Packed Tower vs Tray Tower | Chemical Engineering interview question answered | Hindi
Вставка
- Опубліковано 16 вер 2024
- This video compare packed column with tray column and explain Why and when packed column is used instead of tray column. This is answer of one of the frequently asked distillation column interview question. This video is useful for GATE Chemical Engineering as well as Chemical Engineering interview.
Column tray pressure drop in Hindi
• Column tray pressure d...
Part 1 - Tray Pressure drop and Weeping in Distillation Column
• Part 1 - Tray Pressure...
Part 2 - Flooding in distillation Column: Entrainment or Jet Flooding and Flooding velocity
• Part 2 - Flooding in d...
Part 3 - Flooding in distillation Column: Downcomer Backup flooding and downcomer choke flooding
• Part 3 - Flooding in d...
Part 4 - Dumping, Stability diagram, turndown ratio & Mechanical problems leads to flooding/Dumping
• Part 4 - Dumping, Stab...
Part 5 - Why Vacuum column diameter is larger than Atmospheric Column?
• Part 5 - Why Vacuum co...
Topics Covered
type of packing in packed tower
channeling
loading
floading
chemical engineering
packed tower vs tray tower
packed tower absorption
flooding in distillation column
packed vs tray column
packed vs tray column | Mass Transfer
Comparison of plate and packed column
Packed distillation column
Distillation column interview questions
Distillation operating problem
Distillation column internals
Distillation column interview question and answers
Type of packing
Tray vs packed tower
Tray vs packing
Packed Towers: better than trays?
packed tower mass transfer
packed tower and tray tower
packed tower working
packed tower design
packed tower sizing
Distillation column interview question and answers
Vacuum distillation Unit
Distillation process
types of distillation
Mccabe Thiele method distillation
Mass transfer Chemical Engineering
Distillation process in Hindi
Pump around zone is mainly used for heat removal. Since we do not rely on pumparounds to fractionate - but just to remove heat - good vapor- liquid distribution is not critical. On the other hand, Liquid flows in the pump around section are greater than in other section. That's why there may be flooding in pump around section. For these reason a bed of 4 or 5 ft of structured packing is often, then an excellent selection for the pumparound section of tower. The capacity of such a bed potentially has a 30 to 40 percent advantages over trays.
Having said this, I have seen many pump around zone which uses tray instead of packing.
Ok sir thank you
Good to see you with your lectures. Good work Sandeep. Your lectures are of worth even for teachers and non-academicians with Chemical engineering background.
@@saniruddhaan Thank You Sir ! Where are you ?
One of the best videos out there to understand why a column has trays and packings. 🎉🎉
Majaa aa gaya
Especially shut down drawbacks of packed column
one of the most informative video.
please a lecture about absorption and adsorption topics mostly used in refinery.
Tyank🎉you sir.proud of youu,
All concepts clear
sir i read by treybal but i didnt got there but now i can even understand every line of that page...thnx
Excellent 👌 and very informative video.
Plz make a video on circulating, external and internal refulx.
Aj tu ap ny sir bhry mood mai vdio bnyi.kapi khush ty haha MashAllah.. good vdioe.. make a vdio on MTT mood ..furnace mood .. and other different moodes of distillation operation. Start up procedures.. control etc
Please sir make video on reflux. Ratio and its application
you have explaine very easy and understandable. thanx for that
Thank You Sir very widely covered video and very well compiled also
Tbbe n niche jayega ji 😅😂 maja aa gya gurudev🙏🙏
Really it was amazing and funny.😂nice explanation
Sir I drew the graph of McCabe thiele method and the point of intersection of the stripping, rectifying and feed lines is coming between the 5th and 6th tray. So accordingly I should place the feed inlet between 5th and 6th tray. My question is if I place the inlet somewhere else what will happen?
Your explanation is very nice ❤
In packed coulmn!! Agar liquid flowrate inlet mein two side banching kardi jaaye! And on the packing 50% 50% horizontally liquid distribute kardiya jaye toh proboem solve ho jayegi channelling ki??
