Thanks for the video! : ) If I'm not that close to an airport, would I be still able to hear transitions from flying by planes with a few meters long cable antena ?
You should NEVER use a metal screwdriver on ferrite cores as this might damage the cores. Also using a metal screwdriver will change the inductance of the core. There are plastic ones available
please tell how you get sound out the board without using a thing called a loud speaker, you have made a nice job of it but please keep it truthful and don't try to show something that is not true
Good morning, I have a question. All these kites I see, there is always a continuous noise when not getting. Is this kit also like this or is there a process that eliminates noise when not receiving?
I got mine with aluminum case for $21 with free shipping. You should never use a metallic screwdriver while adjusting the IF transformer, ceramic are cheap on amazon.
Hello and thank you for your video. I build the receiver, I have noice thru my headphones sp it works. The problem I have is that when I turn the middle pot (coded SQ) I get a loud tick noice about mid way and then dead silence. So the SQ pot is usable for me for only half of the available turn. Any ideas? I went to a nearby airport but I was unable to hear any conversations but I did hear a taxi driver passing by! So I think the rest is a matter of try and error of fine tuning. Thank you, Yiannis.
Hello everyone! In this video, I will show you how to build your own DIY Air Traffic Control receiver for just 15 dollars. Hope you enjoy, and please tell me what you think about the video!
are we really supposed to think you are in front of an airport? yes, that's right I can tell there is a green screen. the audio has to much reverb so it sounds like your in a mall room and the light does not match.
Bought one of these kits, what a nightmare! Resistor colour bands with colours that are unclear, odd values of components that don't correspond to content sheet, needless to say it didn't work, waste of cash!
Minuto 4:09 se escucha comunicación sin haber conectado salida de audio a reproductor! Admirable el enlace inalámbrico! Un genio!
Thanks for the video! : ) If I'm not that close to an airport, would I be still able to hear transitions from flying by planes with a few meters long cable antena ?
3:53 The screwdriver is not even turning the IF coil's tuning slug. WTF ?
this guy has no speaker how hear voice?
You should NEVER use a metal screwdriver on ferrite cores as this might damage the cores. Also using a metal screwdriver will change the inductance of the core. There are plastic ones available
How do I add a frequency meter so that tuning is more accurate ?
please tell how you get sound out the board without using a thing called a loud speaker, you have made a nice job of it but please keep it truthful and don't try to show something that is not true
How does it work without a speaker
I know its not a fake but how it will make noises wothout a speaker
I plugged in headphones :)). Those noises were from another audio I don't live close to an airport...
Good morning, I have a question. All these kites I see, there is always a continuous noise when not getting. Is this kit also like this or is there a process that eliminates noise when not receiving?
i dont think kites use radio communications
I got mine with aluminum case for $21 with free shipping. You should never use a metallic screwdriver while adjusting the IF transformer, ceramic are cheap on amazon.
3:07 "use a non metalic tool to adjust the coil " i see you are using a metalic tool.. :-D :-D
Hello and thank you for your video. I build the receiver, I have noice thru my headphones sp it works. The problem I have is that when I turn the middle pot (coded SQ) I get a loud tick noice about mid way and then dead silence. So the SQ pot is usable for me for only half of the available turn. Any ideas? I went to a nearby airport but I was unable to hear any conversations but I did hear a taxi driver passing by! So I think the rest is a matter of try and error of fine tuning. Thank you, Yiannis.
Is it legal to use this airband receiver
Receiver yes, but transmitter no
Hello everyone!
In this video, I will show you how to build your own DIY Air Traffic Control receiver for just 15 dollars.
Hope you enjoy, and please tell me what you think about the video!
How stable is the tuning on this unit? Does it drift substantially?
Where is the second part.?
Where is your speaker ?
cool
are we really supposed to think you are in front of an airport?
yes, that's right I can tell there is a green screen. the audio has to much reverb so it sounds like your in a mall room and the light does not match.
I’m sorry to say that but it’s so fake
1 you have no speaker
Bought one of these kits, what a nightmare! Resistor colour bands with colours that are unclear, odd values of components that don't correspond to content sheet, needless to say it didn't work, waste of cash!
what exactly didn't work? Everything worked perfectly for me...
fake
fake?? Why fake?
i have tried it and it did not do nothing
because i tried it
@@maxmaycroft9917 u did it wrong lol