battery to original rotor for use a battery. after connect org rotor(battery) to home made rotor, this working😁😁😁
This is great. Why has no one done this before. This guy with cheap tools will bankrupt the energy companies. I’m going to make one 10 x bigger and get myself free energy for life !
Its amazing - it produces an excess of electricity, even with those bearings and the shafts being unbalanced! Naturally it produces more power than it uses...😬
WOW. While watching this video, some metal parts moved towards my monitor and all the light bulbs in the house started to glow. Out the window I can see my neighbor (with a pacemaker) suddenly walking twice as fast. Free energy is great! However, now also some of my brain cells have left my head in a hurry...
When they attach the load (light) you can see it slows down so he quickly pulls the wire away. Under a load it will rapidly slow down and stop vs. without the load it will eventually slow down and stop.
Cyrano de Bergerac's fourth method of getting to the Moon: "...seated on an iron plate, I toss a magnet into the air. The iron rises; I catch the magnet; toss it again; and so proceed indefinitely." That will work about as well as this.
WoW !!! perpetual energy from a couple of strong neodymium....this is definitely an invention to solve Mankind's clean energy needs for Centuries..An Invention deserving a NOBLE PRIZE !.
Most difficult part of designing a free energy generator is hiding batteries
Indeed....:)
It's very simple when you have 2 screws go through the wood into the 'table' surface. Under the wood drill a hole in the surface, some leads to the screws, and hang a battery under the surface.
@@erichop822 You do have to wonder what the point of those two screws are. No reason for them to be there otherwise.
@@jancatalinnicoara485 غعغعدغغغغععع
@@erichop822 I wondered if some one caught this. Good onya.
как хорошо тем кто не знает физику))) каждый день волшебство вокруг)))
Согласен!!! Хуйня это все!
Это не волшебство, это надувательство. Но 6 миллионов идиотов посмотрели. (В числе этих лохов и я).
как только в кадре появляются коричневые руки этого индуса, то значит будет очередная порция вранья и обмана 🤣🤣🤣
There’s a reason theses things are NEVER done on transparent acrylic 😊
Works and is build on a transparent acrylic surface. Its called "V-Gate Magnet Propulsion Motor" and not "Free Energy Bullshit".
ua-cam.com/video/IzD9ObbijIY/v-deo.html
What?
I am always SO entertained by all of these clever perpetual motion and free energy illusions on UA-cam.
Thank You,
Mark
You realize that there is no such thing as "Free Energy", Right... All of these videos are rigged up so they seem like they are actually working... perpetual motion machines violate newtons laws... Just saying :D Go watch some electroboom
@@martinpanev6651 Of course. But they work SO HARD at the illusion of perpetual motion and free energy. I just find it all oddly fascinating.
Thanks,
Mark
Büyük bir yalan sadece vaktinizi boşa harcamayın derim
This fake man
so you make them money, you give them relevance over real educational videos so youtube algorithm pushes it more
“Energy cannot be created or destroyed; it can only be changed from one form to another.” (Albert Einstein).
Creative Think-We have UA-cam we can make free energy.
Well, it speed will go down slowly slowly. But here it does not happen
@@ajeetkumar-ky5ek you should get a noble prize. Please mention my name in your speech.
اكو غأ مودع بلاس كوي عوموع اوفو
@@senjatajawa5875 bales gae boso rusia wae, cak!
And, What do you think about E=mc²?😏
This WONDERFUL FREE ENERGY is nothing that an AWG 44 wire connected to batteries under the table can't solve.
I copied this machine and it was incredible, it still working more since 6 weeks. My dishwasher, cooker, tv, all my lights for free, at night my Tesla is charged. Wunderful thank you so much. I am a bookseller and have no technician knowledge and now it works!!!
😂😂😂😂
😄😄
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
I have two left hands. Would you please charge my Tesla? It's parked vis a vis. Thanks.
🧢🧢🧢🧢🧢🧢
Wow!! In 7:37 we can look crossing an other person's shadow over the table. Yes, The same person who activates the air compressor that blows the screws of the device so that it does not stop rotating and it seems that it is not another project that violates the laws of thermodynamics.
