no working those machines as they have to be used this is a rough rocky environment to use these machines any over way would be inefficient or very slow.
this very hard use needs a very short service interval afterwards. bearings and seals must be worn down extremely fast. never seen modern expensive machines this hard in move
I have little to no experience in this. Me too... Hard to watch. No hammer? No explosives? Putting a lot of stress on that dozer blade and arms. None the less... Im jealous.. Wish i was there having that job
Αγαπητοί μου φίλοι αυτά τα βράχια θέλουν την μπουλντόζα σαντουι SD 90,, την κινεζική μπουλντόζα που είναι 116, τόνους και 950αλογγα, να δείτε πως μετακινούν τά βουνά,,,,❤❤❤❤
Too huge and heavy stones, i think here needed more heavy machinery, d475, d11 and large hydraulic excavators, something like liebherr r9200, or use TNT before and use this vehicle
Belle vidéo, machine impressionnantes ou la mécanique et l'hydraulique sont mise à l'épreuve !!! Faut que se soit solide avec de bon chauffeur pas bourrins ! 👍merci Gilles
There must be a reason they don't use explosives! You don't see, what is near this construction site. They are not doing that just for fun. Some environmental or regulatory issue must dictate this procedure.
Small charges and scatter blankets would cover missile hazards. Or deep brissant charges for shattering. Or even an eccentric ripper would be a better choice.
The dude running the big 750 Volvo must have missed the part in school when it comes to leverage he must still think WHATS LEVERAGE AND HOW DO YOU USE IT The guy in the dozer must drink everyday working with that Vovo operator!!!!!
How much deeper did they have to go? That is tough because there isn't enough rock to blast, but just enough of a pain to have to remove them. It is something you just have to take your time on.
Arkadaşlar önce şunu belirtmekte yararvar bir makinenin iyi bir işlev yapası önce kalite ve meteorolojiden geçmesi olmssa olmazdır havasartlari eksi 20 ve 35 derecelerde buaraclar denenir hakeza sıcak yakıcı havalarda çalıştırılır bunun süreçler bir yıl veya 6 ay denemeye tabidir unutmayı bütün araçların denemesi performansı yapılır bu araçlar tekrarında sökülür kalite kontrol ve meteorolojiden incelenir bu makineler belirli testlerden geçmese burada çalıştırmazlar kaporta akşamı hariç aktarma organları geneli sökülür elden geçer geçerli belgeyi verilir sürekli olarak çalışması için naçizane fikrimi beyan ettim gerçekte budur TÜRKİYEDEN SELAMLAR a
Ne kadar acemice bir çalışma bunu paydanda hiç düşünmüyordu millet buna bakınca rezilliği görecek diye . Böyle acele ve acemi bir çalışma görmedim yazık o dozere
I'd be unhappy with the amount of production vs the cost of running those 2 machines, I'd either park the 375 or put it to work on another section, the Volvo needs to spend some time on the bench with a hammer on, there wrecking the equipment for very little m3 per hour.
Depends on the rate they have on it to do it, they might have real good money on it and they could be making a killing on it or it all could be on hourly rates, who would know.
@@rossgray3070 I understand that but even if they are working on an hourly rate someone is paying for all this equipment , if it was me I'd be on their case big style cos there not working correctly there.
@@stevenatkinson3143 That maybe true but they are making progress, thats difficult ground in anyones language, I know I have been a plant operator for over 50 yrs and worked in stuff like that, its a hard slog for sure but I would say they knew what they were in for when they priced the job, thats why they have got big toys on the job.
Господа англоязычные иностранцы, вы не видели как эта техника работает в действительно в тяжелых условиях на Российском Севере. Я почти 40 лет проработал на тяжелых бульдозерах, и поэтому ваши комментарии мне кажутся слишком наивными.
When the money(profit) no object,just for fun. ): May just make an little flat on the top of the hill? I working in quarry,usually 2 days drilling,half day to filling the xplosion into the holes,wiring on,and press the red button,and 30-35 000tons of rock is loose,ready to feeding into the crusher,very little oversize rock left in it,to breaking. What is the reason to doing this way,ayone knows it?
No, even the King of keyboard warriors has not a inkling of why or who the project if for. But sure thinks he knows all else. Wherr you work is being done correctly. These fuck tards are just trying to show off. Or the outfit they are employed by really is as fuckin numb as it appears.Companies with big money that have cash capability to do this . They have big money cause they don't do dumb fuck shit like this. A fool with big money doing this is called a flash in the frying pan. Also as the saying goes A fool and his money are soon parted. And st this point I don't give two shits about any of it I hope they snap the fucking boom stick and fuck it buvket right off that 750.
