Discountutvtires.com 2008 Polaris Ranger service wrench reset / check engine light

How to reset the service wrench on your 2007-2011 polaris Ranger 700 and 800.
ToyJunkies can be found in all walks of like. Are you a Junky
www.toyjunkies.com
www.discountutv...

[@Allens_Outdoors]

thanks for the video, great content .. we have been wondering on the clock.. thanks ..

[@donfulton6330]

Thank you, bought used could not set clock or wrench your video is AWESOME

[@ajperry82]

Great video with HARD to find information! I have read my owners manual many times believing that the info on resetting the wrench HAD to be in there, needless to say, it wasn't. I haven't tried your remedies yet and I have a 2014 Ranger so it might be different, so once this snow melts I will try it and let you know what I find. I am bookmarking your video,
THANKS

[@9251finley1]

Great video! I poured over the owners manual looking for that info and never found it. Your video allowed me to clear the flashing service wrench and reset the maintenance reminder hour meter. Thanks.

[@anthonymartin4611]

This worked for a 2012 Polaris sportsman H.O. as well. Thanks for your advice!

[@WImilkmann]

Thanks for posting this! Didn't work exactly like that on my '07, but this helped me figure it out.

[@jayritzjr.6478]

I followed all your video and was able to reset the wrench but my check engine light is still on. How do I reset the engine light? Is there a different step I need to take? I have a 2013 Ranger Crew 500efi.

[@jesusadventurervargaspropu4510]

Gave a thumb up because it was helpful. Thanks alot

[@ScottElder1]

Thanks

[@ttwren7]

Liked your video, very helpful! But your intro was kind of long, (ie, e-mail address was posted and you still spelled it out... just a quick reference to it would work) and had me almost switching to another channel, glad I didn't, great info!! Thanks!

[@AlbertoClave]

Thank you for the help. I'll keep this videeo among my favorites so I can easily reach you in case I need more repair tips. Cheers !!!

[@farrenkimbrell3620]

Great video on ths reset service wrench and clock.

[@matthewbrown8327]

I know this is an older video, but is this Ranger super loud when moving forward not on the gas? Wondering if it is just my straight cut gears or if i have an issue. I just bought it

[@travis2528]

Videos what great, I need help maybe your able to help me. I put new plugs and plugs wires and new coils and it won't take gas it back fires when giving gas and the idol is bad.

[@jamesjones7042]

Any idea what would cause the AWD to flicker on and off when in turf mode or 2 wheel drive? Front diff is not engaging at all. Old differential shorted out where wires enter diff. It now has a new diff and switch but isn’t working.

[@LGBierly21989]

Thanks! Wanted to know how to do this, but didn't want to spend $ on a full manual!

[@rlwboxman]

Great video, you have any info on how to resolve overheating problems

[@tonywilliams7494]

Hey Scott this video worked great for me this is my second time using it and it worked both times Thanks

[@rayevans6897]

Great video and host. Now my clock is correct again.

[@davidyeakley7724]

I just bought a used 2002 Polaris 740 Sportsman. The engine timer runs 5 times longer than actual running time, i.e; i run it for 1 hour and the timer shows 5 hours of operation. Do you have a reason ? My mechanic said the battery is undersized, so I will buy a new battery. Is this the possible cause for the timer running so fast compared to actual run time ? Thank you.

[@MarkSmith-wu8rh]

How do you know if it’s in limp mode , I’ve had all kinds folks tell me my 700 is in limp mode cuz it won’t go over maybe 25mph , I know very little about the machines history because we got it from a guy who bought it at auction from the military . Do the military units have governors on em or is there something else goin on , I do know it’s got over 6,000 hours on it and the service engine light is on , all the time . I did the wrench reset but it’s still saying service engine 🤔

[@MarkSmith-wu8rh]

The belt is good the primary and secondary look to have been serviced “ there’s a date written in paint marker for 2010 inside the cvt cover . So far I’ve replaced the spark plugs and wires , intake tube from the throttle body to the top end , and both front cv axles . The oil needs to be changed and the filter , along with the air filter . But when you try to open it up it hits the rev limiter and only does maybe 25

[@coryclarke7381]

How do I pull the codes to find out why my 2007 ranger xp 700 isn't running properly. I'm trying determine if I have a bad sensor or some other problem. thanx

[@migke777]

Thanks!!!!! Worked on my 2008 RZR!

[@MrGrosnal]

thaks this was great ill check back whit ya wen looking for some thing esle thanks again

[@abigailflores3976]

Tanks for the video

[@brittanyfreed5309]

my Polaris wont crank in less you do it by the solenoid then it has engine light with oil message would you know what that is

[@MegaMikerojas]

Hey thanks, it worked on 2005 polaris sportsman 600 twin

[@kennethjohnson9653]

This video gave me more that the dealer did or the owners manuel. Thanks

[@TheQuadstyle]

Can you tell me how to reset a 2006 500 ranger efi don't have yellow button

[@bi4702]

Anyone know how to read the Diagnostics

[@jomonmonichan9012]

Hai brother how convert digree Celsius to Fahrenheit ranger crew 2011 pls

[@stephenburton9139]

have trouble with my 500 6x6 sportsman 2007 atv , i went out to start it and found out the battery was dead so hook up the boaster cable and notice that the rad fan was on with the key off which killed the battery. the odometer lite up but now its blank, the stator did turn but did not kick out to start the atv no power to anything else can , when i turn the key nothing happen, i did change the control module but no difference ,can you help, thanks

[@leonardsalazar554]

Thanks for the video I really appreciate it my wrench light did turn off I set my clock for 210 hours but my check engine light is still on again maybe the check engine light is supposed to stay on but the wrench light blinking wrench light did turn off should I be concerned about the check engine light thanks buddy

[@michaelthomas788]

You read the trouble codes on 2008 Rangers 800

[@ahankins19]

Thanks it worked on 12 sportsman 400

[@rikleavitt2966]

awesome! thank you for doing this for us

[@betohernandez5705]

Great Video

[@tonysmith878]

Great job. Thank you much.

[@dalepatrick3556]

Good stuff. Thanks

[@robertsands1345]

thanks for the help

[@yukonredneck]

Thank's it was really helpful.

[@MrDonnisforeman]

thank you now I know how to set the clock.... :)

[@diamondexcavatingconstruct5226]

Very helpful thx

[@dalebrannon2465]

Thanks

[@lecil75]

Hey it was real great thanks,

[@sheldonWAYNEhill]

thanks ill try this is

[@dspearcy]

rocks

[@canedham570]

Did not work on my 09

[@jcanuelkwnowitall]

the wrench reset did not work,now what

[@LavidadeLuiss]

alguien que me diga los pasos en español

[@HectorGonzalez-ji1ve]

Se ponen los los brakes se abre la llave sin que prenda

[@HectorGonzalez-ji1ve]

Se abre la llave

[@HectorGonzalez-ji1ve]

Con el botón presionado hasta que salgan números que son códigos

[@lukejohn52]

rock 101.3 ftw

[@ozz-y6c]

To much nonsense talking in the beginning 1min 47 sec b4 video starts