Não funciona ! Se fosse verdade teria mos carros autônomos postes sem fiação teríamos geradores em casa para gerar nosso próprio consumo !
Trabalhei 23 anos em sala de provas de geradores e motores da TOSHIBA DO BRASIL e sei tudo sobre o assunto!
this kind of video are there to confirm the fake news "free energy is impossible".
The free enegy exists. The proove are in Mendeleev tab. Find me ONE element where his electrons dont use the free energy to turn at vitam eternam around his nucleus. 👍
You can agress the atom and then electrons move temporary but at end they return at their initial position and rotation.
Magic ? Nop it's some rules of nature wich "science" dont care.
@@joseferreirafilho2135 It's just the big oil companies keeping us down.
Danke!
I'm surprised this guy has still got all his fingers by the way he uses those power tools.
and perhap his eyes..lol.
Proudly sponsored by the 9-Digit Corporation.
I was greatly impressed by him drilling a hole in the side of a stainless screw using a loosely chucked drill bit, while holding the screw in his fingers, producing no metal chips at all, and stopping after penetrating only 2 mm into the plywood support.
His tool handling was like from a 6 years old kid - sorry to say...
Do you have the modification kit, to adapt it to my antigravity machine?
😂😂😂😂😂😂😂😂
🤣🤣🤣
best reaction ;-)
what do you mean ?
I'm going to need a really powerful unit, because it's going to be associated with the time machine that I'm finishing these days. The set is a voracious consumer of energy. You understand me, sure.
This reminds me of the time I connected two 9volt batteries in series and created 18volts total. Pretty amazing stuff
It was parallel
@@JoseHernandez-br8gq No its in series
I put two in parallel and got twice the current! What a discovery!
Did you stick it to your tongue to see if it had twice the tingle as 1 9v? Tell the truth now!
@@Bob_Adkins 😝😝😝
According to U-Tube, free energy is common as dirt :-D
Yeh, and the "inventor" always has brown hands.
Hard to believe ANYTHING anymore because of all the fake-trolls
Gotta love how YT cracks down on fake news and info( ie, anyone showing facts)... but let’s things like this, Alt Med and the like just go. It’s almost like they are in it just for the money and anything else is just posing and pandering
What do You mean with ”free energy”?
@@YDDES Entropy violation.
Looks like power source is connected to the screw from below, which is connected as the brush. You gave it away the moment you connected a bulb and it was switched on instantly while there is no reduction on the motor speed.
True
Exactly! No decrease in RPM’s......
Idk guys....I heard it decrease rpm instantly.. which makes sense. Doesn’t this video prove the machine generates zero power at all?
@@OswaldBeef I'm not saying it's real, but there was clearly a dip in speed [like you said.] It was audible, and you could visually tell the frequency changed for the spinning object.
I also notice that if this method is correct so why the led bulb glow fluently? Bulb must glow with flickering because the bulb is conected with motor
At 4:23 is where and how they are inputting external power into the system. Between 7:35 and 7:45 someone is turning on the external power to the device from underneath.
Right on! The armature and the magnets are just for the show (or try to fool people).
I built a much larger version of this and am now powering my truck with it. All for free. It is saving me lots of money. Thank you so much!
sure😂😂😂😂😂
Lier
It’s the truck that’s been sitting in your back covered with vines right.
next build will supply your home with free energy 😜
Unfortunately, this cannot work, already because of the small losses due to the resistance of the cables and mechanical losses. If you then connect a consumer, such as this lamp, the whole thing comes to a defensive standstill. My guess is that the screws that go through the wood were connected to a hidden voltage source.
BUT: The engine should work like this.
ىةىو
He lies like so many and Satan is proud of him for his lies.
Energy can never be created nor be destroyed. It just transferred from one form to another form
My teacher :
-2 for u. As u used 'Never' instead of 'neither'
Ñ6
T PO R
Dud
the engine assembly was interesting, but when it came to infinite energy, it was no fun anymore.
ua-cam.com/video/CjRH_ytr6VI/v-deo.html❤️❤️❤️❤️❤️❤️❤️🔥🔥🔥🔥🔥🔥🔥
Wow you're a genius " so instead of free, know you want infinite wow wow
@@ptypablobermudez3234 in this aspect it is the same thing
@@prajapat7728 fake
@@ptypablobermudez3234 It is fake, you are the "genius" here.