Seeing this yeah, knowing the cost of it all, sure it set me off. Where is T-roy up top speaking from. Obviously not experience. I noticed his question went unanswered. By the way, I am a nice operator also. So nice I won't hammer equipment new or old.
Obviously by some remarks on here some of us have never been in anything other than a skid loader! Shut the fuck up and go criticize a lawn care outfit ya whiny fucks
@@bladerunner6354 got to agree with you bro. I saw $2.65 mil being abused. A 3" rotary drill and about 1,000-1200 lbs ammonium nitrate with primers caps and det cord would save that equipment from abuse.
These machines can literally move mountains !!
Yes thats true but along with is a price. These two machines in severe duty, wrong . What hourly rate are they getting here for machines ??
Loved this video! AWESOME team work!!!,:-)
Японцы делают вещи
Muy muy bonito tu video saludos desde Oax México 🇲🇽
They know how to work together good job
good work . rock an roll keep it up
Great video Giles maybe a rock breaker was also needed those rocks look hard on the machines. Thanks for sharing buddy 👍👍
Ya know, this sort of thing is why they use explosives. One little boom and Barny comes out way easier. Barny Rubble that is.
Exactly what I was thinking!
By the time this job is finished so will the equipment.
@@samnelsen7658 ST00PID is as ST00PID does.
@@samnelsen7658 A Bit ! Untrue ! That !
I was expecting the Komatsu to roll that boulder right down the hillside and into the Volvo or the sleepy little town.
Working those machines like rented mules.
no working those machines as they have to be used this is a rough rocky environment to use these machines any over way would be inefficient or very slow.
Maybe get a machine with a hammer attachment to finish breaking the larger pieces instead of killing the equipment faster. Work smarter.
Beautiful area to work in. Thanks!
I've never seen a Volvo sweat, but props for not beating the pins out of that 750; however watching that 375 made my back hurt.
In the day they abuse the equipment and in the night the mechanics fix all the bearings and cracks. No warranty on these machines
Wow the best brand of beast is here
What is the best or strongest machine between komatsu hitachi volvo cat ?
i think komatsu
Taught me what to look for in the abused machine list. Just a little fracture hey ( soft explosives)
Powerful and amazing machines
Ive watched these two operators try to dig and rip INTO the hill, try digging AWAY from the hill
So amazing video 😍😍😍😍
Nice video👍👍
Disel power 👍
this very hard use needs a very short service interval afterwards. bearings and seals must be worn down extremely fast. never seen modern expensive machines this hard in move
its all been taken in to account and factored in don't panic.
Mother of God... the wear and tear!
Shouldn't be yankinup ROCKS over his drive sprockets‼️🇺🇸
Nick Spector my thoughts also .The final drive never meant to take that
Sure hope it's a rental. But more than likely headed directly to auction after the job for a "nearly new" machine. Lol.
Matt I hey! Who is that in your picture carrying you? 🤣
Good observation
Looks like they’re first day in those machines
I have little to no experience in this.
Me too... Hard to watch. No hammer? No explosives? Putting a lot of stress on that dozer blade and arms.
None the less... Im jealous.. Wish i was there having that job
Fantastic. Could watch that all day.
there is nothing we can't engineer, we are top of the chain
Камацу красивый и мощный
молодцы.УДАЧИ ВАМ
Αγαπητοί μου φίλοι αυτά τα βράχια θέλουν την μπουλντόζα σαντουι SD 90,, την κινεζική μπουλντόζα που είναι 116, τόνους και 950αλογγα, να δείτε πως μετακινούν τά βουνά,,,,❤❤❤❤
Коматсу D475A-8 справится с этой работой. Он самый лучший.
Fast way to wear out nice equipment.
Community of big machines of big brands
Très belle vidéo
AC/DC - T.N.T. (Live At River Plate, December 2009)
😂😂😂😂😂
Too huge and heavy stones, i think here needed more heavy machinery, d475, d11 and large hydraulic excavators, something like liebherr r9200, or use TNT before and use this vehicle
Belle vidéo, machine impressionnantes ou la mécanique et l'hydraulique sont mise à l'épreuve !!! Faut que se soit solide avec de bon chauffeur pas bourrins ! 👍merci Gilles
What a view from your office window ......those rocks playing hard to get
A lot if dry grinding going on there?
I love Excavator 🇹🇭🇹🇭👍🏻👍🏻
its though work but they are getting the job done.
Blast first then move , waist the machine, but im not paying for it to hard on the machines, my opion
Yeah no shit get a breaker! It’s sad to see rookies beat on nice gear omg
the rocks never stood a chance against those 2 beasts
There must be a reason they don't use explosives! You don't see, what is near this construction site. They are not doing that just for fun. Some environmental or regulatory issue must dictate this procedure.
