Steven, thanks for your comment. Are you getting any error code on your topside? Is you pump coming on and staying on? You may be having a pressure switch issue. Let me know what's going on with your tub. I'd be glad to help.
I am having the same problem as Steven noted below. After replacing a bad cap on the pump and refilling get an ICE error. The water temp shows "00". I may have damaged a sensor in moving the pump/ Would a bad temp sensor keep the heater from coming on?
Bill, you might have a bad sensor but you usually get a problem like “00” displaying when the topside isn’t making a solid connection to the circuit board. A lot of times, cleaning the plug for the topside fixes this. If not, then replace the topside. If it's still not working; then replace the sensors.
So i love the video i have a lx-15 and the heater is not turning on i am not getting any volts to the heating element and the light will come on for a second on the control panel then you hear a click and it shuts off and about every 30 sec or so it will try to turn the heater on again is it the element?
Hi! My mom has this same spa pack and it's blowing the small fuse (not the larger 20 amp fuse). I have no power to the top side display (I think because the fuse is blowing). Any ideas why? Thx!
You need to isolate the transformer to see if it's bad. Put in a new fuse and unplug everything but the transformer. If it blows, you need a new transformer Once you've done this call me to discuss the results: 1-877-277-5189 AJ
How do I troubleshoot a system. I hear clicking noise when I push the button for pump and blower but nothing happens.
Check for voltage at the motor or motor plug on the pack then call me at: 1-877-277-5189 Here to help anyway I can. AJ
Steven, thanks for your comment. Are you getting any error code on your topside?
Is you pump coming on and staying on? You may be having a pressure switch issue. Let me know what's going on with your tub. I'd be glad to help.
I am having the same problem as Steven noted below. After replacing a bad cap on the pump and refilling get an ICE error. The water temp shows "00". I may have damaged a sensor in moving the pump/ Would a bad temp sensor keep the heater from coming on?
Bill, you might have a bad sensor but you usually get a problem like “00” displaying when the topside isn’t making a solid connection to the circuit board. A lot of times, cleaning the plug for the topside fixes this. If not, then replace the topside. If it's still not working; then replace the sensors.
Can I replace a cracked black PVC locknut (discharge side)? with a 2" split nut? Thanks
+MrHeffries Yes you can. Here is the link to order: www.hottubparts.net/heater-split-nut-2.html
So i love the video i have a lx-15 and the heater is not turning on i am not getting any volts to the heating element and the light will come on for a second on the control panel then you hear a click and it shuts off and about every 30 sec or so it will try to turn the heater on again is it the element?
Hi! My mom has this same spa pack and it's blowing the small fuse (not the larger 20 amp fuse). I have no power to the top side display (I think because the fuse is blowing). Any ideas why? Thx!
You need to isolate the transformer to see if it's bad. Put in a new fuse and unplug everything but the transformer. If it blows, you need a new transformer
Once you've done this call me to discuss the results: 1-877-277-5189 AJ
You are correct!!!
Could be either the transformer or topside control. Call me to discuss. 1-877-277-5189 AJ