Terex mini excavator unload from truck

Поділитися
Вставка
  • Опубліковано 10 січ 2025

КОМЕНТАРІ • 405

  • @50dugo
    @50dugo 7 років тому +10

    Good video .I just going to fix my ramp. Thanks for the warning!

  • @davidburrell5883
    @davidburrell5883 2 роки тому +14

    This man is rough. But got the job done ✅

    • @craigkerr9281
      @craigkerr9281 Місяць тому

      Slow doesn't mean rough! Or green!

  • @ManualM3
    @ManualM3 2 місяці тому +1

    Great job man! Forget all the wannabe OSHA inspectors in the comments. You got the job done.

  • @johnkerr1115
    @johnkerr1115 7 років тому +29

    The best way to unload the digger is close your eyes and track straight off and hope for the best!

  • @alphoooo
    @alphoooo 8 років тому +88

    That is real easy to do. He made it look hard.

    • @stevenkenyon4910
      @stevenkenyon4910 8 років тому +3

      you are correct. touch the tracks.spin bucket on bed ,walk off,too easy

    • @emosean66
      @emosean66  7 років тому +22

      I love all these comments
      Yea I might be dumb and yes I'm not an operator but fuck it was fun !! Thanks all for watching

    • @scottmcquarrie7295
      @scottmcquarrie7295 4 роки тому +8

      It would have been about 500 times easier if he would have walked off blade first.

    • @jonasmagarro4358
      @jonasmagarro4358 4 роки тому +2

      Simple as you see but SAFETY FIRST is the best GOT IT

    • @jonasmagarro4358
      @jonasmagarro4358 4 роки тому +2

      Simple as you see but SAFETY FIRST is the best GOT IT

  • @mikep60
    @mikep60 2 роки тому +15

    That's a ridiculous thing to do. As an operator of a 325 cat I can tell u we only unload like this if we have no choice. This is just pretending to be an operator and putting urself and those passing cars at risk

    • @Tha_bro
      @Tha_bro Рік тому +6

      Yeah that’s why my truck has a special feature it’s called ramps in it

    • @mikep60
      @mikep60 Рік тому +1

      @A random person Exactly.

  • @duniaalber3178
    @duniaalber3178 3 роки тому

    good skill, greetings from Indonesia country chanel👍

  • @goaheadmakeourdayscooterpe6724
    @goaheadmakeourdayscooterpe6724 6 років тому +10

    Fine job till a hydraulic line blows because I'm sure none of those cylinders have check valves like a lift or bucket truck would have in case of a line failure.

  • @xr8brisbane
    @xr8brisbane 9 років тому +15

    Possible future ideas........ramps and a decent operator.

  • @gunnslinger7774
    @gunnslinger7774 4 роки тому +4

    I think it took a set of stones to even try...
    Good work bro...

  • @itscoconutsaregood
    @itscoconutsaregood 5 років тому +1

    MAD RISKY but clever man. I wish my job was as exciting as this.

  • @Olegaka5
    @Olegaka5 Рік тому

    Очень хотелось бы посмотреть погрузку экскаватора ,на эту платформу, этим же водителем ... 🤓👍

  • @mattlock1896
    @mattlock1896 9 років тому +20

    Think i would buy me some ramps there slick!

  • @S_M.SolutionsLtd
    @S_M.SolutionsLtd 6 років тому +2

    That guy has got some confidence but no regard for his safety or other people. Not to mention his skills leave much to desire.

  • @arthurwhite8245
    @arthurwhite8245 Місяць тому

    A good advert for ramp manufacturers.

  • @Kiah-sn1ux
    @Kiah-sn1ux 3 місяці тому +1

    Got em'.....you go bro!

  • @excavatortv1071
    @excavatortv1071 3 роки тому +1

    Good job 👍👍

  • @tonychandley1309
    @tonychandley1309 Рік тому +1

    Stopped watching with 2:40 left, get u a trailer bro. 🍺🍻👍

    • @craigkerr9281
      @craigkerr9281 Місяць тому

      You totally missed it
      MR EARLY OUT!

  • @fatguyonalittlebike3336
    @fatguyonalittlebike3336 4 роки тому +7

    The craigslist ad be like "only 3 hrs on it, its brand new"

  • @TakeAsNeeded4Pain
    @TakeAsNeeded4Pain 2 роки тому +13

    That's pretty dangerous though, yeah? It even slipped at 1:29 that's how accidents happen man

    • @Bennysol
      @Bennysol Рік тому

      He had the bucket too far ahead and the blade should have been on the other side

  • @nubalasti7216
    @nubalasti7216 5 років тому +1

    Like your guts man! This is amazin'!

