Heating for green bearing is no needed ! Don't use a steel hammer !! For these 2 remarks is a Teflon hammer the tool (no damaging to axe or bearings) !!! Put some new grease into the gearbox for lubrication & noise reduction! Belt tension : turn it so tight with the screw (motorplate) that you can push (with 2 fingers) the upper part & the under part of the rubber belt nearly in contact with each other . The screws for fixing the motorbloc will give a little extra tension on the belt ...
Great video Dean. Quick question if u dont mind. My DW718 has all of a sudden gone stiff. When I push down to make a cut the saw stays in that position and I have to use force to rise it up out of the throat plate. Would this be a bearing issue or something else? Thanks again.
Hiya mate, I've got an erbauer mitre saw that the motor spins but the blade doesn't? The blade isn't loose but isn't driven by the motor...any ideas? Thanks mate I love your videos
Great video
Excellent video. Thank you.
Heating for green bearing is no needed ! Don't use a steel hammer !! For these 2 remarks is a Teflon hammer the tool (no damaging to axe or bearings) !!! Put some new grease into the gearbox for lubrication & noise reduction! Belt tension : turn it so tight with the screw (motorplate) that you can push (with 2 fingers) the upper part & the under part of the rubber belt nearly in contact with each other . The screws for fixing the motorbloc will give a little extra tension on the belt ...
Great video Dean. Quick question if u dont mind. My DW718 has all of a sudden gone stiff. When I push down to make a cut the saw stays in that position and I have to use force to rise it up out of the throat plate. Would this be a bearing issue or something else? Thanks again.
The return coil spring could have snapped
Hiya mate, I've got an erbauer mitre saw that the motor spins but the blade doesn't? The blade isn't loose but isn't driven by the motor...any ideas? Thanks mate I love your videos
With belt > belt broken , with gear transmission > teeth gone /used , gear slips on his own axe , Stainless steel parallel key used
Where do you get the bearings from ? Need them for my DWS780
CHEERS
Reliance
maybe is time to you to buy a body camera