i run a 348 . You were not feeding enough hay into it .the hay shold be just coming over the auger by the stufer fork . Pickup the hay at the outside of the pickup for an even feed and consistant bale . FEED THAT POOR BALER YOUR HURTING IT !!!
I've ran a 348 for 7 years after running NH for years. After you get it figured out the 348 is a great baler. As mentioned above, need to run thicker winrows or faster ground speed on the 348.
That‘s what I thpught as well. I worked with those balers a lot. You can hear it on the pickup! When you feed it properly it can make a lot of bales in a very short time. And the bales are much firmer as well!
I cant figure for the life of me how to adjust my 348 to make straight bales. If I put the auger forks in the middle like that it will come out looking like a banana.
I have owned both a JD 336 and a NH 575 and other NH’s. I prefer NH square balers. I also prefer JD round balers, except the 410. All were purchased new except the NH 77
Great video good luck baling your hay
Nice Tractor!
Thank you
I’d be fired if I ever baled hay that slow for our ARCUSIN D-14.
i run a 348 . You were not feeding enough hay into it .the hay shold be just coming over the auger by the stufer fork . Pickup the hay at the outside of the pickup for an even feed and consistant bale . FEED THAT POOR BALER YOUR HURTING IT !!!
full power
ua-cam.com/video/JdTLoPXO2VI/v-deo.html
I've ran a 348 for 7 years after running NH for years. After you get it figured out the 348 is a great baler. As mentioned above, need to run thicker winrows or faster ground speed on the 348.
That goes for both balers. Neither one are being fed enough hay. That new holland sounds like the hay dog cushions are worn out.
That‘s what I thpught as well. I worked with those balers a lot. You can hear it on the pickup! When you feed it properly it can make a lot of bales in a very short time. And the bales are much firmer as well!
Muy buen equipo . Para que es el tanque con liquido?.
Great vid. This is the first time I ever saw a chemical tank on a baylor. What is up with that?
I cant figure for the life of me how to adjust my 348 to make straight bales. If I put the auger forks in the middle like that it will come out looking like a banana.
what does the liquid do to the hay?
what is this tank in the back of baler ?
The tank if for the propionic hay preservative. We use this when the hay is over 13 moisture. (when the hay is wet)
Что за пропионовый состав что в него входит? Покажите как работает механизм.
Es para humedad del heno.
Cool vid lad
Well what you think of the JD baler??
NH or JD best ?? 🤔🤔
NH is heavy duty, a lot stronger than JD. However the NH is newer by a couple years and the JD is always reliable as we had 2 before our new hollands.
I would say NH for our operation. JD still is great but we need a heavier bailer. (We like our Jd combine 9550 and 25 foot drill)
@@zuccaribrosfarm4443 interesting 🤔
yes I was thinking the same too, as I’m a NH / MF man
Thanks for the information
🤙🤙👍👍
Your welcome
I have owned both a JD 336 and a NH 575 and other NH’s. I prefer NH square balers. I also prefer JD round balers, except the 410. All were purchased new except the NH 77
why did flywheel not turn smoothly
Джондиъра 6+
Hay baler