The Ultimate 6x47 Precision Rifle Build A-Z: Woox Furiosa Ultra & BAT Hammerhead
Вставка
- Опубліковано 26 вер 2024
- Full Story: ultimatereload...
UR on RUMBLE: rumble.com/ult...
UR on Patreon: / ultimatereloader
I’ve built a lot of rifles over the years but this is one I think will make my favorite’s list: 6mm x 47 Lapua in a WOOX Furiosa Ultra chassis around BAT Machine’s brand-new Hammerhead action! In this video I'll take you through the build materials, machining, assembly, and break in. Plus, we'll take this rifle out for some long range shooting. This is going to be epic!
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Disclaimer:
You alone are responsible for the safety of yourself and your property.
Check local and state laws before undertaking any activity involving possessing, transporting, and shooting firearms. Check local and state laws before attempting to load ammunition or perform any modifications to a firearm. Always abide by the law. Always practice gun safety.
The content on this channel (including videos, ammunition reloading data, technical data, comments, and any other information contained within) is for demonstration purposes only.
Do not attempt any of the processes or procedures shown or described in this video or on this UA-cam channel (gavintoobe).
Any reloading data supplied on this UA-cam channel (gavintoobe) or in this video, including any comments from viewers and readers must be assumed to be in error.
Always consult at least three sources of manufacturer's ammunition reloading data before reloading your own ammunition.
Do not attempt to repair or modify any firearms based on information found on this UA-cam channel or in this video.
Gunsmithing procedures should only be performed only by a licensed gunsmith.
Ultimate Reloader, LLC can not be held liable for any harm caused to any individual or any personal property related to activities, procedures, techniques, or practices described in whole or part on this UA-cam channel (gavintoobe) or in this video.
By watching this video in whole or in part, you agree that you alone are solely responsible for your own safety and property as it pertains to activities, procedures, techniques, or practices described in whole or part on this UA-cam channel (gavintoobe) or in this video.
-------------------------------------------
Ultimate Reloader LLC / gavintoobe Material Connection Notice:
The following Ultimate Reloader partners are featured in this video:
- Woox
- BAT Machine
- Berger Bullets
- Caldwell
- Colorado School of Trades
- OTM Tactical
- Hawkins Precision
- Hodgdon
- Hornady
- Precision Matthews
- DM Targets
- Short Action Customs
- Triebel
Ultimate Reloader partnerships involve one or more of the following:
Product supplied for evaluation + testing + features in videos/articles, paid advertising and promotions, engineering and product development services, scientific testing and evaluation, external media production and related marketing services.
Ultimate Reloader LLC is committed to publishing subjective and data-driven information+insights related to products whether it be favorable or unfavorable or both.
For more information about Ultimate Reloader partnerships, please visit: ultimatereload...
ULTIMATERELOADER10 saves you 10% at wooxstore.com ! Don't forget to use this code!
I have a 6X47 HOT ( no turn neck ). Not fussy to load for, shoots really well. My favourite roo rifle. 👍👍👍
I like watching videos on UA-cam. I am amazed at the skill in modifying rifles
It’s so cool to see how far you and the channel has come over the years. Congratulations!
Omg! I was so excited! I thought it was the OG 6x47...😢 6x47 rem mag is 🤴 👑
That rifle was odd looking at first glance, however, the pics in the sunshine changed my mind instantly. WOW that thing is gorgeous the more you look at it, I don’t know anything about that caliber but if you’re hitting out at 1300+, I’m impressed, although all you craftsmanship and skills are top notch, and rifles are all equally beautiful.
I bought a WOOX Furiosa and I really like everything about it except the way the fore end attaches. You cannot tighten it enough to take the wiggle out, it is quite annoying. It needs to be shimmed, epoxy bedded or aluminum welded to remove the wiggle. It’s currently shimmed but I think I’ll try epoxy. They never should have made it of two pieces.
in the Ultra they fixed this by adding a third screw that attach the arca to the mono. my it's super solid
I have a Woox Ultra and I have not this problem. It is one of the best chassis I ever had: It is solid, well done and accurate.
@@JackMcPherson-vq9zgI didn’t buy the ultra, looks like they solved the problem in the upgrade. I’ll just epoxy it together.
Now all you need is a 25x47 to have a full set
Yes, I was thinking about that!
@@Ultimatereloader Have you ever tried the 6xc?
Couldn’t agree more!
@@stevejones683 I have a 6 XC necked down to 22.
Cool. Up next an old action, old caliber, blued barrel, wood stock?
Hah if only
Working on it! I have a couple Dumolin Mauser actions
@@Ultimatereloadercool!! Classic is cool sometimes as well :)
I have a 6mm-284 wearing a Pac-Nor 1-7 twist 28" barrel. Yes it is a barrel burner and it gets hot really quick. When I need to rebarrel, I will be looking at a faster twist and longer barrel and have this one cut down for either my 6mm JDJ#2 or my 6mm TCU. My 6-284 rifle likes H4831, IMR 4350, Varget, and RL-22 which it shoots the best with 105 hybrids.
Awesome man !! So cool!!
I love watching ultimate rifle builder.
Whatever you want to call it, I’m glad you’re here!
I was always impressed how well my groups always were when fire-forming the brass.
As long as you don't push the shoulder back 0.013" too far 😂
Would have been cool seeing it as an original 6x47 based of 222 mag.
Love the look, I need one.
:) Looks even better in real life!
Nice build Gavin, and a cool caliber, I'm glad you resisted the temptation to ceracote the barrel. Ceracote looks good and helps hide a shiny hunting barrel, but it'll slow a barrel from cooling down by trapping heat and hence affect accuracy IMO 😮
Very nice looking rifle ❤
would love to see you do the texas plinking 1MOA challange
Love the whole build ,great components you acquired.Nice stock first time I have seen them . Gavin when you get your dies I think you may really like how N-150 works
I build a big horn origin in a Furiosa Foreend / Exactus buttstock hybrid stock.
