OH MY GOSH. THANK YOU SO MUCH GOD BLESS YOUR SOUL. I've been wondering how to do this stupidly simple operation for years. And also your commentary is absolutely top notch. Subscribed.
THANK YOU SOOOO MUCH, NOW I CAN FINISH MY SCHOOL PROJECT THAT HAS BEEN TAKING FOREVER, BECAUSE I MADE A COMPLICATED 3D SKETCH WHEN WE WERE SUPPOSED TO JUST DO A 2D SKETCH AND EXTRUDE IT.
I was getting so frustrated not being able to find that Share Sketch feature, there being absolutely no mention of it in all the forums I visited about this workflow, I was about to just give up and quit. Thanks for the help, guy.
In inventor 2017 I had to type texts on surfaces. I encounter time and time again I can't see font that I need to use, it's not there on the list, I know I have the font installed (got font managing software, that font shows up in Photoshop). Why does inventor only show specific fonts, do fonts need to be Truetype or Opentype smth?
ABSOLUTELY LOOOOOVE your commentary.... what does TFI stand for? The F&%$ Is this??? hahaha just kidding, love you though, I have just subscribed. Looking forward for more of your videos.
It's nice to be able to though. It makes finding the right items in your model tree easier. Also drag-and-drop accomplishes the same thing if you put it somewhere outside of the consuming operation.
7 years later, but I watched this, followed it until Inventor crashed, and I have to say that some of your frustrations with Inventor are also mine. Navigation SUCKS. It keeps giving me error messages after performing actions that the program's supposed to be able to perform. So, I need to sometimes spend hours looking for a workaround. I come from a VFX background with Maya, and while Maya's not geared for engineering, its overall modeling and animation features blow the pants off Inventor's. Hard to believe these both come from the same company.
OH MY GOSH. THANK YOU SO MUCH GOD BLESS YOUR SOUL. I've been wondering how to do this stupidly simple operation for years. And also your commentary is absolutely top notch. Subscribed.
Thanks man. I've got so many of these videos that I can't even remember making this one!
Fantastic! I've been trying to do this with a curved/tapered wireframe! Thanks for showing us how it's done!
Just what I needed to quickly design a multifaceted cover over a frame. Thanks, and I'll check out Pluralsight as well.
Thank you so much for this! was searching for a good bit to learn how to do this! Your instructions were easy to follow and really helped me a lot!
THANK YOU SOOOO MUCH, NOW I CAN FINISH MY SCHOOL PROJECT THAT HAS BEEN TAKING FOREVER, BECAUSE I MADE A COMPLICATED 3D SKETCH WHEN WE WERE SUPPOSED TO JUST DO A 2D SKETCH AND EXTRUDE IT.
I was getting so frustrated not being able to find that Share Sketch feature, there being absolutely no mention of it in all the forums I visited about this workflow, I was about to just give up and quit. Thanks for the help, guy.
Another gem I just stumbled over.
Wow! Another good tip for building my models! Thank you
You can also stitch all surfaces, it then gives an option to turn into a solid if there are no open zones
this is very helpful, especially 4:25
super good video for surface
Thank you man, you've saved my day. BTW you're a nice commentator))
you are the BEST! thanks you SOOO MUCH!!!!!!
and I subscribe for just this one video. Thank you 😊
In inventor 2017 I had to type texts on surfaces. I encounter time and time again I can't see font that I need to use, it's not there on the list, I know I have the font installed (got font managing software, that font shows up in Photoshop). Why does inventor only show specific fonts, do fonts need to be Truetype or Opentype smth?
You saved my life...
As they say up north: A little Belter !
Thanks Neil.
Jim
Any workflow tips for working around Inventor's lack of a chord fillet feature?
Hellow. Can you use a program that sohw your keystrokes , it was so usefull for learn indirectly the common and useful invertor comands used for you
ABSOLUTELY LOOOOOVE your commentary.... what does TFI stand for? The F&%$ Is this??? hahaha just kidding, love you though, I have just subscribed. Looking forward for more of your videos.
Excelente aporte. Gracias
how can you flatten the solid at 6:00 ? like an origami
Thank you so much! Very useful
Is it possible to make a sheet metal part by using this method?
Direto ao ponto!!!
hi, when i do sculpt it tells me there is a modelling issue... any sugguestions?
You actually don't need to click share sketch. If you just make it visible and use it again it gets shared by auto.
It's nice to be able to though. It makes finding the right items in your model tree easier.
Also drag-and-drop accomplishes the same thing if you put it somewhere outside of the consuming operation.
Is it possible to make the frame from the solid body?
hehehe :D
That's the same reason I'm here. I need to go backward from an extrusion to a 3d sketch.
can you explain the difference between solid body and surface modelling
Thanks I liked that.
Thanks!!!!
7 years later, but I watched this, followed it until Inventor crashed, and I have to say that some of your frustrations with Inventor are also mine. Navigation SUCKS. It keeps giving me error messages after performing actions that the program's supposed to be able to perform. So, I need to sometimes spend hours looking for a workaround.
I come from a VFX background with Maya, and while Maya's not geared for engineering, its overall modeling and animation features blow the pants off Inventor's. Hard to believe these both come from the same company.
Legend!
How do you unselect automatic edge chain?
timone1002 it was a option on the left bottom corner of the window that was open for the feature/line selection it looked like
Alright now I can continue my at st
Looks like Santa's Sleigh
I love you
WHAT the fuck?? this is my favorite video xdddddddddddddddddddddddddddd