"A master painter we see here, this is his "draw/slide" period. There are also masterpieces by him from the "french cleat" period, the "roll over", the "fold-unfold", the "catapult/rotate", "pvc tubes" and others, just to mention a few..." said the narrator in my ears. "Great museum" i thought to myself, "...and practical!" [not common for meseums The usual, you can't help yourself anymore! Bravo!
I've got an antique 5 level 10 drawer cabinet made in the mid 1920s which uses a double slide system on both sides of each drawer box. Eachdouble slide provides 2 glide paths, with an upper and lower glide path. That allows the drawer to completely exit the cabibet before dropping (saves the cabinet edges). The drawers have 2 metal pins on each side to guide it on movement. They pull out like your project, but each level has an increasing tilt angle (larger on higher levels) so you have approximately the same viewing angkes. I was fascinated by how they worked - all without any joinery, glue or metal except the drawer frame itself and the guide pins. As someone else mentioned here, definitely a Master. PS: where did you get the magic hammer? Amazon doesn't have it 😊
A couple weeks ago I got the Milwaukee M12 Fuel oscillating multitool kit. It came with a 2Ah and a 4Ah batteries plus a 3Ah battery on the side for free. It came to $179 Canadian. I just looked and they don't have that kit anymore. They only have the kit with the 4Ah but at the same price. I got it to remove the grout in the tiles in my shower. Worked well. I also have a Fein corded version that that is about 15 years old. I still like it but I'm not a big fan of cords on hand held tools. Nice job on the sliding rack for you oscillating tool. That's a great idea. I recently took your idea and style to make a shelf for batteries and chargers for my tools.
An oscillating tool is a very undervalued tool. It's not a hammer, you won't use it on everything, but the specific occasions that call for it, you're definitely glad that you have it. I love the project, Dekay, your creativity is always inspiring and makes me want to go build. Edit: One of the best situations I could recall using an oscillating tool was when I needed to change out a toilet kit where the nut and bolt were irrevocably attached on the furthest rear bolts of the toilet tank, the bolt had to be cut out. The bolt was so close to the wall, a grinder wouldn't fit and would be too imprecise, and I wasn't able to get leverage with hand tools because of the awkward position with surrounding cabinetry. With the oscillating tool and a metal cutting head I was able to cut through the rusted bolt without damaging the ceramic on the toilet or anything else. It turned something that would've been hours of misery into an easy to solve problem.
У вас потрясающие работы, просто дух захватывает от восторга, н вам просто необходима ленточная пила, с вашим умением вы ее можете сами сделать, но она вам облегчит вашу работу просто разы!
I have a Worx multitool, not a Stanley, but these are a few tools I found useful: There is a scraper (no teeth) to remove old glue; There also are blades to cut and sand tiles and stone. The semi-circular sawblade is good for plunge-cutting and longer cuts (not so easy to support it from the side with your fingers!) There even are blades for non-ferrous metals and even steel.
I use my oscillating saw for cutting hole in door for dog flap and cutting plastic and copper pipes. The metal blades are only for very light metals, nails and screws would wear the teeth down but also there is a girl on UA-cam shows an easy way to sharpen these blades. You can also use a special blade for it for clearing out old grout from tiles and a scraper blade for removing lino or for sticky things on floors. Great job. I would love to know how to make your shelf for my saw thanks
I had to cut through a lot of nails under a wall when removing rotten flooring. This was the tool to have. It is often my favorite tool. Many are unfamiliar with and are unsure of the tool. However, most become converts quickly when they see how easily it assists.
Vaše videá sú fantastické 👍💓 perfektná pedantná práca 👏 dokonale zorganizované fakt super 👍 pozdravujem zo Slovenska 🇸🇰 ďakujem veľmi pekne za inšpiráciu a prajem veľa tvorivých nápadov 😀
thats a really cool idea with the foam for your blades, I don't think I will build this for osilating tool but I think I will build it for some tools for my leather workings, thank you for all your cool ideas, sincerely deb in VT.USA
Hiya Dekay, may I say that you have exceptional skills already. Please could you tell me what glue you used on this project as it seems to be like a superglue that sticks and sets instantly. Dekay, please 🙏 keep up the great work me darling and you’ll find me watching your other videos. Great job 👏 😘
Magnífico trabajo , esos cajones articulados son muy prácticos , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
Milwaukee is still good, but the batteries are overpriced. Stanley has a good price range. And do 90% of what milwaukee can. And sometimes, milwaukee is hard available in a country.
