I work at a mill using the UMT (Universal milling technology) press, had to change a die and rolls for the first time the other day, was very interesting 😮
This looks a bit too industrial scale for a DIYer looking to eliminate the potential for bad ingredients in his dogs' food, but as an engineer I love these kinds of videos for all equipment.
Viva Tornearia Marília, Tudo bem? Antecipadamente peço desculpa por esta mensagem não solicitada. A Sizer Ltd. Tem mais de100 anos de experiência no mercado da peletização e pode fornecer peças adequadas para as máquinas das marcas CPM, Orbit, Van Aarsen, Simon Barron e Paladim, a preços muito competitivos. Estamos determinados a expandir a penetração em mercados internacionais. Por favor responda, indicando-me qual a marca da sua prensas de peletização e terei o maior gosto em oferecer as nossas melhores cotações para quaisquer peças sobressalentes que possa precisar. Acresce que, como seguramente é do seu conhecimento, as condições metereológicas extremas a que temos assistido, levaram a uma utilização antecipada dos stocks alimentares de inverno, já que ao gado não foi possível aproveitar os pastos, o que tem conduzido a um acréscimo na procura de rações. Naturalmente, se pensa que esta informação pode ser útil a alguém das suas relações, por favor, remeta-lhe os meus contatos. Na expectativa dos seus pedidos de cotação, Atentamente, Ben Mudd ben.mudd@sizer-eng.co.uk +44(0)1709 915 656
Takes a natural talent to operate a pellet mill,, I've used CPM and German Rangers,, if you stick a die on a Ranger be ready to get burned of you don't know what your doing,, Only way to unstick a clogged die is by motor oil and constant adding cracked corn until it starts spitting out your burned cubes or pellets,, and then have fire safety measures in place of those burning pieces get into the system,, always wet choke a die,, never dry choke them,, best way is by breaking in a new die with corn pellets or much cornmeal,, if you try running alfalfa through a new die be prepared for hell,, lol
I used to work at lignetics a wood pellet mill that ran 4 400 hp Pellet mills pretty much around the clock. It was a fine line between running the mills at optimum throughput and overfeeding them which of course would cause a plug. The best way we found to unplug the rings was a about a cup full of diesel fuel tossed into the ring while jogging. Of course those diesel soaked pellets would then have to be discarded.
@@michaelknight4041 Ah blockages ! Yes we love them, will see the Amps spike and then dump indicating a blockage. We use soy bean oil fat on our dimes whenever we open them for cleaning or after a blockage
Dear Sir/Madam, For your pellet machine inquiries, you can contatc to us via +90 553 4051010 (whatsapp) mobile number & +90 553 776 7770 (whatsapp) mobile number. (Or denizlileventmakina@gmail.com) ua-cam.com/video/g6EdknSl0ew/v-deo.html ua-cam.com/video/ZQUkDxAxDU0/v-deo.html ua-cam.com/video/8MTZWKeptIA/v-deo.html ua-cam.com/video/chmHFfxwov0/v-deo.html
That might be ok if you were selling the pellets. Way too much work to heat a house. Get wood, mix it grade it, additives, pelletize it dry them store them. It is crazy. Not to mention the pellet mill cost big bucks. REPLY
ua-cam.com/video/-QnqtfLakqA/v-deo.html Hello sir we are manufacturing for poultry cattle animals and fish mill plants and all kind of machinery or spear parts with motor gear pellet machine
@@abdullahqureshi1128 HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
ua-cam.com/video/-QnqtfLakqA/v-deo.html Hello sir we are manufacturing for poultry cattle animals and fish mill plants and all kind of machinery or spear parts with motor gear pellet machine
HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
That really depends on the size of mill, our 90Kw motor delivers 6 tph and 200Kw 12 tph. But and there's a big but it depends heavily of the type of feed that enters the mill also the quality and temperature of steam. Operating a pellet mill is sort of a balancing act you work your way up slowly till reach max amps. When it chokes you have gone too far. And some feeds doesn't work at all, usually the more oil you have in your feed the better it runs, and less chance of burning the die. Limestone is death to a die and blocks the holes. Hours of experience make for a good mill operator. The secret is not to let it choke or burn the die.
ua-cam.com/video/-QnqtfLakqA/v-deo.html Hello sir we are manufacturing for poultry cattle animals and fish mill plants and all kind of machinery or spear parts with motor gear pellet machine
ua-cam.com/video/-QnqtfLakqA/v-deo.html Hello sir we are manufacturing for poultry cattle animals and fish mill plants and all kind of machinery or spear parts with motor gear pellet machine
HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
A very good evening Mr Jaya Prasad , yes we surely do that . you can whatsapp me or mail me anytime . 9032791581 spicybrain01@gmail.com i will be more than happy to assist you at the earliest . have a nice day .
HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
@@namilukosikufele5960 HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
Worked at a feed mill that had two of these and we kept them running 24 hours a day, 6 days a week. Very reliable machine.
We have a California Pellet Mill and I've always wanted to learn more. Very interesting.
Hi, this pallets system is the best now in the market for acondicionador?
I work at a mill using the UMT (Universal milling technology) press, had to change a die and rolls for the first time the other day, was very interesting 😮
This looks a bit too industrial scale for a DIYer looking to eliminate the potential for bad ingredients in his dogs' food, but as an engineer I love these kinds of videos for all equipment.
I have a small industry in Brazil and I would like to make a machine like this. Congratulations on the project. You are good.
We also supply biomass pellet plant.If interested,conatct email:pelletmill02@tonyjixie.com whatsapp:+86-15854107688
ats@advantagesmachinery.com for feed project and biomass pellet project
Tornearia Marília - ProjMaking
Viva Tornearia Marília,
Tudo bem? Antecipadamente peço desculpa por esta mensagem não solicitada.
A Sizer Ltd. Tem mais de100 anos de experiência no mercado da peletização e pode fornecer peças adequadas para as máquinas das marcas CPM, Orbit, Van Aarsen, Simon Barron e Paladim, a preços muito competitivos.
Estamos determinados a expandir a penetração em mercados internacionais.
Por favor responda, indicando-me qual a marca da sua prensas de peletização e terei o maior gosto em oferecer as nossas melhores cotações para quaisquer peças sobressalentes que possa precisar.
Acresce que, como seguramente é do seu conhecimento, as condições metereológicas extremas a que temos assistido, levaram a uma utilização antecipada dos stocks alimentares de inverno, já que ao gado não foi possível aproveitar os pastos, o que tem conduzido a um acréscimo na procura de rações.
Naturalmente, se pensa que esta informação pode ser útil a alguém das suas relações, por favor, remeta-lhe os meus contatos.
Na expectativa dos seus pedidos de cotação,
Atentamente,
Ben Mudd
ben.mudd@sizer-eng.co.uk
+44(0)1709 915 656
Is it suitable for cellulose pellets? What kind of liquid do you add in case of cellulose pelleting?
Takes a natural talent to operate a pellet mill,, I've used CPM and German Rangers,, if you stick a die on a Ranger be ready to get burned of you don't know what your doing,, Only way to unstick a clogged die is by motor oil and constant adding cracked corn until it starts spitting out your burned cubes or pellets,, and then have fire safety measures in place of those burning pieces get into the system,, always wet choke a die,, never dry choke them,, best way is by breaking in a new die with corn pellets or much cornmeal,, if you try running alfalfa through a new die be prepared for hell,, lol
In my line of work we use ground corn, fine sand and liquid fat to break in new dies .
I run both our press lines at around 24tph around 300Amps
I used to work at lignetics a wood pellet mill that ran 4 400 hp Pellet mills pretty much around the clock. It was a fine line between running the mills at optimum throughput and overfeeding them which of course would cause a plug. The best way we found to unplug the rings was a about a cup full of diesel fuel tossed into the ring while jogging. Of course those diesel soaked pellets would then have to be discarded.
@@michaelknight4041 Ah blockages ! Yes we love them, will see the Amps spike and then dump indicating a blockage.
We use soy bean oil fat on our dimes whenever we open them for cleaning or after a blockage
Sir kon si site se buy krna he
How much and what is your location?
Kindly send video for electrical trouble shooting of pellet mill. And Hammer mill
May you avail me a price list soon as possible, thank you
May I know how much is your machine, and how much would it cost to ship in the Philippines?