I remember way way back in junior high school my science teacher rigging something like this up when one of us students asked if it were possible. He did it to demonstrate that no it is not possible & doesn’t work. There is too much loss in energy thru heat & friction & thru belt attachment so that immediately after manual force was withdrawn it would stop.
Nice illusion tough. Like others pointed out I believe hidden battery was attached thru screws
I think people should stop saying "there is too much loss to friction and heat and stuff". Yes, that is true, however, if there was no loss of energy to anything, that's just a flywheel battery; it is still not free energy even if there is no energy loss. Not saying it's wrong, it just makes it sound like free energy is possible with no friction.
You are extremely lucky you still have all your fingers!!!!!......
he still has most of his fingers
parts have been burned off....
😄😄😄
@@kenwittlief255 by CT and tag
99
Thought so too, I found myself staring at those fingers every time something rotated
You’d think with all the money homie is saving with his free energy technology, he’d be able to afford a vice.
How u know this guys name is homie! I mean i just got to know let me in on some of that action please homie u are reading this i hope so homie later homie
Many do not believe in perpetual motion. Well, let's take an elementary example. We take 2 microscopic plates, bring them close to each other (piezoelectric). We extract energy from quantum fluctuations (Casimir effect, Pressure due to constantly appearing and disappearing virtual particles). Let's convert energy into electricity. We scale the system into a matrix. Such energy can be extracted continuously until the contacts deteriorate. I like the moment when Quantum Physics breaks Classical.
This is certainly not the "Zero Point Module" from Stargate: Atlantis, as different principles are used. But it reminds me of something.
Holding a bolt while drilling it can break you a finger. Using a grinder without the cover can break your face😂
It can break-a my-a finger, Luigi!
wakakakaka u right.. gecol iya
Could, might, can, BUT IT DIDN'T!
Yea true i the most stupid guy how he drill im in electrical , electronic filed for 30 yrs since 1985 but i see one of the stupidest guy
Driving a car can cost your life
I’m impressed................. he managed to do all that without chopping his fingers off 🤔
Why is he gunna cut fingers off?
nice job getting this to run without batteries. defying the laws of physics. good job drilling and glueing.
Your craftsmanship is second to none. Balanced like a Swiss watch.
This cannot happen as u can't produce energy but convert only
ua-cam.com/video/yIXPplShtg0/v-deo.html
Not only does it have perpetual motion but it also magnifies gravity, which, presumably, is why the motor stays put 🤣. Most impressive
AND ALL THIS WITHOUT LOSING A FINGER.
most impressive indeed.
Yeah the guy should’ve shown how he secures the motor. I guess he could’ve used some of his CA glue to glue it down. But he should’ve shown it just because people will question this. I actually think this could work tho. But I’m no expert.
I’d need to build one to be sure
Fake
Power source ( DC transormer or battery ) is hooked up to the terminal screw posts going through the motor board and table underneath!
Епонама! Наконец-то изобрели вечный двигатель! 👋👍
А то придумали какие законы физики 🙈 которые мешали до сих пор
The biggest mystery of this show: How could all fingers survive the construction?
There’s No such thing as free lunch. And, there’s No such thing as ”free energy”.
@@YDDES think of gravity
@@YDDES dum butt
@@YDDES yes you are correct as in this magnetic energy is used
Totally fake
Amazing!! This is basically a machine that creates energy with only two magnets. You should submit a paper. Guarantee you get a Nobel. You should call it a “perpetual motion machine”, it is a catchy name that you can patent and that no one has ever proposed. Also, call Greta, tell her the energy problem is finally solved, she can go back to class.
I love the way incompetent and ham-fisted people use tools, especially power tools but still manage to retain all their fingers (mostly) ...
Это из разряда "Чувствуешь пальчик а руки то вот они"))))
அருமையானது. அட்டகாசம்.நன்றி.
free energy found only in youtube 🤣🤣
Yes
You are right
Watch #scispell
@@Nitish-Rathod shit self advertising
What's that???