I've used the oscillating tool to cut boxes out of sheetrock when renovating after a flood. I've also trimmed door frames to install vinyl plank flooring after contractors installed doors. Never had one until after the flood. Very useful tool. Love your pull out drawers. Going to steal the concept.
friend your works are sensational, very creative, i intend to try to make a chest of drawers you could have the project in pdf with all the measures to make it easier for us, but the design you made was very good. congratulation. Campinas/SP Brasil
You are quickly becoming one of my favorite woodcraft creators. Your mechanisms are simple and extremely functional. Great video once again! Also...love the copy/paste hammer 😉
Fine workmanship for sure. I do need to ask "why not traditional drawer?" I get that it's not as cool but in the shop function always comes before form.
You are right, because he put it in the wrong spot. But! This is a great modification for a drawer that is placed too high. Change the drawer to this so you don't need a step stool to access its contents.
I just notice. Your sander had doesn't have a mount for a vacuum cleaner. Mine did came with a mount for it and a extension. I don't know if it would be usefull. Might going to order a stanley vacuum soon too
I am really liking this pull out storage ideas. I’m going to make these and have my wife cut out labels on her cricut machine. Your engineering really comes out in what you do. Love your videos
![[SUB] Unique kinetic ideas!! Swing box storage l woodworking l mechanism](/img/n.gif)
"A master painter we see here, this is his "draw/slide" period. There are also masterpieces by him from the "french cleat" period, the "roll over", the "fold-unfold", the "catapult/rotate", "pvc tubes" and others, just to mention a few..." said the narrator in my ears.
"Great museum" i thought to myself, "...and practical!" [not common for meseums
The usual, you can't help yourself anymore! Bravo!
I love it! You used your brand new Oscillating Saw to make a storage drawer for………… your brand new Oscillating Saw!!!
I've got an antique 5 level 10 drawer cabinet made in the mid 1920s which uses a double slide system on both sides of each drawer box. Eachdouble slide provides 2 glide paths, with an upper and lower glide path. That allows the drawer to completely exit the cabibet before dropping (saves the cabinet edges). The drawers have 2 metal pins on each side to guide it on movement. They pull out like your project, but each level has an increasing tilt angle (larger on higher levels) so you have approximately the same viewing angkes. I was fascinated by how they worked - all without any joinery, glue or metal except the drawer frame itself and the guide pins. As someone else mentioned here, definitely a Master.
PS: where did you get the magic hammer? Amazon doesn't have it 😊
A couple weeks ago I got the Milwaukee M12 Fuel oscillating multitool kit. It came with a 2Ah and a 4Ah batteries plus a 3Ah battery on the side for free. It came to $179 Canadian. I just looked and they don't have that kit anymore. They only have the kit with the 4Ah but at the same price.
I got it to remove the grout in the tiles in my shower. Worked well. I also have a Fein corded version that that is about 15 years old. I still like it but I'm not a big fan of cords on hand held tools.
Nice job on the sliding rack for you oscillating tool. That's a great idea. I recently took your idea and style to make a shelf for batteries and chargers for my tools.
У хорошего Мастера все красиво продуктивно всё по делу Добра тебе желаю
Как всегда замечательно! Волшебный молоток из Асгарда! )))
제가 갖고 싶었던 장비들을 다 갖고 계시네요...목공 기술의 세계도 무궁무진하지요...귀한 영상을 보면서 꿈을 가져 봅니다.... 감사합니다...