    • @craigdonaldson6308
      @craigdonaldson6308 5 років тому +3

      It's not amazing it's completely stupid. It's only amazing to other stupid people

    • @simonchant761
      @simonchant761 4 роки тому +1

      He's a fool

  • @KING-FU
    @KING-FU Рік тому +1

    I love seeing this method from foreign countries when they’re loading / unloading 20 ton excavators on an off 8-10 ton flatbed trucks and it’s not only bending the bed, but lifting the front of the truck 3-5’ off the ground... all while parked on an incline. 🤣

  • @Tom-90210
    @Tom-90210 2 місяці тому

    Not bad for your first time.

  • @Ronnieprice1979
    @Ronnieprice1979 4 роки тому +7

    I've seen this done before and it didn't look nearly as difficult as this guy made it look.

    • @thorr18BEM
      @thorr18BEM 4 роки тому +6

      I've watched like 10 of these and this guy was obviously new at it. The pros all had their first time also once. This guy just filmed his.

    • @wumbologypatrick
      @wumbologypatrick 2 роки тому +5

      Its difficult when you have a machine worth $40,000 and you work for a company so cheap they won't even buy a trailer that can unload equipment. Good operator, terrible company.

    • @wumbologypatrick
      @wumbologypatrick 2 роки тому +1

      And I guarantee this guy still has more useful skills than you will ever have with your 6 UA-cam followers in the 10 years you've been "making content"

    • @Ronnieprice1979
      @Ronnieprice1979 2 роки тому

      @@wumbologypatrick You're a 🤡. "Useful skills"?? So if he would've fell into oncoming traffic, would it have been a useful skill? As for my 6 subscribers, I don't make content dummy!! As far as my "useful skills", I don't need UA-cam validation like some people. But go ahead and keep being a comment super hero, it fits you well Eddy

    • @petethenomad
      @petethenomad Рік тому +1

      Sketchy as heck. Way easier if he had turned the machine around on the flatbed so he could put the blade on the ground first. I do it all the time. And wear your seatbelt.

  • @trydawg1
    @trydawg1 7 років тому +1

    great video about WHAT NOT TO DO AND HOW NOT TO DO IT!

    • @emosean66
      @emosean66  7 років тому

      Brian Taborek
      Exactly! See you get itl! Lol
      I'm not an operator but had fun trying
      Thanks

    • @donkoch8010
      @donkoch8010 5 років тому

      And we wonder why we have so many dumb rules in the construction industry. Hope he got slapped with a heafty fine. If not keep on doing it he will end up dead yet

  • @bobdelta9208
    @bobdelta9208 10 років тому

    Wawoo great work man
    I like it

    • @emosean66
      @emosean66  7 років тому

      Robert Salloum delta
      Thank you
      I'm not an operator but it sure was fun trying

  • @malcolmbridge5910
    @malcolmbridge5910 2 роки тому +4

    They make ramps for these situations, the job would be done already by the time you got that off the truck.

  • @ladislavleitner1729
    @ladislavleitner1729 Рік тому

    Hey, it’s my machine!

  • @jacelandadventures1523
    @jacelandadventures1523 4 роки тому +14

    Putting a lot of trust in that machine! Disasters happen because of that

  • @oldschoolcarl9247
    @oldschoolcarl9247 4 роки тому +1

    Is that not a rollback???

  • @atomargentfishing
    @atomargentfishing 3 роки тому +1

    Kerenn 👍🏻👍🏻👍🏻

  • @sollionsollion8962
    @sollionsollion8962 6 років тому +8

    Keep on practicing. Overall for the last part

  • @frankleonard6570
    @frankleonard6570 4 роки тому +5

    crazy! i love this kinda stuff 👍

  • @brian52479
    @brian52479 2 роки тому

    Just because you can, doesn't mean you should!!!

  • @STSGuitar16
    @STSGuitar16 4 роки тому

    Is this standard procedure for these things?

  • @corneliushough5373
    @corneliushough5373 5 років тому +1

    Never a doubt, didn't even bother to stop traffic.

  • @oldboilers
    @oldboilers 6 місяців тому

    Hope the customer wasn`t paying delivery time on this job. Well done old mate, but a pair of ramps would help!

  • @longy6612
    @longy6612 4 роки тому +2

    great job

  • @ryanchristopher5906
    @ryanchristopher5906 4 роки тому +7

    Looks like he was trying to look cool
    But didn’t have much of a clue on what he was doing.

