Wow! A beautiful job on the Hetzer Lukasz! You never disappoint my friend, and this video shows us why. Your explanations of how and why you add each element to the building, painting, and weathering of your models, is extremely helpful to any armour modeller, and I have learnt a lot from watching you work. Thanks so much for sharing both your techniques, and your skill with us. Looking forward to your next project. Greetings from Australia 🇦🇺!
That was a absolutely outstanding job on this little monster,as others have said, thst camo scheme without brudh matks is outstanding, I have said before, you are one of the true masters of this great hobby, best regsrds from Australia
Great work, as always. I like your point about the wire thickness. I've seen too many models in 1/35 with either wire or tie-down rope that is obviously out of scale. Modelers must compare the wire or thread they use to the fingers on the figures' hands. Even rope would be the same or smaller in diameter...
Hello mr.cold. nice job done as allways.thank you very much for sharing. And keep the Faith.it is possible i have seen this before.it looks trusted.keep going mr.cold. with sticky greetings and best regards from brandenburg.your modellmate and friend in sprues.christian
Yes mate, this is full build of episodes I published some time ago. But as I check statistics it works very good and people want to watch all at once :)
really impressive my dude, should get a shot from the perspective of the camera man in the diorama, would be neat to have that perspective alongside the diorama.
You can use baking soda as CA filler. It dries hard. People use this combination to repair guitar nut slots that are too low. It dries hard enough to withstand guitar string tension pressing down on it. Just FYI.
Beautiful work, I hate modeling, so many pieces that disappear and the swear words come flying. Yet I can get obsessed for hours working on some small detail, only to lose it once it is finished and I'm about to glue it down....
I ironically just received the non interior version if this kit in the mail today. Scooped it up for $18 from an online retailer. Hard to pass up at that price.
Another repeat. You won't be concerned as I'm only one, but unsubscribed and cancel Patreon. Sorry but I'd rather no video than have the option to watch videos I've previously seen.
![Camouflaged JAGDPANZER IV/70 (V) LANG - Part 2 - 1/35 TAMIYA - [ Painting - weathering ]](/img/n.gif)
Lucas you truly are the best in my opinion. Cheers from the States. 🇺🇸
Many thx my friend! :)
Wow! A beautiful job on the Hetzer Lukasz! You never disappoint my friend, and this video shows us why. Your explanations of how and why you add each element to the building, painting, and weathering of your models, is extremely helpful to any armour modeller, and I have learnt a lot from watching you work. Thanks so much for sharing both your techniques, and your skill with us. Looking forward to your next project. Greetings from Australia 🇦🇺!
Thx a lot mate for your comment!! :)
The exhaust appeared later and finally ended my anxiety .
Lovely model and paint !
Thank you very much! :)
Wunderschöne Arbeit die, mich auf sehr viele Ideen gebracht hat.
Danke schon! :)
Another great build.Keep the videos coming it really inspires
Thank you very much buddy! :)
Mate: how in God’s green Earth can you brush paint camo and not leave visible brush strokes? Man that’s a fine job
The key is good dilutiona and 2 or even 3 thin coats. :)
This is outstanding work. Your attention to detail is what really makes this unique.
Thank you very much buddy! :)
Great looking vehicle...keep them coming...PLEASE!! =)
Thank you very much buddy! :)
Brilliant work! Happy to be a patreon member.
Many thanks my friend! :)
Outstanding - As usual! Fabulous work!
Thank you very much buddy! :)
Just bingeing your videos - such great technique and builds! Love the detail and learning new tricks and tools.
Thank you very much buddy! :)
wow start to finish! You brought my mojo up!
Thank you very much buddy! :)
That was a absolutely outstanding job on this little monster,as others have said, thst camo scheme without brudh matks is outstanding, I have said before, you are one of the true masters of this great hobby, best regsrds from Australia
Many, many thx mate! Im really happy you wrote such kind words :)
I really like the way you progress on the model. The weathering is soo nice... fabouless build..
Thank you very much buddy! :)
excellent little vignette !
Thank you very much buddy! :)
Another fantastic build 👏
Thank you very much buddy! :)
Fantastic build, looks awesome
Thank you very much! :)
Excellent work, a piece of art!
Greetings from Germany!
Thank you very much buddy! :)
Awesome build my friend keep up the good work 👍👍👍
Thank you very much buddy! :)
Great little build my friend. 😀
Thank you very much! :)
Great work, as always. I like your point about the wire thickness. I've seen too many models in 1/35 with either wire or tie-down rope that is obviously out of scale. Modelers must compare the wire or thread they use to the fingers on the figures' hands. Even rope would be the same or smaller in diameter...
