I noticed you didn’t erase the data first you just went straight to write any particular reason for that? I’m supposed it’s not best to erase then write Edit: actually I see you answered this in a similar question below which is what I assumed. It’s going to overwrite the originals when it’s writes anyways. Thanks so much for sharing man. Very good tutorial as always
I'm subscribing now. this tech knows a lot. thanks for sharing your knowledge. Back in the days. Technicians will take their knowledge to heaven with them because they couldn't take their money.
No, not at this type of programming. Gbox emulates obd2 port as a breakout box. This is directly UART or JTAG programming which reading and writing the MCU directly.
Great toturial, my question why You didn't read first damaged SAM from vehicle, and transfer data to 'new one'. Also the donor must be virginized before action? Or I misunderstood something, Thank You
I actually read the original one first because the shop that I was doing the job for installed the new one to car already thinking it can be done by obd. If you want to do obd programming with Xentry than yes you can virginize it by pressing clear Sam and put it in the car and do obd programming. If you want to just clone them you do not need to virginize it im608 will just overwrite the files.
To do programming with star xentry Mercedes Benz software you need to have access to Daimler login ID which is under license programming what we don’t have only Mercedes Benz technicians have is better cloning it I think
I am trying to clone a front SAM on a 2005 Merc CLK500 coupe using an Autel 608 Pro. I have followed your instructions, but when I select 'other' in the final menu that you show, the W209>Front-SAM-COMPUTER>RW does not appear, only selected Mercedes models and functions. Can you show how to access the W209>Front-SAM-COMPUTER>RW to achieve what you are demonstrating for the W221?
If you do this with new one it would also solve the problem or else you would need Xentry (Factory tool) to program and code it. Some after market scan tools can do SCN coding through OBD but not really reliable. Some of this ECU’s also plug and play as long as ECU is new.
Hello , do you have a number or an account that I can contact you with ? My question is I have a 2019 silverado and I want to install an oem fog light kit but after the installation the bcm need to get flashed in the dealership so they can enable the fog light option and also to enable it in the instrument cluster unfortunately the dealership in my country is too stupid to do it and when I ask them if they have this service they say No and it will get out of warranty if i tried to install anything that related with the electronics So please answer me if you can help because i saw your video on the gm bcm reprogramming and I wanted to ask you if you can help me plus I will pay for your help if tell how to do it Thanks
Thank you for making the video. I am about to do the same for my car's new SAM. S-class w221 2007 model. I will follow all steps carefully.
I noticed you didn’t erase the data first you just went straight to write any particular reason for that? I’m supposed it’s not best to erase then write
Edit: actually I see you answered this in a similar question below which is what I assumed. It’s going to overwrite the originals when it’s writes anyways.
Thanks so much for sharing man. Very good tutorial as always
Thanks for posting this :)
Are you located in the US? I'd like to contact you to discuss a possible retrofit from my MB S550 (W221). Thanks!
I'm subscribing now. this tech knows a lot. thanks for sharing your knowledge. Back in the days. Technicians will take their knowledge to heaven with them because they couldn't take their money.
Do you know where they are located I need my car to get fix?
whats the point from Online programing if we need to clone the old module ? may you explain me that ?
good job
Hello, thanks a lot for your videos. May I ask if a GBOX2 can be used instead of the XP400?
No, not at this type of programming. Gbox emulates obd2 port as a breakout box. This is directly UART or JTAG programming which reading and writing the MCU directly.
Great toturial, my question why You didn't read first damaged SAM from vehicle, and transfer data to 'new one'. Also the donor must be virginized before action? Or I misunderstood something, Thank You
I actually read the original one first because the shop that I was doing the job for installed the new one to car already thinking it can be done by obd. If you want to do obd programming with Xentry than yes you can virginize it by pressing clear Sam and put it in the car and do obd programming. If you want to just clone them you do not need to virginize it im608 will just overwrite the files.
@@huyug1 Thank You for clarification, just every day is learning in this branch 😁😁 never done this before on this vehicle before.
To do programming with star xentry Mercedes Benz software you need to have access to Daimler login ID which is under license programming what we don’t have only Mercedes Benz technicians have is better cloning it I think
Great Video, just wondering though…. is there any way to do this on the W203 generation, got a 2004 C320 compressor and need to program the front Sam
I am trying to clone a front SAM on a 2005 Merc CLK500 coupe using an Autel 608 Pro. I have followed your instructions, but when I select 'other' in the final menu that you show, the W209>Front-SAM-COMPUTER>RW does not appear, only selected Mercedes models and functions. Can you show how to access the W209>Front-SAM-COMPUTER>RW to achieve what you are demonstrating for the W221?
puoi mandarmi lo schema per sam retro per programmarla grazie
Would you have to do this if the Sam was new from the dealer?
If you do this with new one it would also solve the problem or else you would need Xentry (Factory tool) to program and code it. Some after market scan tools can do SCN coding through OBD but not really reliable. Some of this ECU’s also plug and play as long as ECU is new.
one question i have a 2010 s550 mercedes can i use the used fuse box and the original sun module or do i also have to program the fuse box
Where are you located I have the same issue with my Mercedes Benz
Can you do this job with im508?
will an autel im508 work?
Hello , do you have a number or an account that I can contact you with ?
My question is
I have a 2019 silverado and I want to install an oem fog light kit
but after the installation the bcm need to get flashed in the dealership so they can enable the fog light option and also to enable it in the instrument cluster unfortunately the dealership in my country is too stupid to do it and when I ask them if they have this service they say No and it will get out of warranty if i tried to install anything that related with the electronics
So please answer me if you can help because i saw your video on the gm bcm reprogramming and I wanted to ask you if you can help me plus I will pay for your help if tell how to do it
Thanks
Yes definitely, contact me at +13472650322