  • @lsatq
    @lsatq 9 років тому +30

    why do that next to a busy road. If you flipped the machine someone could get killed.

    • @master_vator
      @master_vator 8 років тому +2

      and spin, into traffic, you could have spun the other way, goes to show i dont think he knows this machine very well

    • @sheridenboord7853
      @sheridenboord7853 7 років тому +3

      He is an absolutely shit operator. Now you know he doesn't know the machine at all.

    • @sheridenboord7853
      @sheridenboord7853 7 років тому +1

      With a bit of luck.

    • @thatbiguy1975
      @thatbiguy1975 7 років тому +4

      yeah but the earth is overpopulated and if you read any youtube comments you know most people are a-holes.

  • @tonyalways7174
    @tonyalways7174 Рік тому

    Clever brave and skilful but a few dollars on ramps would make life easier and the job a lot quicker.

  • @shaunsinclair350
    @shaunsinclair350 5 років тому +2

    Great job showing off, but if he is such a gun operator.?? Why didn't he not take the stress off his drive motor and those tiny little rubber tracks, and bucket steer the turn he did on the way into the driveway. Or should I say the shakey shake,

    • @VGofRI
      @VGofRI 5 років тому

      shaun sinclair I thought the same.

  • @川上弘-m9w
    @川上弘-m9w Рік тому

    素晴らしいテクニック

  • @andybunney7902
    @andybunney7902 Рік тому

    There's a thing called ramps.. would of been off in 60 seconds haha

  • @vixvela5252
    @vixvela5252 Рік тому

    Great job

  • @Xae_plays
    @Xae_plays Рік тому

    Should have dropped the blade sooner to lift the bucket off the trailer. Good stuff though

  • @hudsonhawk0016
    @hudsonhawk0016 5 років тому

    Well that took some balls.

  • @rafaelmolina123
    @rafaelmolina123 2 роки тому +1

    That was intense 😆

  • @Dirtbug473
    @Dirtbug473 7 років тому +8

    Dangerous...if a hydraulic line snapps...whaaaaam...broken neck. I can see doing this in an emergency...but ramps or a equipment trailer is a must....I have been in excavating 30 years...I would never allow this as a normal loading procedure. I notice a lot of youtube videos from out side the US do this a lot.

    • @dangeary2134
      @dangeary2134 Рік тому

      This is how they get rubber-tired backhoes onto the tops of gondolas to unload ties for the railroad.
      Yes, hydraulic lines break, but usually under a lot more load than this.
      I’ve had them break on machines with a fully loaded bucket, and right by a truck I was loading.
      I was lucky. I had just started, so the hydraulic fluid was cold.
      I got DRENCHED in it.
      Loaded up, went back to the shop, replaced the line, and had my wife bring me clean clothes.
      Hydraulic fluid NEVER comes out, so my clothes got tossed into the trash!
      As far as this loading?
      I would do it.
      I know what those things are capable of, and how to keep them out of trouble.
      This isn’t the worst this machine will be in!

  • @milosradic7835
    @milosradic7835 8 років тому +1

    pametni amerikanac,mora on naopako i komplikovano...

  • @Maskinservice
    @Maskinservice 7 років тому +22

    Get out of the cabin before someone gets killed!
    You make almost every possible fault here! This clearly shows that you have to little
    experience to load/unload without ramps.
    1. The show starts already at 4 seconds by not using dipper in while tracking with the bucket on the ground. An experienced operator would never sink to that level. It would be far below his dignity. This just creates "scrub marks" on the ground, the visible sign of a newbie that is trying to do much more than he should.
    2. Tracking with the track levers instead of using the foot pedals clearly shows that he should have chosen another carrier. And he isn´t even having his hands at the levers, in such a situation.
    3. 2:12 once again scraping the bucket to the ground to show that he isn´t capable of doing it the right way.
    4. 2:30 Tracking with at least one track in the air. This is one of the reasons you should NOT load a digger with the blade to the front if you intend to climb of the skip.
    The other one is safety. It is always much safer to load/unload with the blade to the rear of the skip.
    5. 2:50 Turning to the left where all the traffic are.
    6. 3:04. Scraping the bucket on the bed. Sweet Baby Jesus! Get out of the cabin!
    7. 3:12 to 3:30. Is this a joke?
    8. 3:41. Someone says "beutiful". What? Ok, it was beutiful to make that many mistakes and survive but I guess that wasn´t what was meant.
    9. 3:40-3:47, turning the undercarriage 90 degrees without lifting the tracks from the asfalt? Yes, probably ok for a newbie that doesn´t know how to do it right but not ok for a real digger operator.