Don’t worry about it folks, free energy for the world thanks to this person! Bless you!!
Yes. I put a hundred in my house. Now I don’t pay for electricity.
Justin case you’re wondering.
Yes, mine was made by the local magic pixie using magic beans, which also are a form of free energy!
@@alexmousley7213 my god! We have now found all the hidden items and power ups. Easy street from here on out! Thank you Flying Spaghetti Monster Fairy Elf Leprechaun Demigod!
बंधु जो आप दिखा रहे हो वह हमारे दिमाग में जमाने से है आइडिया काफी बेहतरीन
Don’t discourage yourself of all this jealous guys. Continue to discover the golden grail. I like it.
But karol you dont see the small cables under the table from another power source. Otherwise we are here in Saudi will never have Indian rice and the American bananas anymore. In the same time we cant eat the oil here
This trick is well-known. Another trick is using air moving device to support rotation. In my videos I use super capacitors’ wrapped by bobbin to camouflage energy source.
@@klokipo sir you had make video when maked ,send me your link,Please.& Thanks!
Me: (reads video title)
Also me: ok let’s see how they fake it this time.
It is not a fake, it is inertia at work, the bolt and nut are quite massive to provide long enough time of running sufficient to take a short clip...
@@stefanbanev
Then why you do not publish it IEEE. Get patent as well . No need to setup nuclear power plant🤣🤣
@@stefanbanev No, the thing is spinning for 55 seconds, that's far too long. There is a hidden power source, guaranteed.
@@stefanbanev that’s a big negative
Thanks for hooking it up to that flickering light. Now I know how to power my seizures.
Its like condenzator, Eventualy loses power from battery (in this case kinetic) and stuck in the middle of polaritets
how efficient is the rate of loss in this device?
The speed reduced when a load is connected to it,fine but, after neglected that, the speed increased to it's peak, this is an evidence of an external power source. So this is a fabricated video, but keep going and find a way to turn it into reality. Good luck...
چند ساعت کار میکند کلا
Ł
Du impôt!
It does work. With +5 mil views UA-cam pays for his energy!
Why am I still here ? Oh yes...the comments 🤣👍
Brushless motor with brushes, very clever.
🤣😅🤣
😂🤣😂😅
Don't tell anyone, but a giant battery hides under the table.😱
WoW rEaLlY
🤣🤣🤣
The device scores 100% on the BS meter.
Junk oi
@Giussepe Ghvela kong don
From the union of parent number 1 and parent number two, Dumb-faced is always born
What is stopping the belt tension from moving the two items together ?
Super perpetual motion glue!
THAT is your quibble with a device that outputs more energy than is put in?
Come on guys, don't be too hard on'em
Reality stopping that
Magic
Free energy
*angry electroboom noises*
Put a load on it and see what happens to it.
Love your comment! I was about to make one :D Psm Love to electroboom
It's a Festivus miracle !!!
Тут всё просто: параллельно скрытно включается ещё один источник питания с таким же напряжением к тем двум винтам. Т.к. у обоих источников одинаковое напряжение, то изменение оборотов движка никак при этом не изменится.
его колбасит,но он не сдвигается ни на миллиметр.почему?да потому что в столе дыра и через неё пропущены провода и платформа приторочена к столу.
всё верно, весь секрет в тех двух саморезах к которым припаяны провода с двух сторон. С одной видим, с другой скрываем подключенный источник питания.
Секрет Полишинеля. Но для многих вау-эффект.
1 Question: The rotation of rotor in DC motor will create an Sine wave. Means AC current. How come you are driving a LED light which works on DC?...LOL RIP laws of energy and physics
A dc motor generates dc voltage. It is not a sine wave. But this still won’t work.
I love these comedy sites - there's nothing like going to sleep after a full on belly laugh !!!😅
Это можно еще явращать силой своей воли, надо только об этом подумать, и оно начинает крутиться.
“There ain’t no such thing as a free lunch!” Robert Heinlein
@@christianpowerssavesthewor8404 No strings attached?
