@@СЕРЕГАГОЛОВОРЕЗ it seems that it is extremely dangerous, it is considered very carcinogenic, I was looking forward to get some but looks like I go with other precipitants
Hi man i started gold recovery watching your videos and I have one request could you let me know what percent of HCL you use is normally available sold in bottle or specific 28 and nitric of 68 percent also which urea is better to neutralize nitric is it that we use in field or lab also which water to be used is it tap water or warm boiled water please explain this basic in next video and is their a way to contact you. Love your work keep posting video lots of from india
why did you dissolve what was recovered from the connections, it was already pure gold, it just needed to be melted together with what was obtained from the IC chips
It's not pure, it only looks that way. In most cases it will be 18k+ . Why? The base metal is not perfect, gold gets in and below the base metal during the plating process. That gold traps and protects some of the base metal from the HNO3. Always, not maybe, but always. Think gravel on a road. That's the base metal. Then you cover it with sand (the gold). Some of the gravel will become completely encased in the sand. So the HNO3 has no way to get to the gravel. I have tested it more times than I can count. Always less than 24k but higher than 18k. Never 24k. Contamination is nickle and copper under Xray. Yes the plating is 24k but it always traps some of the base metal.
@@joek511 if you want to have flashy 24k gold then maybe so but why? although I don't know if it's like you say because this layer is so extremely thin that the acid etches it through through the gold plating so it should easily etch out any impurities. If you want to sell it then they will simply pay proportionally less for 18k, of course if you have more of it because such peas of 1-2g it will be hard to sell Is gold wire from IC chips also 18k? most refiners also play around with nitric acid and multi-stage process unnecessarily when it is enough to etch it in H2SO4 and then melt it down.
ممنون از راهنماییتون من اول با اسید سولفامیک اسید تیزاب رو خنثی کردم و بعد با متابی سولفیت مرحله رسوب گیری رو انجام دادم ولی یه چیزی مثل گِل ته ظرف جمع میشه که وقتی به هم میزنم دوباره توی محلول حل میشه باید چکار کنم ایا اشتباه رسوبگیری رو انجام دادم برای تیزاب که رنگش تیره هست؟
سلام استاد شما از ۱.۶ کیلوگرم ۲.۴۵ گرم طلا بدست آوردید در حالی که در فیلمهایی از یک کیلو کمتر از یک گرم طلا بدست آوردن دلیلش چیست و چگونه کیفیت ای سی رمها رو تشخیص دهیم از جواب و راهنمایی استاد متشکرم .
@@rbailey4709 There are some proprietary non acid e-waste gold recovery chemicals for sale that he might be using, so its worth asking. Hopefully friend here answers the question some time soon to satisfy my curiosity.
13:18 "MIX SMB" what did you use ?
sodyum meta bisulfit and hot water brother
@@ImanGoldRecovery Thank you. good luck ❤
why use hydrazin hydrate and not other precipitants?
Так как он быстро и лучше выводит металы из разтвора и осождает легко.
Because it quickly and better removes metals from the solution and precipitates easily.
👍👍🌹
@@СЕРЕГАГОЛОВОРЕЗ it seems that it is extremely dangerous, it is considered very
carcinogenic, I was looking forward to get some but looks like I go with other precipitants
موقع درست کردن تیزاب چرا بهش اسید سولفوریک اضافه کردید؟
و برای تیزاب کردن مقدار هر کدوم از اسیدها چقدر باید باشد؟
@@هدایتنیکپور دلیل اضافه کردن سولفریک خارج کردن احتمالی سرب از محلولم هست
@@ImanGoldRecovery ممنون
مقدار هر یک از اسید ها برای ساخت تیزاب باید چقدر باشد؟
Hi man i started gold recovery watching your videos and I have one request could you let me know what percent of HCL you use is normally available sold in bottle or specific 28 and nitric of 68 percent also which urea is better to neutralize nitric is it that we use in field or lab also which water to be used is it tap water or warm boiled water please explain this basic in next video and is their a way to contact you. Love your work keep posting video lots of from india
Воду лучше использовать дистилированную
@@СЕРЕГАГОЛОВОРЕЗthanks brother
How to buy hydrazin hydrate
Piekny wynik! Jakby zawsze tak to tego zlota byś miał kilka kilo 😅
thanks for eatching my video brother
Bardzo dobry wynik też będę szykował się do podobnego filmu
@@czterystronyzomu5100no to ucz się, doswiatczeniebw cenie. Czekam na ten film.