    • @emosean66
      @emosean66  7 років тому +16

      RobbanxC I'm not an operator
      Just helping a friend
      I pump concrete,and watching these guys stair at this for about 39 min
      I was fuck it let me try this shit

    • @boomstickkid
      @boomstickkid 7 років тому +9

      there is no right way to load without ramps/ lowboy trailer. Dont come in here like you know some shit.

    • @ignreddy
      @ignreddy 5 років тому +4

      Some excavators have really bad pedals.. on excavator i sometimes work on you cant go straight with pedals.. To be honest it is obvious he isn't a skilled operator.

    • @scottbaker4314
      @scottbaker4314 5 років тому +1

      RobbanxC your grammar is inexperienced

    • @simonchant761
      @simonchant761 4 роки тому

      Couldn't agree more my friend

  • @roconnor01
    @roconnor01 3 роки тому +5

    And if it had fallen off into moving traffic,what then?

    • @Billmull8622
      @Billmull8622 2 роки тому +1

      There’d prob be damage but who knows it didn’t happen

  • @開啦-c4u
    @開啦-c4u 8 років тому

    Crazy excavator DRIVER!!!

  • @phatcat1210
    @phatcat1210 10 років тому +1

    Lucky boy, you nearly fucked that up !

  • @janiikowalskiiie5489
    @janiikowalskiiie5489 Рік тому

    Tak tak gwoździe też można wbijać kamieniem . Niepotrzebne utrudniania sobie życia wystarczą dwie przenośne rampy i koparka zjeżdża w 5 sec

  • @azentioced9
    @azentioced9 Рік тому

    u were lucky there!

  • @phillipricher7665
    @phillipricher7665 Рік тому

    balls of steel !!

  • @massimocriscuolo4533
    @massimocriscuolo4533 4 роки тому

    Bravo!!👍👍👍

  • @longy6612
    @longy6612 4 роки тому +1

    i had to do this the other day fuck me did i have the sweats on the go lol

    • @emosean66
      @emosean66  4 роки тому

      You can see I was a little shaky!
      FYI that was the one and only time I did this!🤣😂

    • @longy6612
      @longy6612 4 роки тому

      @@emosean66 we ended up having to do it for about 2 weeks as our ramps got stolen. I got used to it after about the 10th time lol

  • @DanielFlores_1986
    @DanielFlores_1986 3 місяці тому

    Dammitboy 🔥🔥🔥

  • @dungeondark
    @dungeondark 3 роки тому +1

    Pretty ballzy for an amateur operator but hey, you pulled it off.

  • @XsOsX19
    @XsOsX19 2 роки тому +3

    Why wouldn't you just get a set of ramps 😂

  • @ryanritchings2834
    @ryanritchings2834 8 років тому +4

    Fair play you got it off and most likely 90% of people commenting couldn't do
    It but why do it on a busy road

    • @emosean66
      @emosean66  7 років тому +3

      Ryan Ritchings
      Bro! This is Los Angeles every road is busy
      I'm not an operator but I really had fun trying
      Thanks for the comment
      👍🏻

  • @wasjoko5475
    @wasjoko5475 4 роки тому

    Good..👍

  • @whatyousaidbud
    @whatyousaidbud 9 років тому +1

    not only is it safer than ramps, it's faster too! lol!

  • @callzz17
    @callzz17 Рік тому +1

    If the blade was in front,would have been so easy to do it

  • @disndat1000
    @disndat1000 2 роки тому

    Totally agree. Ramps are for weaklings. And they cost like 500 Dollars!!! Ok they save you 10 minutes arriving and departing every single day, but what the hell...

  • @philk9343
    @philk9343 9 років тому +9

    This is the most inexperienced operator ive ever seen

    • @kencollins7811
      @kencollins7811 9 років тому +1

      +goodcat1982 if you knew anything about excavators you would know that operating them like that will damage the machine. plus he was lucky he did not have an accident and hurt himself = inexperienced

    • @emosean66
      @emosean66  7 років тому +7

      I'm not an operator, just a dumb ass
      I had fun though
      Thanks

    • @mcmord321
      @mcmord321 Рік тому

      You haven’t seen allot of operators then.

  • @01mustang05
    @01mustang05 8 років тому +1

    Think Float Blade should be first off the truck and lowered all the way down, then flip around with bucket. But truck driver is needed to drive truck away. So I guess this is the only way for a one man show unload.

