XDI fuel pump, fuel line mod, flex fuel kit and 1400cc injectors installation on fk8 civic type R!
Вставка
- Опубліковано 29 лип 2021
- diy installation on my XDI fuel pump , injectors, fuel line mod and PTR Flex Fuel kit. check it out and subscribe and like. thank you@ shout out to @fk8clinic @kefi @performancenc @taylorking
** edit** I did notice in video where I had my fuel pump at originally. that did not work so I had to rotate it to drop fuel line fitting down. Further in video you'll see my new configuration..***** - Авто та транспорт
Liked, subbed and notifications set
Hopefully you installed the Acuity shifter bushings by now. Definitely one the best and cheapest mods you can do. I noticed the oem one's in the video lol
Complicated but very clean install
Cool video wes
Thank you so much!
This is my favorite type r
Thank you!
Did you unplug the bottom cannon plug from the radiator core and plug that into the flex fuel kit cannon plug? If so does nothing go back into the radiator itself where that cannon plug was unplugged from?
What type of drill bit did you use? And did you taper on top with a bigger bit?
Nice video.
Is the side you drill on the fuel line the pump side or fuel rail side? Reason I'm asking is because my stock fuel line on my '21 is already larger than 5/64 on the pump side. Thanks!
It was smaller side. I think it was the fuel rail side if I'm not mistaken
how much hp/tq did u gain? any issues so far with running e85? I just ordered all my fuel stuff for my fk8
I'm only running e50 till I get a bigger turbo. But no issues I was etuned so know dyno yet. The only dyno I had closed to me has been booked or down for repairs. Hopefully get some updates soon. Last time I was tuned before all the upgrades was around 375 whp 380 tq something in that area I would have to go back and rewatch the video
@14:26 you are transferring some pieces from the stock injectors to the new ones. This is the only video I've seen mention that. Is this specific to the XDI 1400cc injectors?
+1 - this video saved me a lot of hassle. I had no idea those transferred! I was minutes away from installing them....
Who you tune by?
So I installed the same fuel pump and register on the flash pro plus my tuner send me a stater file I flashed the car but the car won t start up fuel is getting to the pump but not coming out what can it be
If it's not pumping out recheck fittings and make sure in hondata you check the fuel box with code to use it. What is the tuner saying?
What engine management are you using for the injectors? Hondata, Ktuner, Motec?
Using hondata flash pro
So the hondata can run 1400cc injectors? I was under the impression that you needed Motec to run bigger injectors unless you used hondata's injectors. Thanks for sharing! Have you got it tuned yet?
Yes you can run Bosch 1400 cc injectors on hondata custom tune. Just can't go any higher like 1600cc
@@1sikbuild thanks man! This is very helpful information.
This is actually easier under the car
Hey bro, do you know if the si and type r have the same injector fitting?
I know it's in same area but if the injectors in itself are different ? I do not know. I would assume yes but don't hold me to it
@@1sikbuild thanks man
I inboxed you on fb with a pic of the ones I found, looks the same but it says for the si
How much you making with all the mods? Including the FSU
With stock turbo 430 with prl over 500
@@1sikbuild sik. Hoping to be a little over 400. I currently have Mishimoto ic, prl intake, afe catless dp, Invidia r400 full exhaust, prl turbo inlet, prl flex, and xdi pump.
@@Aj9y, You'll be more than over 400. Downpipe, XDI and Flex fuel alone will easily get you over 400.
Can I run e85 with stock injectors
Yes with proper tune you can
Where u located?
Charleston SC