Jeez is that a gorgeous setup.
Cool rifle Gavin!
great looking rifle Gavin ...
Thank you!
N160 with 105 gr hybrids was my second choice behind H4350 when I had my 6x47 Lapua.
Nice build lads love the hammerhead action. I've got a 22x47 lapua and have been thinking about a 6x47 as well
Very nice 👌 👍
That is a beauitful rifle
Hey Woox, make left handed stuff, would ya?
Why using a Timney instead a TriggerTech? A diamond would make the build perfect 👍🏻
Normally I'm a bit more of a traditional European rifle kinda guy. This on the other hand is on point with the juxtaposition between the walnut and the metal. The barrel finish definitely compliments it. I'd pay good good money for a setup like that.
Love my 6x47L. I don't think it's picky at all to load for. Varget, CCI 450 and 109 Berger LRHT.
Gavin, you really need to check out Tuebor Precison for actions. Other than they are marines, their action are super smooth.
Those actions look interesting!
@Ultimatereloader o got a half off certificate at a guardian match, so that's what I built my 6gt bolt gun on. Going to get another one for 7prc
Will you do a review and segment on the EC tuner brake please? I just bought one and want your thoughts and learn more about it. Thank you sir great channel
Why not 6CM? Beautiful build. I’m actually looking the Bartlein barrels in 6mm or 6.5mm and trying to choose a caliber. So many options! I can get 6x47 Wilson Dies so maybe this would be a good option! Greetings from South Africa!
Sweet rig
That’s one of the most beautiful rifles I have ever seen wow amazing great job can I BUY IT ?
Amazing to have a very accurate load so quickly, this combination really shows a lot of promise. Please permit me 1 question, why do you cut so much of the barrel thickness off , to fit a brake ???
Gavin, cover your lathe ways when your finishing your barrels between centers...dang dont get that abrasive residue on 'em.
Yes- good call!, I had to do a thorough cleaning before moving anything, typically I put down blue paper towels over the ways/saddle.
Woox is made in my home town of hickory NC
Doesn't to 6x47 and 6gt just about match each? Just the 6gt higher pressures? I went the 6gt route after moving up from yhe valkyrie and won't be changing anytime soon. Just curious
Yes, I've decided 6GT has enough powder to do what I need and no more. I decide on a bullet, velocity and work backwards to the cartridge now.
In an apocalypse scenarioa good gunsmith will be valuable, probably equal or even more valuable than a surgeon
Okay Gavin you are building now to the 1 percenters. These builds most of us can't even afford to dream about. Time to start pulling from the bottom shelf and show us some good builds that we can afford😊
Please see my two recent Savage axis projects- 223 Rem and 7mm-08!
So awesome!!
Thank you!
What do you think of this action? Been thinking of it myself. I’m looking for the smoothest action with really light bolt lift
Have you ever done Huber Concepts Rem 700 trigger?
What is the finished weight of the rifle, with the double pull Ckye Pod?
I’m interested in a similar setup for NRL Hunter. But, I need to stay under 16 pounds and that looks like it may be over
Pritty bad ass rifle😎🙏🏻😎🙏🏻
Very nice from the uk can I have one in 6.5 creed I wish looking for more content with this rifle
Absolutely not the ultimate prs build in any regard
Very nice looking rifle. When you was shooting prone what is the pole with the thing on top of the pole to your front right?
Lloks like a piece of rebar with a safety protector on it.
It's a T-Post with a protector- we used it to shoot PRS style off of, I just pulled it out of the ground, distracting in videos/photos :)
@@Ultimatereloader oh, ok was just wondering if it had a special purpose being there is all. I have a few T-poles without the special protection on top. :)
I need one
Awsome build really like the 6x47L it is definitely one for my dream list. Do you know what the velocity was for the load you were shooting in this video
2800 fps, but there was room left!
I love this but the bolt is on the wrong side 😢
Beautiful job.
Have you compared Nightforce optics with Leupold? I use both and find the former much, much brighter optics.
Edit:
I believe the tank-trap is called a ‘hedgehog.’
I have not yet compared those optics!
Distances?
It is a pretty stock.
Yes! Amazing when the sun hits it!
God's caliber.
👍✌️‼️
how's the feel of the hammerhead compared to the zeus?
Very good!
Want to sell it 😎
What happened to your machining channel ?
Kinda just joined the two together
Yep
Gavin, you do an excellent job I think on all your builds. But this rifle here is definitely tits af, I see it as a LR yote killing stick.
Yeah they are drunk. 1500 bucks just for a stock?? Twice the price of the rifle I’d put in it lol. Anti Bidenomics discount needs to be around 50% for my class of blue collar oil workers to afford. 6 years ago we would have bought one for every rifle. Now we are damn near on welfare lol. Seems only UA-camrs can afford these products they endorse. I never see any of this stuff and I shoot a lot of matches all over.
I shoot matches all over and I’ve literally seen them all… it’s not uncommon to see multiple $9,000 finished rifles
If you're truck isn't paid off, you have no reason to complain. Plenty of people riding around in $60k trucks complaining they can't afford nice stuff.
@@ZachHunts 2017 Ram. Paid off and dues paid. Bust our asses in the oil fields daily so you can fill up. Your welcome
Potato 🥔
That's cool that you have one of the thousands of important jobs in America. Most guys I know who do/ did work in the fields of oil put whatever they wanted on their rifles without a care to the cost.
All you target rifle shooters...your rifle looks unfinished with a bare barrel.🤷♂️
Looks like a cool setup.
I really like it