Project "EAGLE" HUGE Progress Update!!! New Wheels, Carbon Body, Titanium & More!!!
Вставка
- Опубліковано 28 вер 2024
- PDS Debt is offering a free debt analysis. It only takes thirty seconds. Get yours at PDSDebt.com/CL...
Today we dropped by @CJRaceCars again to see the progress on project "EAGLE" - This thing is really taking shape. We're really excited to get out and set some records on a radial tire, plus I actually fit in it!
Visit cleetusmcfarlan... to check out all of our Cleetus shirts, hats, stickers and more!
FREEDOM FACTORY in person tickets - www.thefoat.co...
For advertising inquiries, email Cleetus@outloudtalent.com
Our 2024 Sponsors:
www.holley.com
texas-speed.com
www.motionrace...
www.nittotire.com
www.summitraci...
heatwavevisual...
PDS Debt is offering a free debt analysis. It only takes thirty seconds. Get yours at PDSDebt.com/CLEETUS
Hell yeah brother
What up my boy
What’s up cleet
1 like 1 push up. Cleet4prez
I think you should call the camaro FREEDOM FLYER AND THE PAINT SCHEME LIKE THE Radio Flyer WAGON
ATTENTION IN THE COMMENTS!
Just to be clear!
There will be a LOT of Titanium peppered around this car, lower control arms, 4-link bars, chute mount, steering column, wishbone and on and on.
THE CHASSIS itself IS MADE OUT OF 4130 CHROME MOLY TUBING!!!
It's built to SFI specifications, titanium WILL NOT PASS TECH or meet these specifications.
When you hear the term "everything titanium", it means anything that CAN be made out of titanium will be made out of titanium, but NOT THE CHASSIS!!!
Appreciate the update bro. Thank you!
Can you explain the 2 inch stagger on the drivers side more. I don’t get it.
@@beamsupreme993The front edge of the driver's tyre is further forward than the other side, basically it gives the staging beam a bigger target to hit, so you get more roll out (essentially the car can start moving before it actually breaks the beam)
@@beamsupreme993, reaction timer starts when the light goes green. But the ET timer doesn’t start until the laser beam reconnects after the front tire rolls away. So it effectively gets a 2 more inches of “running start” before the ET timer begins.
Although on paper it will seem his reaction time is slower because of math from green light to start of ET.
@@stick004 That seems like a loophole needing to be fixed. It's basically cheating. You're tricking the timing system into thinking that you are still stationary when in fact you are all-ready moving, so the ET will be less. So when you run a 4.999 the slip will say you ran a 4, when in reality you know you started moving say 0.01 seconds earlier, so you actually ran a 5, but cheated your way into a 4. Kinda not in the spirit of the whole point of drag racing or achieving a benchmark time.
Not saying Cleetus is a cheater, but if I had a car like that, in my heart I would always be thinking about the dishonest hundredths of a second.
For those who didn't before.....your appreciation for Ty should go way up! You never hear that guy complain and he works as hard as anyone! There is more to welding than just pressing a handle on a gun! We all know Cleet appreciates all his guys! Love this team!
He isn't a welder, he is a fabricator. Welding is just part of it.
AAAND he is at the shop working 22hrs of every day !
@@bdubyah89yep welding is 90 percent prep and fit up,espc on TIG fabrication, industrial pipe welding less, MIG well that is fire and forget, spray it thick
💯 Magic Man
Squirrel: So where do you sit?
Cleet: In the frunk..
Squirrel: What's a FrunK?
Cleet: It's somewhere between the front and the trunk...
Like this comment to force Cleeter to extend the month of freedom into MONTHS of freedom!
YEARS OF FREEDOOOOOOOOM
BROTHER
Dislike! Mother father need a break! But still please produce weekly videos 🙏
Lifetime of freedom!!
Cleet! We demand it brother!
BROTHER… You know you have to reenact the original Cleetus McFarland video that started everything, but this time it’s really your Camaro and you have to have Kyle record it! That would be so full circle and it’ll be a record breaking video if you do it as close to the original video as possible 😂 what a dream come true ❤🇺🇸💪🏻
It's one of the coolest things I've ever seen, crazy quality coming out of that shop!
