Brother Multifunction Printers MFC-L2710 L2730 L2750 Replace the Toner Cartridge
Вставка
- Опубліковано 22 сер 2024
- How to replace the Brother Toner Cartridge TN-730 TN-760 TN-2420 TN-2410 TN-2450 TN-2430 for use in Brother laser printers and multifunctions MFC-L2710DN L2730DW L2750DW
- Make sure that the machine is turned on.
- Open the front cover.
- Remove the drum unit and the toner cartridge.
- Push down the green lock lever and take the toner cartridge out of the drum unit.
- Unpack the new toner cartridge.
- Remove the protective cover.
- Put the new toner cartridge into the drum unit until you hear it lock into place.
- Install the toner cartridge and drum unit assembly back into the machine.
- Close the cover.
Reset toner:
• How to reset Brother t...
Thank you. You also need to slide the green tab at the top, across and back a couple of times to clean it every time you replace the toner
I warch this Everytime I need to change my toner, which isn't very often. For some reason I can never remember. I'm so happy this video is here! Thank you!
Thank you. You might want to add the recommended "Drum unit Corona wire cleaning is required every time you replace the toner cartridge.(This was printed on my toner cartridge bag)" This is the green slide button at the top of drum unit.
My Dad really loved this and made him smile. Thank you. Wanted to fix his printer.
Every instructional should be like this. Thanks.
After looking at it for two hours and finally watch the video thank you
Your dialect got my focus. It sounds concise w/the subtitles.
Quick and straight to the point. My kind of video! Thank you!!!
Thank you so much!!! Your instructions are superb. I truly appreciate this. :-)
Easy to follow. Very clear. Thank you
Thank for the video. I had paper jammed in the cartridge and did not know how to remove.
Your very fast!!! Right to the point thank you.
TC
1 second ago
How to do it another way. Press "Menu", select "General Setup" , go down and select "Replace toner", then go down and select "continue" - you should be able to print more now.
You’re a life saver man!
Excellent easy instructions, Thank you!
Thanks for your valuable video. It really helped !
Thank you. Straight to the point. Very helpful
Thank youj!!! I could watch in my language. it is great!!
Nice short and to the point
Very simple and quick 👍👍👍
Perfect instructions. Thank you!!!
Thank you, this really helped.
Thank you.
Thank you!
Thank you so much….such incredible clear instructions ..thank you again
Thank you
thank you!
Saved time thanks
Very helpful. Thank you 👏
You are a GOD
Awesome thank you!
Thank you very much!
Thnx a bunch bro.
Thank You
Thank you :)
Thanks
While inserting the replaced cartridge, it is not fitting well. I replaced it with the older one and it got fit perfectly but the new one is causing an unknown problem.
If you are sure it's the correct cartridge model, that cartridge is defective. Did you remove all the packaging of the cartridge?
Hello I have an MFCL2710DW and when the original cartridge ran out of toner, I replaced it with a highly rated aftermarket cartridge from Amazon. It did not detect the cartridge. I then tried two genuine Brother cartridges, one purchased from Amazon and the other from Staples. The printer does not detect any of these. The message states "replace toner". Any thoughts on how to resolve this?
Here you can find suggestions on what to do in case of not detected Brother toner cartridge.
ua-cam.com/video/dDaB7ppILgE/v-deo.html
Thanks!!!!!
STALNO MI SE POJAVLJUJE DA PROMIJENIM TONER. KUPIO SAM NOVI I ZAMIJENIO I OPET ISTO PIPE. ŠTA DA URADIM?
Ho un problema con una BROTHER LASER B/N MFC-L2700DW che ha toner mezzo pieno ha iniziato a chiedere la sostituzione e una volta sostituito con uno nuovo continua a chiederlo insistentemente... Hai qualche suggerimento?
Grazie mille
Prova con i metodi di questo video
ua-cam.com/video/q8jU1NHJc3A/v-deo.html
What if there is no green lock lever. My cartridge has green levers, but not printer.
or rather the housing for the ink has a green cover, Unfortunately it wasn't;visible until I removed the housing.
The leve could be of another color, especially if it's a compatible cartridge
I made a mistake. I changed the starter toner (30% remaining level) to try the new one with the printer off (dcp-2530DW). After, again i was I put back the starter toner with printer off. Now the status monitor shows 100% BK for the starter toner. What can i do now; Is this serious problem?
Change the toner when the quality becomes low. Why is it a serious problem?
@@viandant5 thank you!
It is not done. There us a green slider
When I put it in, it says "open the front cover. then install toner cartridge". I did that several times and it is still not working.
Are you sure that toner cartridge is working? Does that cartrisdge has the chip in the correct position?
@@viandant5 Yes it was working until we suddenly unplugged the printer. after we plugged it in, we got this error and no matter what it is not working!
We changed the toner and the new one is now working fine.
@@cyrusIIIII Good to know
Why display show replace toner after replaced ?
Try this: ua-cam.com/video/dDaB7ppILgE/v-deo.html
ok
I literally did this,I put in the new toner still saying replace toner
Try this ua-cam.com/video/dDaB7ppILgE/v-deo.html
yay
Where is the ethernet plug?
Id that printer has a network card is in the back of the printer
You didnt show how to clean the Drum Wire Corona unit it tells you on the packaging you slide the green tab across then back. *No Gold star for you.*
This video is talking about toner cart. The corona wire is in the drum unit
@@viandant5 Correct and on every new toner installation it requires cleaning, It tells you on the foil packaging that the* New Toner comes in *
@@goldentrowel1968 I think ypu have to clean it only if necessary
You can make a video, goldentrowel1968
yeah that would be good wouldnt it @@loriwest1917
Thank you!
Thank you.
Thank you!