An oscillating tool is a very undervalued tool. It's not a hammer, you won't use it on everything, but the specific occasions that call for it, you're definitely glad that you have it. I love the project, Dekay, your creativity is always inspiring and makes me want to go build. Edit: One of the best situations I could recall using an oscillating tool was when I needed to change out a toilet kit where the nut and bolt were irrevocably attached on the furthest rear bolts of the toilet tank, the bolt had to be cut out. The bolt was so close to the wall, a grinder wouldn't fit and would be too imprecise, and I wasn't able to get leverage with hand tools because of the awkward position with surrounding cabinetry. With the oscillating tool and a metal cutting head I was able to cut through the rusted bolt without damaging the ceramic on the toilet or anything else. It turned something that would've been hours of misery into an easy to solve problem.
Haha I so love your idea of the hammer! It makes de video shorter and funnier to watch.
I love these specific sliding drawers for the tools.
작품 잘 봤습니다. 개인 작업장이신가요? 너무 멋지네요. 저도 목공을 배우고 싶은데 많이 배워갑니다.
У вас потрясающие работы, просто дух захватывает от восторга, н вам просто необходима ленточная пила, с вашим умением вы ее можете сами сделать, но она вам облегчит вашу работу просто разы!
You are in the insanely brilliant business!!! Love your ideas.
супер !! вот это и называется- золотые руки !))
Your creativity is admirable
And having your modern tools is amazing👏👏👏👏👏
Glad you got sponsored!!
Very nice and ideal and under worktop is suitable and convenient for the worx saw
I have a Worx multitool, not a Stanley, but these are a few tools I found useful:
There is a scraper (no teeth) to remove old glue;
There also are blades to cut and sand tiles and stone.
The semi-circular sawblade is good for plunge-cutting and longer cuts (not so easy to support it from the side with your fingers!)
There even are blades for non-ferrous metals and even steel.
You are AWESOME. You should also put your plans able to be downloaded.
I use my oscillating saw for cutting hole in door for dog flap and cutting plastic and copper pipes. The metal blades are only for very light metals, nails and screws would wear the teeth down but also there is a girl on UA-cam shows an easy way to sharpen these blades. You can also use a special blade for it for clearing out old grout from tiles and a scraper blade for removing lino or for sticky things on floors. Great job. I would love to know how to make your shelf for my saw thanks
I had to cut through a lot of nails under a wall when removing rotten flooring. This was the tool to have.
It is often my favorite tool. Many are unfamiliar with and are unsure of the tool.
However, most become converts quickly when they see how easily it assists.
디월트 무선으로 하나 가지고 있는데 사 놓고서 이렇게 쓰면 된다는 걸 생각도 못하고 있었네요. 발상과 설계 능력이 정말 대단하십니다.
I have the same oscillating tool and I love it. It's handy for so many things
Your the best, awesome item for storing your new tool. Out of site and convenient place to hide the tools. Great job can`t wait for more like it.
Vaše videá sú fantastické 👍💓 perfektná pedantná práca 👏 dokonale zorganizované fakt super 👍 pozdravujem zo Slovenska 🇸🇰 ďakujem veľmi pekne za inšpiráciu a prajem veľa tvorivých nápadov 😀
As usual … perfect !!!
Its so neat you make convenient drawers now. It's really nice and clean wat to hide tools. Maybe you could make a double drawer soon
김팀장님 만세😍
Que gran video y GRACIAS por Compartir!!!
Clever design!
thats a really cool idea with the foam for your blades, I don't think I will build this for osilating tool but I think I will build it for some tools for my leather workings, thank you for all your cool ideas, sincerely deb in VT.USA
역시 독창적이네요, 다른 유튜버들은 대부분 뻔한 내용을 리뷰하는데 역시 Dekay님은 독창적이네요~
감사합니다:)
I've seen Prof. Lee perform similar feats on the Gunpla Lab channel. At this point I'm convinced all you Koreans are magical. 😆
How many times are you going to open and close and open and close that thing... I started to get a little uncomfortable.. Nicely done
금손이십니다!!!
멀티커터 다방면으로 편리하네요. 좋네요 😀
Hiya Dekay, may I say that you have exceptional skills already. Please could you tell me what glue you used on this project as it seems to be like a superglue that sticks and sets instantly. Dekay, please 🙏 keep up the great work me darling and you’ll find me watching your other videos. Great job 👏 😘
Magnífico trabajo , esos cajones articulados son muy prácticos , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 🤓 😜
I was a very good idea excellent use of space
I know you’ll find many good uses for your new tool, but I still really like that little hand saw I’ve seen you use!👍🏼☮️
우와.. 이거 엄청 편해보이네요...
