Commenting to keep this video at the top of the search list because it just saved me - linkage broke in the middle of a three point turn, took the cover off, popped it back on and put a little blu tac on the end to stop it slipping off just until I could get the car home and order a replacement bush
This video saved me today! I’m so crap with cars! I’ve ordered a bush from you, for now ive cut a 20mm rubber gromet down to fit and put a load of bluetac on the outerside to hold it in place haha it’ll do for now
Thank you so much I had thought that I had a gearbox issue or clutch needed replacing but I did the diagnostic and it turns out that the bushing on the gearbox side is bad like as soon as in touched it disintegrated in my hand so thank you I can rest easy now💆🏾♂️🙌🏾👏🏾
I have a similar issue where the linkage became disconnected on the gearbox end. The bush is completly disintergrated. I still have 3 & 4, just no 1-2 & 5-R. Can you advise if the bush can be replaced or is it a completely new linkage needed?
Would this issue cause the gear stick to be stuck in reverse gear as this is my problem,it still drives in reverse just can not get it out of this gear .
@@klinkske so the same bushing works for both ends, right? Did your fail all the sudden, kinda you were no more able to go into gear except 3 and 4? 78k km is not that bad, i suspect mine is going to help with 30k..... 2016 zc32s. It has become "hard" to return from 5th 6th or reverse to neutral position. in the past, it used to return on it own, now i have to manually take it back. All the gears enter perfectly, and the return from 1-4 to neutral position is smooth as always. ua-cam.com/users/shorts4hnywjj9gwA
You just saved me £780 on a Garage repair. I appreciate you so much.
Commenting to keep this video at the top of the search list because it just saved me - linkage broke in the middle of a three point turn, took the cover off, popped it back on and put a little blu tac on the end to stop it slipping off just until I could get the car home and order a replacement bush
Sick video mate🤣😅come in proper handy tonight had the same issue so just ordered the kit💯
Well done! Thank you, I'll order my replacement bushes today 😊 A bit fiddly but easy enough to fix.
Amazing 👏 thhhhxxxxxx🫶🙌👍
This video saved me today! I’m so crap with cars! I’ve ordered a bush from you, for now ive cut a 20mm rubber gromet down to fit and put a load of bluetac on the outerside to hold it in place haha it’ll do for now
Thank you so much I had thought that I had a gearbox issue or clutch needed replacing but I did the diagnostic and it turns out that the bushing on the gearbox side is bad like as soon as in touched it disintegrated in my hand so thank you I can rest easy now💆🏾♂️🙌🏾👏🏾
Great video!!
Hey there,
Have been quoted £649+VAT for this repair, including parts and 4-5 hours labour.
What would you advise I do?
Is this part better than the OEM part? does it make sense to switch it out before hand or is failure not that common?
Hey mate i'm in Australia and having trouble finding that link too, any chance you can send it to me? Thanks!
so you say the bushing that goes in the transmission end, is 100% like the one that goes in the cabin, in the lever?
Thank you
I have a similar issue where the linkage became disconnected on the gearbox end. The bush is completly disintergrated. I still have 3 & 4, just no 1-2 & 5-R. Can you advise if the bush can be replaced or is it a completely new linkage needed?
Hi, You can replace just the bushing and it will fix it. You can purchase them on our store www.cuztoms.co.uk
Would this issue cause the gear stick to be stuck in reverse gear as this is my problem,it still drives in reverse just can not get it out of this gear .
Replaced both sides and very necessary. Only 2015 with 78000km on it. I hope this also cures the bad topgear shifting.
Was one kit enough for both ends? Purple on the interior and the black one under the bonnet?
@@ewanestcourt1386 i ordered a pair, i think both are purple.
@@klinkske so the same bushing works for both ends, right?
Did your fail all the sudden, kinda you were no more able to go into gear except 3 and 4?
78k km is not that bad, i suspect mine is going to help with 30k..... 2016 zc32s.
It has become "hard" to return from 5th 6th or reverse to neutral position.
in the past, it used to return on it own, now i have to manually take it back.
All the gears enter perfectly, and the return from 1-4 to neutral position is smooth as always.
ua-cam.com/users/shorts4hnywjj9gwA
Hi my second gear shift is rough. Like shifting from first to second only is kinda crunchy. Will this fix it?
It might be more likely gearbox issue not linkage. I would start with gearbox oil change.
Hi can you post a link to buy the repair kit I cant find it. Thanks
www.ebay.co.uk/usr/cuz-toms/
link in the description as well. Available as single kits for one side and for both ends as well.