Dear Sir/Madam,
For your pellet machine inquiries, you can contatc to us via +90 553 4051010 (whatsapp) mobile number & +90 553 776 7770 (whatsapp) mobile number. (Or denizlileventmakina@gmail.com)
ua-cam.com/video/g6EdknSl0ew/v-deo.html
ua-cam.com/video/ZQUkDxAxDU0/v-deo.html
ua-cam.com/video/8MTZWKeptIA/v-deo.html
ua-cam.com/video/chmHFfxwov0/v-deo.html
I thought it said “Pet Mill” and once I saw the “Die chamber” I was like WHAAAT NO
I wish my job would upgrade our machines we have so tired of the out dated ones i am using at work
It can be used for hop pelletizing?
look here and subscribe and share ..videos here
Yes. A smaller unit would work fine, unless its for a huge brewery..
That might be ok if you were selling the pellets. Way too much work to heat a house. Get wood, mix it grade it, additives, pelletize it dry them store them. It is crazy. Not to mention the pellet mill cost big bucks.
REPLY
How much cost
@@affanmtm2927 you c an contact whatsapp/wechat 86 158 6389 8993, then I can introduce our pellet mill for you
amazing this machine.. i have redesign this machine in small bacht for my study
ua-cam.com/video/-QnqtfLakqA/v-deo.html
Hello sir we are manufacturing for poultry cattle animals and fish mill plants and all kind of machinery or spear parts with motor gear pellet machine
What is the normal output temperature of the pellets?
normally it is about 80-90 degrees .
We also supply biomass pellet plan,If you are interested, you can contact me. whatsapp 0086 186 6890 3529
@@abdullahqureshi1128 HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
170-180f
75-90C
How much is that machine?
look here related info and subscribe
Rather ask what spares cost. You will spend more on spares than the actual machine itself over its lifetime.
Hi , is possible make pellet of Eucaliptus woodchips ?
ua-cam.com/video/-QnqtfLakqA/v-deo.html
Hello sir we are manufacturing for poultry cattle animals and fish mill plants and all kind of machinery or spear parts with motor gear pellet machine
What is the price off pellets mill
HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
1.5 cr
That’s more bigger and more expensive then what we have at the mill I work for which it isn’t that’s bad
This is also how imitation blueberries are made the kind you see in muffins
Wonder what it's tonnage per hour is...
That really depends on the size of mill, our 90Kw motor delivers 6 tph and 200Kw 12 tph. But and there's a big but it depends heavily of the type of feed that enters the mill also the quality and temperature of steam. Operating a pellet mill is sort of a balancing act you work your way up slowly till reach max amps. When it chokes you have gone too far. And some feeds doesn't work at all, usually the more oil you have in your feed the better it runs, and less chance of burning the die. Limestone is death to a die and blocks the holes. Hours of experience make for a good mill operator. The secret is not to let it choke or burn the die.
@@mj3299I run both our presses at about 24tph max output, a nice 300Amps
What size pellets? 300 Amps on each machine? What Voltage?@@BettySwollocks14
Thanks in a million. Great content. Awesome. Grade: A++💥
how much price this machine
ua-cam.com/video/-QnqtfLakqA/v-deo.html
Hello sir we are manufacturing for poultry cattle animals and fish mill plants and all kind of machinery or spear parts with motor gear pellet machine
Price...?
ua-cam.com/video/-QnqtfLakqA/v-deo.html
Hello sir we are manufacturing for poultry cattle animals and fish mill plants and all kind of machinery or spear parts with motor gear pellet machine
HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
@@GHindustries please contact Andritz.com, we'll help you with your requirements
Good machines 👍
Very nice machin
Worst mill ever just spent millions getting kalhs
It's so cool machine ☺️
Nice machine good work
do u sell dies??
A very good evening Mr Jaya Prasad ,
yes we surely do that .
you can whatsapp me or mail me anytime .
9032791581
spicybrain01@gmail.com
i will be more than happy to assist you at the earliest .
have a nice day .
How much is this machine in USD ???
HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
@@namilukosikufele5960 HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
look here and subscribe
Thank you UA-cam algorythm
Nice
great operation ....it is interesting
Good
Belarus 2021 OAO Xoldingovaya kompaniya Zabudova
Pellets wood chips
wrong
there is no such thing called gravity!!!!
its called density and buoyancy.
What
HEllo Sir we are manufacture for poultry cattle fish mill plants and all kind of machinery or spear part any time any information contact me us 092301-6367000 or 0092300-7448688
yea
I made it myself thanks to woodprix website.
Anyone here because of Mrs. Jenson?
Mantap