@@christianpowerssavesthewor8404 Well actually I can’t complain. I have never had a job that wasn’t a hobby first. So I just carried on with my hobbies while people gave me money and more toys to play with. So I am happy with an optimum solution. Knowledge and logic is key.
@@christianpowerssavesthewor8404 I was contradicting your statement about wage slaves. To answer your other questions - yes and yes.
Well, what about if you lived in a hamburger that is so large that we still don't know how big it is... Bad analogy but with the universe being a big electromagnetic generator one could possible attain free energy
@@brettmoore3194 To generate energy you need an energy difference.
it works,I did 20 of these, a little bigger and put in my Tesla. Right now I am travelling from the south of the US right to Canada and didn't have to charge. 5000Km and still going! It also power my electric shower when I stop to sleep.
I am impressed how he held the bolt while drilling.
hahahahahahaha u funny. thanks for the giggle
Ya, I was cringing thinking, how does he still have all his fingers. LOL
He learn some day, with hard way.
Never hold metallic or sharp edged work pieces by hand if you drill them! Fingers don´t grow again.
The ground plate could be larger to give the motor a flexible mounting point. ;)
Next challenge: unit´s noise protection. :D
he kept it small and used mini batteries instead
Ah yes, brilliant minds over the centuries have failed to build a perpetual motion machine but finally a DIYer on UA-cam has managed to break the laws of physics and electricity. I suppose cold fusion is next.
Будем надеяться что в скором времени перейдёт на 220v. А там с его образованием, не долго короче подобная дичь будет выходить
Думаю одна фаза его не возьмет , но жду в прямом эфире включения автора между двух фаз с последующей прожаркой до хрустяжей корочки ! ;)
It's very helpful, let's do well together, see you guys again
Z
Bom
Im glad you showed us how to use power tools safely without us injuring ourselves, by the way the music sucks too.
The best part was no vice was needed ur awesome
Поздравляю, вы изобрели вечный двигатель, Ура....
нет. Он СНОВА изобрёл вечный двигатель))))
Какой раз уже?
Самое главное что он признался в описании видео, что это просто шутка и бесплатного электричества нет))
А так для диванных физиков пойдет.
Só um pequeno detalhe me chamou atenção, esse motor funciona com energia contínua e oque esse gerador está gerando é energia alternada, como é possível ??
Tem toda razão! Não se pode misturar corrente contínua com alternada !
Faike news !
@@joseferreirafilho2135 parabens por ter descoberto a mutreta, com certeza embaixo do motorzinho tem uma fiaçao o alimentando
Microseconds after I hear the soundtrack...I'm gone ...
🤣👍🏼
Owsome
What don't like about these perpetual motion nerds, is how they go on and on and on.
Haha
When the current in the dc motor is used to turn on the lights. The resulting torque is reduced or it may not be possible to turn the dynamo motor again.
the speed of machine is reduced and stop in finally when connected with load by energy conservation theory
Safety first. Always a good sign
by far the safest video ive seen
Вот он оказывается как выглядит вечный двигатель!
Вот это да!! В 7:37 мы можем смотреть, как тень другого человека пересекает стол. Да, тот самый человек, который приводит в действие воздушный компрессор, который продувает винты устройства, чтобы оно не переставало вращаться, и кажется, что это не очередной проект, нарушающий законы термодинамики.
@@Kostia_Abramov тупое предположение
nice loop (video loop)
This is a lie! goes against the 1st Law of Thermodynamics! Lift the device off the table!
good
Small comment, it is the 2nd law of Thermodynamics that this device defies. Entropy must increase, dS>0
The Second Law of Thermodynamics deals with the transfer of thermal energy. This means that it indicates heat exchanges that tend to equal different temperatures (thermal balance), which happens spontaneously.
Its principles are:
Heat is spontaneously transferred from the highest temperature to the lowest temperature body.
Every process has a loss because its yield is always less than 100%.
This law was established from the studies of Sadi Carnot (1796-1832). Encouraged by the Industrial Revolution, the French physicist was studying the possibility of increasing the efficiency of machines.
Analyzing thermal machines, Carnot found that they were most efficient when heat was transferred from the highest temperature to the lowest temperature. This always happens in that order, after all, the transfer of thermal energy is an irreversible process.