Small charges and scatter blankets would cover missile hazards. Or deep brissant charges for shattering.
Or even an eccentric ripper would be a better choice.
@@samnelsen7658 or an excavator, like the 750, with a hammer attached to split the larger rocks into smaller ones. But 💣 would be the best way.
What a view! Switzerland, right? I was just there near Basel.
No, France (Valmeinier, Savoie)
@@french_machinery_channel That's by Montpelier, I played there with Ike Turner back in 2004.
@@BillRayDrums صباح الخير
@@BillRayDrums صباح الخير
@@BillRayDrums مرحبا
They are working up with the clouds.
Looks like a job for a dragline.
Would have thought itd be cheaper to blast than risk bustin an Arm
its already been blasted.
@@rogerwoodland2587
Not enough by the looks of it
What do they build up there? ... Very impressiv video! :)
@rats arsed oh okay :) ... thank you for your explanation! :)
what this project ?new road from Paris to Chamounix ?
Nice video
The dude running the big 750 Volvo must have missed the part in school when it comes to leverage he must still think WHATS LEVERAGE AND HOW DO YOU USE IT The guy in the dozer must drink everyday working with that Vovo operator!!!!!
The Dozier operator is pissed off that he ain't running a d9 cat 😄
@@MikeM-ww3so I bet your right I like lots of power as much as the next guy!
Отличная техника!!!Работают не профессионально!!!
Вообще не понятно что они пытаются делать!? Пол часа один камень вдвоем стоят облизывают со всех сторон 🤷🏻♂️
Все во всём мире работают по разному. Не надо никогда никого хаять и обсерать.
Nice ! More more... 👌🍹
So goot 👍
What happened next !?
Just think, a hundred years ago most of that work was done by hand.
Thx Gilles for this amazing vid 🙃😉😂
GOOD JOB
Serviço bruto dois equipamentos top
challenging conditions its what makes it interesting.
Monster💪💪💪
How much deeper did they have to go? That is tough because there isn't enough rock to blast, but just enough of a pain to have to remove them. It is something you just have to take your time on.
Nice pictures. Looks like somewhere in europe. My guess switzerland🤔
France
@@Thegoatt84 صباح الخير
@@Thegoatt84 صباح الخير
@@Thegoatt84 كيف حالك
@@Thegoatt84 فديو جميل ورائع
포크레인 으로 뿌레카 탕땅 몇번치면(중간,중간) 울려서 작업이 쉬운데?
Why didn't they blast the rock, it could have save time and cost I think.
The equipment I think is being misused here.
Arkadaşlar önce şunu belirtmekte yararvar bir makinenin iyi bir işlev yapası önce kalite ve meteorolojiden geçmesi olmssa olmazdır havasartlari eksi 20 ve 35 derecelerde buaraclar denenir hakeza sıcak yakıcı havalarda çalıştırılır bunun süreçler bir yıl veya 6 ay denemeye tabidir unutmayı bütün araçların denemesi performansı yapılır bu araçlar tekrarında sökülür kalite kontrol ve meteorolojiden incelenir bu makineler belirli testlerden geçmese burada çalıştırmazlar kaporta akşamı hariç aktarma organları geneli sökülür elden geçer geçerli belgeyi verilir sürekli olarak çalışması için naçizane fikrimi beyan ettim gerçekte budur TÜRKİYEDEN SELAMLAR
a
Ne kadar acemice bir çalışma bunu paydanda hiç düşünmüyordu millet buna bakınca rezilliği görecek diye . Böyle acele ve acemi bir çalışma görmedim yazık o dozere
I'd be unhappy with the amount of production vs the cost of running those 2 machines, I'd either park the 375 or put it to work on another section, the Volvo needs to spend some time on the bench with a hammer on, there wrecking the equipment for very little m3 per hour.
Is not that they do this every single day for a whole year.
Depends on the rate they have on it to do it, they might have real good money on it and they could be making a killing on it or it all could be on hourly rates, who would know.
@@rossgray3070 I understand that but even if they are working on an hourly rate someone is paying for all this equipment , if it was me I'd be on their case big style cos there not working correctly there.
@@stevenatkinson3143 That maybe true but they are making progress, thats difficult ground in anyones language, I know I have been a plant operator for over 50 yrs and worked in stuff like that, its a hard slog for sure but I would say they knew what they were in for when they priced the job, thats why they have got big toys on the job.
