good video..could you give review on iscanÉ thank
I Have A 2011 X5 M. Same Problems, Now Do I Have To Replace Or Can It Be Reset? Plz Advise! 😎
My obd2 scanner says it doesn’t match the CAS AND THE FRM can this module be the cause my lights don’t work properly the flicker and the tire pressure works sometimes
where can i purchase this tool?
Hi sir need help with bmw e90 2012 cas3+ need to replace it with replacement what do i need to programme to match the replacement cas3+ to work with my car?
All the electric systems in my vehicle have been closed. Nothing works. Meter does not show anything. The car is not starting to start.
I do not understand what modular box was cut
I have a 09 x5 4.8 and im in canada.... can you reprogram the frm with out have-in the car there with you? Where are located.
can u fix my BMW FRm2 on my 2008 BMW if i send to u?
Hi
No need to replace the FRM for short circuit protection. Can be reset with tool32!!
My belt broke and after replacing it my lights door locks blinkers dont work can I fix it without replacing FRM??
@@IfYouOnlyKnew_648 same here. Did you find a fix? Did resetting with the tool32 work for you?
You can inhibit short circuit protection on the footwell module with a proper scan tool.
However you should find and repair the short circuit, because after 50 cycles it will block the shorted circuit again.
exactly. No need to replace the module. just fix and check the short circuits on the car and reset counters with tool32. And your FRM is good to go again !