Thx a lot mate for your comment!! :)
You always do a wonderful job!
Thx a lot mate! :)
Awesome paint job
Thx a lot mate! :)
Great Work as Always!
Many thanks! :)
Perfect work 👍👍👍
Thank you very much! :)
Looks very good to me.
Thank you very much buddy! :)
Out of words! 🤩
Thx a lot mate! :)
absolutely brilliant..!!!
Thank you very much! :)
Nice Hetzer and crew.
Thx a lot mate! :)
GREAT JOB, I BUILT ONE 20 YEARS AGO, I THINK I'LL REDO IT SOME. JESUS LOVES YOU ❤❤❤
Many thx mate! :)
Keep it up brother, great work
Thank you very much buddy! :)
Good model and good work 💯
Thank you very much buddy! :)
Hello mr.cold. nice job done as allways.thank you very much for sharing. And keep the Faith.it is possible i have seen this before.it looks trusted.keep going mr.cold. with sticky greetings and best regards from brandenburg.your modellmate and friend in sprues.christian
Yes mate, this is full build of episodes I published some time ago. But as I check statistics it works very good and people want to watch all at once :)
Thanks! 😀
Dzieki frend! :)
super model, chociaz pewnie drogo wyszlo z akcesoriami. w kolekcji chyba jeszcze brakuje k2 black panther z academy
Czy drogo? Nie zastanawiam się nad tym - model ma wyglądać fajnie. A K2 owszem - lezy i czeka. Może w 2024 będzie czas żeby ją zbudować. :)
Looks Gooood !!
Thank you very much! :)
really impressive my dude, should get a shot from the perspective of the camera man in the diorama, would be neat to have that perspective alongside the diorama.
Yep. I forgot abot this perspective :)
Sensationell ⭐️⭐️⭐️⭐️⭐️
Thank you very much! :)
So cool 👍
Thx a lot mate! :)
nice job 👍
Thank you very much buddy! :)
You can use baking soda as CA filler. It dries hard. People use this combination to repair guitar nut slots that are too low. It dries hard enough to withstand guitar string tension pressing down on it.
Just FYI.
Yep, I know about soda. But having ready made product I just use it! ::)
i would refer that degree of detailing as "ultra detailed" ; )
Thank you very much! :)
Beautiful work, I hate modeling, so many pieces that disappear and the swear words come flying.
Yet I can get obsessed for hours working on some small detail, only to lose it once it is finished and I'm about to glue it down....
Looking at your comment, thank you even more for writing :)
Well done! Did you do a video on the groundwork/figures?
Please take a look at the single episodes. You should find something about groundwork :)
I ironically just received the non interior version if this kit in the mail today. Scooped it up for $18 from an online retailer. Hard to pass up at that price.
Good price for this kit! :)
Did you apply another matt coat at the very end after using the pigments and oils to seal it? Grüße
No, I try to not use varnishes at pigments and any weathering effects :)
Panie Łukaszu jest szansa żeby zrobił Pan model z artyleria? Np Sdkfz 251 + Pak 40?
Na chwilę obecną nie mam w planie nic takiego ale na Patreonie pokazywałem swego czasu prace nad m107 z Wietnamu. :) Zapraszam!
nice video I wanted to know the brand of glue you use in this video thanks
I used VMS glue. And AK Interactive.
Did I see this one in the Military Scale modelling magazine in the UK??? :-)
Yep. There was an article in Military Modelcraft International copuple weeks ago! :)
Good job, I bought that issue in the UK and it looked the best out of all the works presented there!@@coldemonspl
@@GrzegorzBrzeczyszczykiewicz123 thx :)
Witam, chciałbym zapytać jaki rylec do powiększania linii podziału stosować w poj. pancernych w skali 1/35. pozdrawiam
Ja używam OLFA PC-S :)
GREAT JOB! How do you get the tow cables to bend like that without breaking?
They are copper wire - check Eureka XXL offer :)
Would you say this one is better than Tamiya?
For me the same. :)
Pierwszy 🎉
Jak zwykle :)
The tracks do not look heavy enough.
It;s your opinion. For me they are OK.
Enjoy your work but, seriously, it might be wise to stop headlining your builds using the term ‘ultimate’ as if it can’t get any better…
Thank you very much! :)
Another repeat. You won't be concerned as I'm only one, but unsubscribed and cancel Patreon. Sorry but I'd rather no video than have the option to watch videos I've previously seen.
Your choice.
Even in my best day I couldn't come close to what you do
Thank you very much buddy! :)