This means that work depends on the transfer of thermal energy, remembering that it is not possible to transform all heat into work.
It was based on Carnot's ideas that Clausius and Kelvin based their studies on thermodynamics.
The Second Law of Thermodynamics is related to the concept of entropy. It completes the First Law of Thermodynamics, which is based on the principle of energy conservation.
Не важно как, главное просмотры)))
Ілон Маск локті кусає
Maybe in a alternative universe with different laws of physics?
Energy can't be created
Unless it should have a natural source
this kind of video are there to confirm the fake news "free energy is impossible".
The free enegy exists. The proove are in Mendeleev tab. Find me ONE element where his electrons dont use the free energy to turn at vitam eternam around his nucleus. 👍
You can agress the atom and then electrons move temporary but at end they return at their initial position and rotation.
Magic ? Nop it's some rules of nature wich "science" dont care.
“There is as yet insufficient data for a meaningful answer...”
Entropy must increase, dS>0
The 2nd Law of thermodynamics.
It is worse than that it is enthalpy creation.
I keep thinking about the threads of the rotor stud cutting into the wire's insulation over time. How hard would it have been to wrap a turn or two of tape over the threads? Oh, I guess that would have put the project over budget.
У меня тоже батарейки есть, в фанеру поместятся
This is nonsense, the law of conservation of energy will tell you so.
NEWTON WANTS TO KNOW THIS GUY'S LOCATION
@@StealthBeeKid bro that is Faraday not Newton
perpetual motion, oh those brown hands are a dead giveaway🤣
creative think if you will attach the wire for few min i noticed that it will stop working
Am i right???????????😀😀😀😀😀😀😀😀
he make a home made rotor and install hiden battery to original rotor for use a battery. after connect org rotor(battery) to home made rotor, this working😁😁😁
muito legal, os fios estão por baixo da mesa !!!!
This is great. Why has no one done this before. This guy with cheap tools will bankrupt the energy companies. I’m going to make one 10 x bigger and get myself free energy for life !
but don't forget the batteries under the table ;-)
Lmao remember: Energy can neither be created nor destroyed.
Where can i buy the thrust modulation unit? Does that need to be connected to the gimbal bearings?
You can get them as bundle with a flux capacitor. Buying it all separate is too costly.
Its amazing - it produces an excess of electricity, even with those bearings and the shafts being unbalanced! Naturally it produces more power than it uses...😬
It is NOT energy free. Starts and stops after some seconts.
@@KarakasisFotios I was being sarcastic... 😄
WOW. While watching this video, some metal parts moved towards my monitor and all the light bulbs in the house started to glow. Out the window I can see my neighbor (with a pacemaker) suddenly walking twice as fast. Free energy is great!
However, now also some of my brain cells have left my head in a hurry...
I could watch this video endlessly!
А разве нержавеющая сталь 2А -70 магнитится?
May be by using a free battery he got as a gift and hiding under the wood ,you can still call this free energy 😂
When they attach the load (light) you can see it slows down so he quickly pulls the wire away. Under a load it will rapidly slow down and stop vs. without the load it will eventually slow down and stop.
Saludos desde Cartagena Colombia
Excelente
Pregunto,? Llegaron a implementar esto mismo??? Yo lo estoy haciendo pero tengo mis dudas al leer algunos comentarios..
Чудеса да и только!...
ЧУДО!!!
Алилуя!!!
Cyrano de Bergerac's fourth method of getting to the Moon:
"...seated on an iron plate, I toss a magnet into the air. The iron rises; I catch the magnet; toss it again; and so proceed indefinitely."
That will work about as well as this.
Now pick it up when it is running ! Ha you can’t because the wires underneath....
In what grade u are lad?
Show this to some flat earthers and they'll probably swear it's real.
Когда ты не видишь батарей, на это можно смотреть вечно
Could you supply this item on payment and from who and how to get it. Particulars
Lol there’s a parts list and links for every motor in every video description of his videos!
WoW !!! perpetual energy from a couple of strong neodymium....this is definitely an invention to solve Mankind's clean energy needs for Centuries..An Invention deserving a NOBLE PRIZE !.