How to calculate the power supply by the led size ,some are we may want to make big and some are small on that way we need to know the power supply , I saw lots of led rgb led screen but still I don't know how the power supply needed
Dont know if anyone gives a shit but if you guys are stoned like me atm then you can watch pretty much all the new movies on InstaFlixxer. Been streaming with my gf for the last couple of days xD
So, I calculated 10m of high density (204 LEDs/m) 3014 LED strip will run an hour on a 10.000 mAh LiPo. Given they use 250mW pr. 5 meters or 3.14 ft every 3-4 minutes. I could be wrong, I was never good at math... But that does not seem very effective?
Steve Million Thanks. I am doing text moving display very well with 16 X 32 cm module. Have seen many DIY video panel project but I can't get the meaning. Yes today I watched your video and understanding much more than before. I will order the same parts in here and will do it as soon as I receive the items. Will inform you a good out coming in soonest. I wish you good luck.This is Harry from Chiang Rai.
Hello. Plz help me out with,How to progarm WS2812b Led strip in Lededit 2014 or 2013.As in the Lededit programmer WS2812b is not an option. But still many are using those strips for Led displays. It would be a grate help is you upload a tutorial working with WS2812b Led strips showing how to program it.
Hi Steve. First of all, great project! But I need your help if possible. I also got myself two WS2812B rolls and a T1000S controller but I can't get it to work. I think my problem lays in the software part. I used LedEdit2014 and exported my project as a WS2011 because WS2812B wasn't an option. If I put it all together the error light on the T1000S starts blinking and sometimes only the first LED comes on white, but that's about it. I checked alot of videos and thought that the WS2812B strips won't work with the T1000S but you proved me wrong. So, how do I correctly export the .led file to make this work? Thanks!
First make sure you format your SD card as fat32. When you export your files, the files you will want to save to your SD card will be the files that look like 00_xxxxx.led, 01_xxxxx.led, 02_xxxxx.led ...etc...(where xxxxx is the name of the program). You can have up to 16 programs per SD card. The T1000S controller will usually start with the first program and will only change to the next program when you press the MODE button. Then when you press the SET button, the program that is running will be the default program that the T1000S will start with when powered up.
Dj Zambiey depends on LEDs per inch/meter your strip is. I figure approx 2 LEDs across = 1 LED length down. Hope that helps. That should get you an approx 16x9 display.
chriscrowderguitar it seems he spliced into a single 5v transformer and connected it halfway through the array, both gnd and 5v. It’s a 15 amp transformer, but you could likely get away with less amperage, so long as it’s 5v.
+Fabrizio Bau Hi this is jelena who work with LED strip . Yes, DMX decoder need match with DMX controller , if you use T1000s digital controller , you can control it alone . T1000s can control 2024 pixels, what kind of digital strip(ws2812/ws2801/lpd8806/apa102) do you want control ? Does your T-1000s controller is matched with digital strip ? Any question will be much appreciated it . Have a nice weekend . Best Regards Jelena Whatsapp: +86 13802257769
hi.thanks for sharing this wideo i need your help.you you find this dancing girl effect i have t1000s and led edit software but there is no this effects
Truly a good man with a heart of gold to teach us this. Thank you.
AWESOME PAL! was looking into this to incorporate for yard amusement ride for granddaughter and family...and friends!!!
You are living a good life. So many wish to be in your shoes.
That looks amazing. It came out great. Thanks for sharing.
Try turning the brightness down on the lights. Makes it easier for the camera to see.
Great video, you put a power Reinforcement every 150 LEDs? Thank you.
VERY WELL DONE SIR
How to calculate the power supply by the led size ,some are we may want to make big and some are small on that way we need to know the power supply , I saw lots of led rgb led screen but still I don't know how the power supply needed
I just joined!👍🏻
Great video.
I want to make a smaller LED panel....maybe 16” by 16” square to fit a project.
Led screen factory located in Shenzhen, China.
Email: sales01@aoyika.com
Website: www.aoyika.cn
Whatsapp/Wechat:+86-181-1870-0596
This is so awesome! Great job! Keep up the great work!
Dont know if anyone gives a shit but if you guys are stoned like me atm then you can watch pretty much all the new movies on InstaFlixxer. Been streaming with my gf for the last couple of days xD
@Santana Mayson yup, I've been using InstaFlixxer for since november myself :)
@Santana Mayson Definitely, have been using instaflixxer for years myself :)
@Santana Mayson definitely, I have been using instaflixxer for months myself :D
@Santana Mayson yup, I have been using InstaFlixxer for years myself :D
can i put gifs into the t1000s?