@@stevenatkinson3143 I'd guess the people who own the machines paid for them with a grant or subsidy from the eu empire, easy come easy go
Господа англоязычные иностранцы, вы не видели как эта техника работает в действительно в тяжелых условиях на Российском Севере. Я почти 40 лет проработал на тяжелых бульдозерах, и поэтому ваши комментарии мне кажутся слишком наивными.
А здесь на видео что, условия не тяжёлые, и плюс высокогорье.
I would sure as heck hate to be at the bottom of the mountain sight seeing
That lad is rough on the dozer.
Needs Bigger tackle by the looks of it but doing ok until something goes Peetong
J’ai mal pour le bul 😩
I guess a breaker would slow down production on ledge??or process only
Nice bro
This job is very exhausting
That Komatsu is going to be junk by the time that job is finished.
That creaking sound ?
That's metal straining on metal
🙄
in certain circumstances oil and grease can't be used because oil and dirt becomes a grinding paste and makes the problem worse.
@@rogerwoodland2587
What Circumstances ?
This folks is why you don't buy auction machinery.
What are you Doing ! With the Rocks !?? Once there out Of the Mountain !?? Then !
When the money(profit) no object,just for fun. ):
May just make an little flat on the top of the hill?
I working in quarry,usually 2 days drilling,half day to filling the xplosion into the holes,wiring on,and press the red button,and 30-35 000tons of rock is loose,ready to feeding into the crusher,very little oversize rock left in it,to breaking.
What is the reason to doing this way,ayone knows it?
No, even the King of keyboard warriors has not a inkling of why or who the project if for. But sure thinks he knows all else. Wherr you work is being done correctly. These fuck tards are just trying to show off. Or the outfit they are employed by really is as fuckin numb as it appears.Companies with big money that have cash capability to do this . They have big money cause they don't do dumb fuck shit like this. A fool with big money doing this is called a flash in the frying pan. Also as the saying goes A fool and his money are soon parted.
And st this point I don't give two shits about any of it
I hope they snap the fucking boom stick and fuck it buvket right off that 750.
Blade Runner what do you run? A skid steere?
@@donnebes9421 I operate anything but crane.
@@donnebes9421 Only on Sundays
there has to be a better way ...these machines gone age really quick on this job
the cost is already been factored in. don't worry.
@@rogerwoodland2587 you the one thats got to worry all my contractors do this smarter
Big machine and Big rocks
What are they building up there ? Great view too .
ski slope/ resort I think that's what I saw
Why the f....aren´t they using impact ripper or breaker on the Volvo?
Where is the hammer ffs.....talk about wasting time and diesel
I saw the hammer in the background. Sure would make things easier I think.
I can't help thinking that the driver of the Komatsu isn't the owner. This is hard to watch.
never seen a machine cry like that....crazy
Agree jonka1 I don,'t gett it.
He will pull off a corner tip...
Preparing a ski slope? Need heavier machines :-)
فديو ممتع 👍❤️❤️❤️❤️👍👍👍👍👍💋
if I had to do it, I'd go crazy
So....you've done it?
amajing super kuat👍
Why the fuck was he trying to pull that rock up like that haha jesus christ that's funny shit I could have done that in about half the time
What a balls up!
Без взрывных работ тяжело идет работа
😓👌
Зачем взрывать когда техника мощная и справляется.
Nice equipment and operators - the keyboard warriors have no clue what they're talking about. What project is this for?
Blade Runner wow! Blade runner triggers easy.
@@donnebes9421 lmmfbo!!
Seeing this yeah, knowing the cost of it all, sure it set me off. Where is T-roy up top speaking from. Obviously not experience. I noticed his question went unanswered.
By the way, I am a nice operator also. So nice I won't hammer equipment new or old.
Obviously by some remarks on here some of us have never been in anything other than a skid loader! Shut the fuck up and go criticize a lawn care outfit ya whiny fucks
@@bladerunner6354 got to agree with you bro. I saw $2.65 mil being abused. A 3" rotary drill and about 1,000-1200 lbs ammonium nitrate with primers caps and det cord would save that equipment from abuse.
This does not look fun at all , need a impact ripper on the 750 !
We have impact rippers on 385s they would bust that shit easy.That Dozer can't push solid rock gonna bust a trunnion or axle..
Impact ripper on a 385 would blow that shit out...
Oh look there’s a breaker in the background
So Volvo are doing orange safety rails on their diggers as well as dumpers, look a bit strange.
Sometimes I wonder if an operator uses common sense when ripping out ledge.. I definitely would love another a chance in life to be ripping out ledge.
I'm sure they know what they are doing, no need to lecture them on production vs costs.
Thank you Crinosis, an intelligent comment...
Lightly used machine for sale. Only 1,000 hours. Like NEW!
A new boot on the Volvo might help...