“Ain’t gonna make that noise with a procharger in it” 12:15
It really should be a pro mod style, big block procharged deal, like the big boys making more than 4,000 hp. But it just seems like they don't want to step up, and instead stay with the Mullet classes with the twin turbos and such.
@@a-a-rondavis9438 mullet makes what, 3000ish? They just turn it down on 275’s. He said before he was gonna run 275’s on this car but it doesn’t have to move the weight that mullet does. We know he’s going big block, a centrifugal supercharger with a small pulley push’s 9-10lbs of boost and it would probably be a 541 hemi or a 572 based engine so it would be 3000-3500 hp. At the weight they are shooting for it’ll be a mid-high 5 second car regardless. I will be happy if they do procharger, change of pace
I've been watching @CJRaceCars channel video updates on this project and he is a no nonsense straight up professional that is delivering you a superior product that is going to move you up the next step at the strip and I can't fricking wait! Let's GO brother!
I never would’ve thought to stagger the front wheels so you can get off the button earlier, but keep the second bulb lit longer. Slick.
I love when cleetus asked to weld Cameron with no hesitation said yes almost like he was going to ask him to weld it 😂
Look at the face of Tye when Cameron walks into the shot, its gold, its at 4:39
HES A PROFESSIONAL! He can quietly add the rework to the BILL!
The ability to build one of these cars blows my mind. Extremely impressive artwork.
This is engineering. Everything is functional and designed with math.
Don't be a dork, it can be both @@mtms42000
Love the use of Streamline 4130 for the top bar above your helmet. It used to blow my mind watching the guys straighten 20ft lengths by hand in a all wood lined straightener.
Really cool to see the other side of this build and Cameron seems chill but all business if that makes sense. No doubt that this is a quality pro build, and shows why Tye was such a great grab for Cleet coming from this shop originally.
The month of Freedom has been great for my gym sessions. Gonna miss it when it's over.
How do you even focus brother😂
@@Cartier2Shiesty Wait pple actually work out at the gym today?
@@atnotthiolnoy1
Some of us do. If not, we end up looking like Cleet...
@@AB-80X 🤣🤣 no string beans 💪🏻
@@atnotthiolnoy1
Or “Italian shirts”💪
I really enjoy the CJRC channel updates. They deserve the attention.
Cameron Johnson and his Crew...Purely Professionals. Just WOW, Cleetus...!!!!
having the month of freedom the same month as your birthday is an awesome gift, gotta say🤠
Incredible race car, incredible model choice, incredible manufacturing, this car is going to be a real 5-second rocket.
Hell yeah brother 🤟🏻
Look forward to these videos every day. You and the guys are killing the youtube game.
CAMERON AND THE GUYS ARE KILLING IT . A WORK OF ART . CANT WAIT !
4:39 zero hesitation…I love it
After asking chatGPT about a dozen questions I think I understand advantage of front wheel stagger. Start time is not triggered by first tire breaking the beam, it is triggered when the beam is re-established after the tire(s) exit the beam. Building the chassis with one front spindle further back delays the start (and red light trigger) because the beam is interrupted longer. Side benefit is counteracting the torque at launch with a longer moment arm on one side for less torque steer.
Oh wow cool thanks for this, didn't know that.
I was always told that it helps compensate for the chassis flex on high horsepower drag cars.
sounds alot like cheating, like someone needs to enforce a rule book
@@rdejaynes it already is part of a rules book, drag cars are limited to 2 inches of stagger
Not gonna lie when I seen “Eagle update” I automatically thought of Leroy. Lol. I love hearing professionals talk about their craft. Cameron is awesome.
This man is the reason i'm building a race car. Thanks for the constant motivation, and getting us so fired up!
The month of freedom has me talking like cleet! Hell yeah brother!!!! I think I’ve said that no less than 100 times to friends this month
CLEET! Impressive skills, bro! Your team is something else. I know you’re taking good care of them. They CLEARLY are working their absolute tails off. WOW!
Your humor is on point, always puts a smile on my face!
I’m so excited for this build honestly
7:55 “In our shop, its an 11” 😂😂😂
Anyone else clenching their teeth or yelling “add the rod” while seeing that arc make an ever growing glowing spot with no movement of his left hand?