    • @petethenomad
      @petethenomad Рік тому

      I get out and do that myself, drive forward a bit. Not too much.🙂

  • @simonchant761
    @simonchant761 4 роки тому +2

    Don't be so tight and buy a set of ramps

  • @sahmadi1000
    @sahmadi1000 6 років тому

    I wish I could do that. Crazy is all right.

  • @emosean66
    @emosean66  9 років тому +8

    I should show you the video of me loading bobcat on same truck no ramp .. If you think this is stupid you really should see that one ...

  • @akosszucs1455
    @akosszucs1455 Рік тому

    Works 9/10... 1/10 something breaks...

  • @charlieboggs5210
    @charlieboggs5210 2 роки тому

    I do that all the time off my hydraulic dovetail😅

  • @ZteveW
    @ZteveW 9 років тому

    I'm not doing that with my Home Depot rental but you know your shit dude!

  • @avexcavate2588
    @avexcavate2588 3 роки тому

    Much easier to have a set ramps and safer your life is more important than showing off and your ramps can become very useful on the job people that load there machines this way are adding more unnecessary risk you only have one life

  • @2aguy144
    @2aguy144 Рік тому

    That dude got lucky. He’s no operator.

  • @DarrenHill-k2x
    @DarrenHill-k2x Рік тому

    Invest in some ramps

  • @johnrweiss
    @johnrweiss 2 роки тому

    now show us you getting back on!

  • @snort455
    @snort455 Рік тому

    maybe try a ramp

  • @debbiedugger9681
    @debbiedugger9681 4 роки тому

    Poor fellow..children pray hard for your Daddy to come home...

  • @ArunArun-dt7wv
    @ArunArun-dt7wv 2 роки тому

    Thank you boss

  • @marcyounker6379
    @marcyounker6379 4 роки тому

    Ladies and gentlemen look s like we spent all our money on the truck and excavator and can not afford to rent a trailer

  • @digndurt6936
    @digndurt6936 4 роки тому

    No ramps needed just a late start to the day.

  • @bencred
    @bencred 4 роки тому

    Parabéns operador realizou a manobra, mas demonstrou insegurança.

  • @timkis64
    @timkis64 Рік тому

    its funny.everybody can buy an excavator.but nobody can buy a trailer to haul them.& generally do more damage unloading & loading them than what the cost of a trailer is.

  • @usageorgepa.3293
    @usageorgepa.3293 7 років тому +3

    EVeryone has a beginning,,lol.. He got it off alright so,,,,,,good job! As for the naysayers below even a seasoned operator without being familiar with a piece of machinery would of done about exactly the same...Armchair operators and little else.

  • @32davkav
    @32davkav 7 років тому +1

    just fork out the money for some ramps, alot easier...

    • @scottbaker4314
      @scottbaker4314 4 роки тому +1

      You must be a UA-came theres some of us who are You Tubers we're the ones who are proving to the world that anything can be conquered. Leave being brave and adventurous to the rest of us "Wolves"

  • @sportscarclinic
    @sportscarclinic 6 років тому

    Glad the engine is dry-sumped, or the pick-up would be sucking air instead of oil. Oh, that's right, it's not dry-sumped. Whoops...

  • @mariooperadordemaquinaspes5556
    @mariooperadordemaquinaspes5556 4 роки тому

    Like👏👏👏👏👏👏👏👏

  • @kimdani1795
    @kimdani1795 Рік тому

    Would Quicer witth ramps

  • @donrussell1881
    @donrussell1881 2 роки тому

    That is one hell of a crane operator.

  • @galewinds7696
    @galewinds7696 Рік тому

    A pair of sliding ramps and he could load/unload that while he's thinking about doing it this way.

  • @csud9540
    @csud9540 5 років тому +2

    Learn to use ya feet and hands together andtake the weight of ya tracks when scissoring them to turn dude,

  • @TheFatPeguinBand
    @TheFatPeguinBand 4 місяці тому

    The suspense!!!

  • @marlin123ish
    @marlin123ish Рік тому

    Wouldn't even attempt that at half the height. Ramps are cheap compared to what could happen.

  • @gerriecosme6452
    @gerriecosme6452 Рік тому

    why risk a $ 40,000 dollar machine, also the angle of the machine that engine is starving for oil i am assuming he is not the owner.

  • @dinawolff4645
    @dinawolff4645 9 років тому +3

    wo hast du denn baggerführerschein gemacht im lotto gewonnen so siehts aus omg Wtfund schon mal was von Rampen gehört

  • @sandip..1124
    @sandip..1124 3 роки тому +1

    કીમત સૂ સે

  • @isabellavida1831
    @isabellavida1831 8 років тому +3

    No Ramps needed ????? o well......