Posrebrzane elementy zbieram ile trzeba uzbierać byś byl zadowolony?
@@czterystronyzomu5100 🌹🌹🌹🌹❤👍
why did you dissolve what was recovered from the connections, it was already pure gold, it just needed to be melted together with what was obtained from the IC chips
It's not pure, it only looks that way. In most cases it will be 18k+ . Why? The base metal is not perfect, gold gets in and below the base metal during the plating process. That gold traps and protects some of the base metal from the HNO3. Always, not maybe, but always. Think gravel on a road. That's the base metal. Then you cover it with sand (the gold). Some of the gravel will become completely encased in the sand. So the HNO3 has no way to get to the gravel. I have tested it more times than I can count. Always less than 24k but higher than 18k. Never 24k. Contamination is nickle and copper under Xray. Yes the plating is 24k but it always traps some of the base metal.
@@joek511 if you want to have flashy 24k gold then maybe so but why? although I don't know if it's like you say because this layer is so extremely thin that the acid etches it through through the gold plating so it should easily etch out any impurities. If you want to sell it then they will simply pay proportionally less for 18k, of course if you have more of it because such peas of 1-2g it will be hard to sell
Is gold wire from IC chips also 18k? most refiners also play around with nitric acid and multi-stage process unnecessarily when it is enough to etch it in H2SO4 and then melt it down.
Good job man🌹👍
@@PickyPlans thanks for watching broooo
سلام اگر موقع تیزاب گرفتن به جای رنگ زرد رنگ تیزاب تیره شد باید چکار کنیم برای رسوب گیری و دلیل اینکه رنگ تیزاب تیره میشه چی هست
vojode felezate mozahem hatman dar in marhale az smb estefade konid
ممنون از راهنماییتون
من اول با اسید سولفامیک اسید تیزاب رو خنثی کردم و بعد با متابی سولفیت مرحله رسوب گیری رو انجام دادم ولی یه چیزی مثل گِل ته ظرف جمع میشه که وقتی به هم میزنم دوباره توی محلول حل میشه باید چکار کنم ایا اشتباه رسوبگیری رو انجام دادم برای تیزاب که رنگش تیره هست؟
Mükemmel çalışmalarından dolayı tebrik ederim son video,larını bekliyoruz
teşekurler efendi 🌹
My 55kg RAM box approves of this
its very good brooo 🌹🌹🌹
افرین ایمان داداش گل
agha mehdiye aziiiza 🌹🌹🌹
Maximum 1.3 gram per kg ram in gold only server rams
thanks for the info bro 👍
Mantap bos 🙏👍
Makasih 👍
عالی ❤
🌹🌹🌹🌹
سلام ایمان جان میشه به جای هیدرازین هیدرات ار smbاستفاده کرد
@@hosainmosavi9587 بله دوست عزيز در مرحله دوم از رسوب دهنده خاي ديگه به جاي هيدرازين ميتونيد استفاده كنيد
سلام استاد شما از ۱.۶ کیلوگرم ۲.۴۵ گرم طلا بدست آوردید در حالی که در فیلمهایی از یک کیلو کمتر از یک گرم طلا بدست آوردن دلیلش چیست و چگونه کیفیت ای سی رمها رو تشخیص دهیم از جواب و راهنمایی استاد متشکرم .
@@سیدجلیلمیرکاظمنژادفروهی دوست عزيز تايتل رو مطالعه كنيد اينه رم هاي سرور هستند كه دو برابر رم هاي معمولي چيپ دارند
Some server rams has GPU on it 😂😂
@Randompcthing 🌺🌺🌺
"Tin Cleaner Solution". Do you mean HCl or something else, my friend?
Mystery solution I guess...
@@rbailey4709 There are some proprietary non acid e-waste gold recovery chemicals for sale that he might be using, so its worth asking. Hopefully friend here answers the question some time soon to satisfy my curiosity.
Привет у меня весы такие китайские как и у тебя они врут вес точный не дают
😂😂
Wrong
😒😒😒
🎉🎉🎉
thanks bro
عالی ❤
ممنون از شمت