I can't even weld and I was starting to get worried! 😅
Cleetus,
You said there will be a shit-ton of foam on the seat. You should comoletely mock up the seat now, before finalizing the position of the steering column and ensure you have appropriate headroom with helmet, camera, etcetera.
I know you guys know what you're doing but just wanted to pass along my suggestion to do it once and do it right.
Looking good brother.
"this isn't the welder with the wire in it?" 😂😂😂😂😂😂
I knew it was coming right after that short got uploaded. All I can say is Hell Yeah Brother!
Cameron definitely knows his craft. Started following his channel because of you. This man knows what he is doing along with his guys. Glad to see this build being all in Florida. Mad respect to Cameron and crew there is Lakeland. Here in Minneola loving it.
Iv been excited for the solution for mullet steuggling to go faster for awhile so pumped
Big tire
buddy was being very generous on awarding you a 5.5 on the weld test.🤣
Between Eagle and Leroy's new body. Man oh man. Business is picking up.
Had neck surgery on the 25th so I'm in all the way we'll see who gets er done 1st , hoping it's me but these guys are jamming it out ,hell yea brother
👏 FINALLY him going against street outlaws, can't wait
Naming this Eagle & then getting Eagle body for Leroy might be confusing.
Not for the real fans, it's ok
Never thought about it being confusing.
That's Leroy, it just happens to have a eagle looking head, nobody will be confused, if they are it doesn't matter.
@@simpleman2004 not saying its a big deal but ya right bro,,, people ask daily what "do it for Dale" means & you say nobody will be confused. Ok bet!
Been watching you for like 8 years now, as a fellow giraffe ❤u cleeter
Nice to see Maddie's new daily is coming on nicely
Thos month of freedom has been the best one EVER!!
If the month of freedom doesn’t go on, I’ll cry 😭
I wish you coukd get that A pillar along the side of the windshield shorter and bring the roof down a couple/few inches to give it a little pep and style.
Eagle is going to have 3 gears, HERE, THERE, AND GONE. 🦅
Hell yeah brother!! Ignore the message about ignoring the message about extending the month of freedom!! 🤘🤘
I've been watching the Eagle build and i's been cool. it's the first time they ever built a race car for a giraffe
Sweetest camaro style of all, may God keep you safe in it!
I think the car should be called "Patriot" since Leroy is getting a body with an eagle shape. Either way looking forward to seeing the car put together.
There’s already a patriot small tire 1st gen camaro
Can only come up with so many names that aren't taken lol. But I hear ya
HELLLL YEAH BROTHER
Squirrel "In our shop, that's an 11" 😂😂
I remember is 2015 when you went to SEMA trying to get on the top 10 list 😂😂 now you actually have a promod. Hell yeah brother 🦅🇺🇸
Man i would LOVE to see eagle on a 20 inch wide asphalt roller of a tire or however big the promod cars ususaly run, It's time to make the step into the big boy shoes Cleet, you KNOW eagle is gonna go there eventualy to run them low 5s.
This build is going to be so sick. Car looks amazing
Use debt to attain assets that pay for that debt that simple. Smart move Cleet with the track btw you saved a piece of American racing history and brought it back to the Frontline of all racing
new T-Shirt idea. Picture of Eagle when its finished and "All Business" under it. 14:42 for reference
Man I love this channel so much I’m excited to see this new ripper I cannot explain how much this month of freedom has helped a brotha in need it’s been a damn long month
man, i'm hoping it goes white and piano black to match toter & trailer. It would look so slick.
love how hes like idk if were doing a turbo kit, than did a run down at the end and slipped up and said "turbo kit" LOL love that
The Eagles Debut will be a wonderful day.
Cleetus you better buy 2 motors for the new car, 25 runs. You will have half that amount on the car just getting it dialed in. You were having fun doing what you were doing, everything is going to change now GOOD LUCK
PLEASE do a clean and simple livery for this one 🙏🏼 I’m praying it end up blacked out 🙏🏼🙏🏼🙏🏼
Bring on the 5s brother!! Was pumped when I seen this update video, so sick!!