당장 사러가야겠어요 🌟🌟
역시 갓성비 스탠리 하나 장만해야겠네요👍
Muy buen trabajo... Sencillamente eres un artista.
Great video, very meta to use the tool to make its own drawer. Nice design and fabrication on the build. Mahalo for sharing! : )
Great idea! Love the simple design!
Woooooow
Great idea and perfect Implementation.
Awesome presentation!
Frigg'n AWESOME man!!
that's a nice "oscillating" tool 😀
Such a great design!
Wow, Awesome
Be nice if it would work with the drills and their bits
Great! I‘ll rebuild these for my workbench!
Thank you for making the video informative and fun! Love the ctrl+c - ctrl+v 🤙
No more red tools? The organization in this shop is insane. Everything has its nice holder/storage
Milwaukee is still good, but the batteries are overpriced. Stanley has a good price range. And do 90% of what milwaukee can. And sometimes, milwaukee is hard available in a country.
@@Nigelsarmo is dewalt rebranded as stanley in korea?
I've used the oscillating tool to cut boxes out of sheetrock when renovating after a flood. I've also trimmed door frames to install vinyl plank flooring after contractors installed doors. Never had one until after the flood. Very useful tool. Love your pull out drawers. Going to steal the concept.
friend your works are sensational, very creative, i intend to try to make a chest of drawers you could have the project in pdf with all the measures to make it easier for us, but the design you made was very good. congratulation. Campinas/SP Brasil
Excellent
You are quickly becoming one of my favorite woodcraft creators. Your mechanisms are simple and extremely functional. Great video once again! Also...love the copy/paste hammer 😉
Awesome! Thanks
Love your workshop 🧡👍
Fine workmanship for sure. I do need to ask "why not traditional drawer?"
I get that it's not as cool but in the shop function always comes before form.
You are right, because he put it in the wrong spot. But! This is a great modification for a drawer that is placed too high. Change the drawer to this so you don't need a step stool to access its contents.
¡HOLA me gustó mucho el video Excelente! sos un CRACK!
muy buen proyecto. gracias por compartir
se ve perfecta la máquina. muy buena . saludos
I just notice. Your sander had doesn't have a mount for a vacuum cleaner. Mine did came with a mount for it and a extension. I don't know if it would be usefull. Might going to order a stanley vacuum soon too
GREAT JOB.
Those multitools are great, but a jigsaw would have been easier and come out cleaner.
As usual a really great idea
멀티툴 저도 참 많이 쓰는 도구인데 참 좋아요~
That's another good one.
Me encantó felicidades.
Always ecxited with his works...
Merci pour cette vidéo 👍🙏👍
very cool
You will need more places to hold the tool bits because they are so many different ones now days.
Too cool!
This is a fantastic review of the saw, and a great ad for the saw!
Great Job
I wann to See more
solid fan here👏
I absolutely love your work, and your videos. You have taught me a great deal and inspired me to do more in my own work. Thank you.
또 하나의 영감 감사합니다
고맙습니다 =)
very nice work..
simple and awesome 😄
This dude has his shit together so well
Good work 💙👍
이분은 천재임 ㅡㅇㅡ
고맙습니다ㅎㅎ
팀장님 센스는 역시 감탄사를 부르네요
Genius!
Great video as always. Thanks for it.
Nice!
I am really liking this pull out storage ideas. I’m going to make these and have my wife cut out labels on her cricut machine. Your engineering really comes out in what you do. Love your videos
Muy buenas ideas
Muy practico. Buen trabajo compañero.👍
I like it!
스탠리보다 광고 더 잘만드셨네요 ㅋ 멀티커터 별 필요성을 못느꼈는데 지름신이 오실려구합니다.ㅎ
nice work 🇵🇰
Very cool... Amazing👍😎
Great can make 1 set for me?
Can I just buy one or 2 of this pull down shelf pls & thanks??
저도 주문 했어요 👏👏
Amazing