ID-COOLING FROZN A410 DK CPU Cooler - Cool and better than stock!
Вставка
- Опубліковано 29 чер 2024
- ID-COOLING sent over the FROZN A410 DK to check out. This is a single tower, dual fan cpu cooler, rated for 230W. Check it out if your looking to replace your stock cpu heatsink. ID-COOLING has many other coolers to meet your needs if this one doesn't fit your application.
I compared this with a couple of tests to the AMD Wraith Stealth and the AMD Wratih Prism on the 5600X and 3800X respectively.
In these tests I used thermal paste from ThermalHero provided by BeQuiet! I did also test the Frost X25 from ID-Cooling which did a good job.
Let me know what cpu coolers your use, which ones you like and which ones you don't like!
You can check out A410DK using the following affilate links, using these benefits the channel at no additional cost to you, A huge thank you if you choose to use them!
A410-DK All Black CPU COOLER - amzn.to/4bb0pIg
ID Cooling Amazon Store - amzn.to/3JYrKkV
ASROCK AM4 Steel Legend Motherboard - amzn.to/4bc6rbz
AMD 5600X with Wraith Stealth Cooler - amzn.to/4bc6zYB
Here is a non-affiliated link to the ThermalHero Paste I used. I haven't used it enough yet to recommend it, but it performed ok in my opinion.
ThermalHero Ultra - a.co/d/8I62kaM
Check out www.idcooling.com/ for more info on ID-COOLING
SUBSCRIBE
ua-cam.com/users/Hardwareartis...
Check out my Amazon Store for more recommended products:
www.amazon.com/shop/hardwarea...
As Always, thanks for watching!!!
Chapter List:
00:00 Intro to A410DK
00:35 Technical details
02:19 What's in the box
03:08 Installation
07:59 Testing
09:54 Results
14:12 Conclusion - Наука та технологія
Thanks for the great review. I will be purchasing this cooler based off your review.
Thank you for this! I like how you used high clearance RAM, it really helped me since RAM clearance is huge factor in which cooler I pick.
Thanks eliasalcazar6554, I'm glad you found it helpful. Thanks for watching!!!
Hello! Yesterday I bought a Ryzen 7 5700x3D, to update my Ryzen 7 1700, now I am with the 1700 heatsink, which is the wraith spire, do you think this FROZN A410 would work for me in a summer in which the ambient temperature is about 30°? Or should I go directly for a 240mm water cooler? I'm from Argentina and the prices here are quite expensive, but the water cooler costs more or less twice as much as the FROZN A410.
What do you think?
p.s: I use it for games and for 3D print design.
I use this on my R5 5600 and don't mount it upside down, I have an inverted build and did this, I saw it had like scuff marks on the heat pipes from when I did this and my idle was like 59-51C, put it back the right way and is now at 38-40C. both are at 29C ambient tempts
HI skullcracked, thats good info. I'm glad you got it figured out and sounds like it's working good as expected. Thanks for watching!