May is my birthday month and I couldn’t be more blessed to have this month of freedom
Sam is my Favorite . he always so happy.. that man is living his best life getting to play with all the toys.. watching Cleetus buy toys "old cars" when Sam seen them back in the day.. and now we buy and build old cars like it something new.. lol.
if you need to see your turbo from your drivers seat then maybe you could make a decal of one to place on the windshield
That thing is going to be a rocket ship!
Cleet & Squirrel are going to need to repo that thing here soon!
Would love to see this in a Bronze colour with the black wheels and you can put the freedom factory in mat black and eagle in mat black on the back on each quarter panel. Beautiful ride my brother. Let them bald eagles fly
You know Tye is confident in himself and his job when he’s happy other people are doing his work for him. Apprentice soon for Tye to mold maybe? 👀👀
another birthday with the month of freedom! thanks again cleet!
I cant wait to see that beast move on drag race, so insane good looking car
Car is absolutely amazing and CRC are on another level And I have seen a few of the race cars they built for customers when I was living in Florida Hernando Beach area/Spring Hill . And the handful of people that I know that had CRC build their cars have always come drag strip strip ready . Two of the cars got unloaded at Bradenton Motorsports Dragstrip and laid down 60ft times off the trailer with no adjustments needed and and they built a Mustang hatchback that was picked up and the same-day went to Bradenton And was able to make a shakedown pass that was also the last chance qualifier round and wasn't able to test N tune and went down and was fastest pass and put them at the number one qualifier and went on to get second round by run and he swung for the fences and went another PB on its second pass ever N ended up winning the event and 3 weeks later when to Macon Georgia and won the lights out event also. Can picked up with no time to test the car and still won the first event and less then a month later won lights out event with the same time used at Bradenton, and car was picked up fully done top to bottom.
Thank you, Thank you, Thank you for doing a hidden headlight
I can't wait to see this thing. its gonna be a BEAST.
I look forward to the title "The Eagle Has Landed" for the done vid.
Imagine if cleeter had a livestream in the shop one day so we can see the daily antics and goings on. Would also love a video from sam giving us a rundown of how to get a vehicle as clean and shiny as he gets them.
Amazing fabrication work there on the ol' Eagle!
I would also love the Month of Freedom to continue longer, but I also realize Cleet edits and uploads all of these videos himself and bro definitely needs a break 😂
It’s going to be a TT motor. Cleet, can’t say any other word, but “TURBOS”! I guess we’ll have to wait and see!
The body looks smooth, its going to be a gorgeous car
2024 The YEAR of Freedom!!!
It’s crazy how fast content moves, I feel like it wasn’t that long ago watching mullet get built
Cleet brother please show everyone when they pour your seat. It's going to flip people out. Also Ruby needs a blower
"In our shol it's an 11" F*ckin George!🤣
Tye had a look like "please don't embarrass us with this weld."
We need an update about the sand rail, jetboat from NZ and the dew boat
I can't wait to see this thing hit the track! This will definitely be a Sick Seconds level build, and coming from a UA-cam startup guy from 8 years ago, this is awesome.
The year of freedom! Better start stocking up on turbos for the give away!
I was screaming at my phone while Cleet was "welding". Poor chromoly won't ever be the same in that spot.
Yeah that was painful
You should really get belly air jacks installed on this. I'm excited to see the car run. It would be really awesome to see my idea on here as well! It'll be a bit tricky getting a jack under this
He’ll have projacks for it
We need a year of freedom
This car needs a name and I think you should call it the panther. Reason being is because that was general motor is original codename for the Camaro.
Pretty cool update on the car but wish Kevin was building it. Love his work.
Gotta love watching cleet step into some of THE MOST professional shops and just talkin trash
Man that's a beautiful unit, gonna miss the daily content when the month ends, May is always amazing!
Cleet could literally do anything he sets his mind to🇺🇸
Apart from welding...
I think you should be putting one of Mr Jackson's HoooCharger engines in Eagle !
Need to start over/under on how long before it’s torn/blown up. 3-6 months would be pretty good duration bet.
I would just like for cleeter to end the month of freedom on the fullest angle build but I trust in his channel decision making… just, whenever you’re ready… we are too…
Damn Cleet! Blew a hole right in that tubing 😂