Tray tower be like :- haar ke jitne wale ko bazigar kehte hai 🤣🤣😂😂
Packed Tower be like: "kia karu main? apna Job chorh du?"😂
Air separation distillation column design parameters par video banaiye
Please make video on how reflux is added and what are the effects of total reflux minimum reflux and optimum reflux on trays and column overall
Nice explanation 😊😊😊😊
Sir is that true that in flash zone we are increasing the surface area which ultimately gives rise to a higher rate of evaporation....?
2nd in some books I have seen that there are usage of prv valve for feet in cot line before entering the coloumn why this is not used in modern refineries?
End of the story : Tray tower zindabaad 😂. Very well explained sir thank you so much 🙏🏻
Petlyuk distillation column ke bhare me bayaiye. Hamare plant me ye use kiya hai
Sir agar feed mera saturated liquid ho to feeding rectifying ya stripping kis m karenge
Sir please make video on pump seals. Mechanical seal. Pressurized seal. Gland Packings etc from industrial view point
Sir if we reduce the diameter of impeller then what happened with flow and head of pump? Please answer 😊
Sir, Kindly make video series on pumps with complete details like capacity..important selection parameters and its calculations...hydraulics etc..etc..
I have already made many videos on pumps. Check it out first.
Sir what is vapour horn in vacuum distillation column??
Hi..can you a video on how absorption endothermic or exothermic with its chemistry..
Can u explain why we are using intercoolers in absorber if absorption is endothermic??
Sir ek video pump, blower and compressor pr bnao
Which has more pressure drop, random packing or regular packing and why? Can you please elaborate something, because I'm very confused in that...
Random Packing has more pressure than Structured/Regular Packing because the flow path in structured packing is defined and structured unlike random Packing
Make a video pfr reactor
In Haldia refinery i think tray tower used in VDU-I as i read in manual there is 22 trays in column....why not packed bed inspite it is vaccum column or am i wrong?
In stripping section there would be tray which is below the Feed inlet.
Sir, make vedio on pre-startup activities or commissioning activities in refineries
Sir please make video on effects of reflux ratio on distillation column aur feed ke bare me kuch sir different types of feed hote hai unka value kaise less than one hota hai ya greater than one etc please
Thank u so much sir
2:03 open area ,wetted area
Thank you sir
Thanks sir for explaining this topic
Which types of packing used in Atmospheric tower, vacuum tower, Absorption tower.
Kindly discuss about HETP calculation
Sir azeotropic and extractive distillation pe video bnaiye
Make video on tha basis of use .kon sa distillation kaha used karege or advantages or disadvantage.
I have explained these in this video. Where packed bed will be used and where tray tower will be used.
Very Well Explained👍💐💐
Sir Distillation Column Mein Top Ka Temperature Kaise maintain karte Hai And Reflux And Reflux Ratio ka Role and reflux Increase and Decrease karne par Plate pe Kya effect Hota hai
VDU me packing used hota he
To fir VDU ka diameter hive hota he?
Mcbae thile method pe vidio banao sir please, it is very easy for you (gate no 1) but it is difficult for us so please sir,
Very nicely done.
Sir please make videos on turbines.
Sir make a video on HTU and NTU
Sir pani kyu supply karte hai vapour ke saath contact me aane ke liye? Aapne bataya mass transfer krne ke liye, lekin ye samujh me nahi aaraha hai, thoda practically bataye jaise paani nahi supply karenge to kya hoga
One video on this topic "How pressure drop is different in different types of trays "
Only sieve tray is covered in previous videos
For further details about Packed vs Tray
ua-cam.com/video/GH9WQTTegGE/v-deo.html
sir bhut interesting way me aap explain kr dete hain....😂😂😂
Thanks !
why do we use baffles in column?
Nice explanation sir
Nice use full
Superb sir 🙏🙏
Sir please make vedio on, how to study p&ID diagram, earlier vedio don't have sufficient information.
Kindly tell by live example.
And alos tell how me select hydrotest limits of Piping / flow line during hydrotest.
Earlier vedio on how to study P&ID don't have sufficient information.
