4WD Holden Colorado Canopy Camping and Caravanning Setup

Поділитися
Вставка
  • Опубліковано 11 жов 2024
  • I have built this fridge and drawer system from marine ply, everything has a spot on the the L/H side there is the gas stove, this setup works better than expected and was relatively economical to purchase although time consuming to make, the extra wide side doors make access very easy, I did mention some water containers can be used for brown water but I actually meant grey water catchment from sink and shower, last point I am convinced the polythene plastic runners are both heavy duty and very functional in dusty environments, perfect for Australian conditions.

КОМЕНТАРІ • 15

  • @matiasbosshardt8888
    @matiasbosshardt8888 2 роки тому +1

    Nice rig and set up!

  • @craigjensen4179
    @craigjensen4179 3 роки тому +2

    That's a perfect setup, wish I had the skill to build something like that myself
    Great job 👍

    • @noproblem2big337
      @noproblem2big337  3 роки тому +2

      Thanks mate, I have since fitted a sliding water tap beside the table and a caravan water pump it came up pretty good, pity we've been in lockdown for ages, looking forward in using it!

  • @richardatkin8526
    @richardatkin8526 Рік тому

    Nice practical set-up

  • @noproblem2big337
    @noproblem2big337  3 роки тому +3

    I was going to mention, I have a small 12v whale submersible pump connected to a hose to easily transfer water from containers to the caravan and from rivers or streams to fill containers.
    Also for the drawers I found the best friction coefficient is best between aluminium angle and polythene side and bottom runners.

  • @mitchhoward-bath
    @mitchhoward-bath 3 роки тому +2

    Hello mate. Very impressed with your setup - well done. Has given me a few ideas for my 2018 Colorado which I am getting in a month or so. Cheers

  • @max503903
    @max503903 3 роки тому +1

    Very clever use of the space: where you put the fixed size elements on the sides and fill the remaining space with the drawers. I don't think I have seen anything smarter and cost efficient .

    • @noproblem2big337
      @noproblem2big337  3 роки тому

      Thanks massimo, this project came up better than expected, I tried to keep everything simple and functional...I have since fitted a retractable sliding water tap on the R/H side of the table (80x80mm) and a water pump, that also turned out very well:)

  • @snakesnake6799
    @snakesnake6799 3 роки тому +1

    best ute setup ever been thinking about doing the same but the mid drawer will be a kitchen

    • @noproblem2big337
      @noproblem2big337  3 роки тому

      Thanks...the sliding kitchen would be a great idea👍

  • @RGVJ21
    @RGVJ21 2 роки тому

    Nice setup. Is it dust proof? Im just trying to decide weather to put an aluminum canopy/traidie box and tray or a fuberglass canopy and tub like yours on my Colorado.

    • @noproblem2big337
      @noproblem2big337  2 роки тому +2

      Thanks...it's hard to say which is best tub or tray, my setup is much cheaper the fibreglass canopy itself has good dust protection, the problem is the tub has no dust seals, I have made a seal at the tailgate end and contemplating to also seal the front of the tub but still allowing for some drainage just in case I spill water, I'm in refrigeration and cool room door seals would do a good job and reduce dust ingress , of course a good strong fabricated aluminium canopy on a tray may be better specially if you want a heavy duty roof rack but it's big $$$