Loved your video, Cheers.
You are freaking awesome
LEDEdit program has screen capture capability. Just capture and save as T1000 type program.
So, I calculated 10m of high density (204 LEDs/m) 3014 LED strip will run an hour on a 10.000 mAh LiPo. Given they use 250mW pr. 5 meters or 3.14 ft every 3-4 minutes. I could be wrong, I was never good at math... But that does not seem very effective?
Steve Million Thanks. I am doing text moving display very well with 16 X 32 cm module. Have seen many DIY video panel project but I can't get the meaning. Yes today I watched your video and understanding much more than before. I will order the same parts in here and will do it as soon as I receive the items. Will inform you a good out coming in soonest. I wish you good luck.This is Harry from Chiang Rai.
I need to make this project.RGB 5050..from where I get controller in Pakistan
Hi i ned your help
nice project
How to decode video output of rapsberry pi to drive led pixel address by address ??
Hello. Plz help me out with,How to progarm WS2812b Led strip in Lededit 2014 or 2013.As in the Lededit programmer WS2812b is not an option. But still many are using those strips for Led displays. It would be a grate help is you upload a tutorial working with WS2812b Led strips showing how to program it.
Select WS2811, same programing codes.
Many other UA-cam posts with Lededit20xx instructions.
Sweet!
Good job
Hi Steve. Awesome video. Is there any way that the led display. Display live video. Mirror a laptop?
With t300k controller
Hi Steve. First of all, great project! But I need your help if possible. I also got myself two WS2812B rolls and a T1000S controller but I can't get it to work. I think my problem lays in the software part. I used LedEdit2014 and exported my project as a WS2011 because WS2812B wasn't an option. If I put it all together the error light on the T1000S starts blinking and sometimes only the first LED comes on white, but that's about it. I checked alot of videos and thought that the WS2812B strips won't work with the T1000S but you proved me wrong.
So, how do I correctly export the .led file to make this work? Thanks!
First make sure you format your SD card as fat32. When you export your files, the files you will want to save to your SD card will be the files that look like 00_xxxxx.led, 01_xxxxx.led, 02_xxxxx.led ...etc...(where xxxxx is the name of the program). You can have up to 16 programs per SD card. The T1000S controller will usually start with the first program and will only change to the next program when you press the MODE button. Then when you press the SET button, the program that is running will be the default program that the T1000S will start with when powered up.
How far apart should each led strip be
Dj Zambiey depends on LEDs per inch/meter your strip is. I figure approx 2 LEDs across = 1 LED length down. Hope that helps. That should get you an approx 16x9 display.
Bubba's World not really I was hoping to make a 1m x 2m display
Steve how do wire in the other 2 voltage boosting wires
chriscrowderguitar it seems he spliced into a single 5v transformer and connected it halfway through the array, both gnd and 5v. It’s a 15 amp transformer, but you could likely get away with less amperage, so long as it’s 5v.
Hello Steve.How did you made the WS2812b led work as the LEDedit2014,2013 doesn't have that option for program its WS2811 plz help..
Ws28112B Addressable led strip www.alibaba.com/product-detail/Dual-signal-60Pixel-m-60leds-m_60614753093.html?spm=0.manage.list.91.328eb435j7H8yM
Email/skype:jessie@witop-tech.com
Hi, I purchased the T1000 Digital LED controller, but by linking to MYDJ 2.0 DMX does not work, as it gets to run with DMX controller?
+Fabrizio Bau
Hi this is jelena who work with LED strip .
Yes, DMX decoder need match with DMX controller , if you use T1000s digital controller , you can control it alone . T1000s can control 2024 pixels, what kind of digital strip(ws2812/ws2801/lpd8806/apa102) do you want control ? Does your T-1000s controller is matched with digital strip ?
Any question will be much appreciated it .
Have a nice weekend .
Best Regards
Jelena
Whatsapp: +86 13802257769
ws 2801
Yes
@@jelenazhao8800 you are wonderful
Marvellous project. Feel I could do,this with my retirement fun money. Would like to see a view from the road at night.
hi.thanks for sharing this wideo
i need your help.you you find this dancing girl effect
i have t1000s and led edit software but there is no this effects
You should use the music controller. as you know. we can provide that. learn more please contact Jessie@witop-tech.com/what's app:0086+15676178187
how you program it?
use the t1000s controller is ok,the controller have the sd card. the use the software,2016 led edit.
sir i want to making just like project for commercial purpose please help and
Y los archivos para bajar
epilepsia en 3 2 1
lakshmipathi