That I can't do that. P&ID are confidential and I can not discuss on UA-cam. In P&ID videos I have explained enough such that anyone can read P&ID by himself.
Sir if you can't make vedio with live example on P&ID, please make a detailed vedio on how to read P&ID, your earlier vedio don't have enough information in P&ID.
@@chandershekhar2192 Whatever I could share...I already shared and I believe anyone who have gone through those 3 videos will easily read p&id if He has knowledge of process. Sharing more than that may risk my job. Please understand !
macabe thiele prr video banao
Tray tower be like: जलवा है हमारा 😂😂😂
Maine bhi dubara dekha…😁😁😁
Thank you Sir 🙏.
Amazing 😄🤩🤩
much needed...
Great sir
Sir please ek video LHSV pr banaiye...
Platforming me kis type ka reactor use hota hai..
Apne Heater ka Part - II aj upload karne wala tha.. Nehi kiya..!!
Arrey yaar....aaj mera internet speed hi bahut slow ho gaya hai....2 hrs se upload ho raha hai....abhi tak 60% hi upload hua hai....ab to mai sone jaa raha hu...beech me neend khulega to public kar dunga....nahi to kal sabere tak ho jaayega....
bhaiya why we use packed tower for absorption and tray tower for distillation ?
Its not always true...I have seen many absorption tower which is tray tower.
@@SandeepAcademy9 ok bhaiya
Please sir Need this concept
Sir , in haldia refinery Distillation column to tray column use hota hai... fir bhi sir apna kyu bola packed bed use hota hai ??
Maine kab kaha?....maine to yahi kaha ki most of the column tray column hai....VDU me packed bed hai....pump around zone me kahi kahi packed bed hota hai....kahi kahi tray hota hai....
@@SandeepAcademy9 thank you sir... 😊 Sir pump around ke pass packed bed kyu use hota hai... apne jab pump around explain kiya tha to tray use kaarke explain kiya.... 🤔.
@@rohanbardhan497 aap fir se video dekhiye...maine explain kiya h.....pump around zone is mainly used for heat removal. Since we do not rely on pumparounds to fractionate - but just to remove heat - good vapor- liquid distribution is not critical. On the other hand, Liquid flows in the pump around section are greater than in other section. That's why there may be flooding in pump around section. For these reason a bed of 4 or 5 ft of structured packing is often, then an excellent selection for the pumparound section of tower. The capacity of such a bed potentially has a 30 to 40 percent advantages over trays.
Having said this, I have seen many pump around zone which uses tray instead of packing.
@@SandeepAcademy9 Samaj gya sir...that means packed bed is sometimes used to provide liquid holdup to achieve the proper vapor-liquid mass transfer and heat recovery and to avoid flooding.....
Make vedio on heat exchanger & U stamp pressure Vessel inspection requirements as per ASME sec Viii Div II & DIV I and TEMA
I do not have much knowledge on ASME codes
Pump around ko kyo ham mainly return krte hai
Pump around ka main kam heat ko remove karna hota . As used pump around reflux.
17:57 the true bihari.
L/G ratio ?
Sir MNI full form
M&I sorry for my pronunciation. Plant ko each 3-4 saal me band karke uska maintenance and inspection karte hai. M&I means maintenance and inspection.
Sir, column me bottom me ejector q nhi lagate h
Fir to vapor bottom me jaane lagega...top me kyo jaayega ?
Ok sir
13 min tak packed tower ki badai sunane ke baad tray tower be like chhota admi gundai karta hai to karne do
1st view
Not understand
Why can't u explain in english
For further details about Packed vs Tray
ua-cam.com/video/GH9WQTTegGE/v-deo.html
Sir ek video pump, blower and compressor pr bnao
Sir bubble column reactor pe v ek video de dijea please
Sir, please make detail vedio on different of trays in coulmns and coulmn internals including TSR rings.
Brother i think you are more knowledgeable than me. I do not have much knowledge regarding TSR rings.
@@SandeepAcademy9 please make vedio on different types of trays used in refinery and gas plants, along with coulmn internal.
Thanku so much sir