GroundControl to WebControl on Raspberry Pi Migration for Maslow CNC
Вставка
- Опубліковано 10 лип 2024
- 0:00 Intro
0:25 Downloading Raspbian: www.raspberrypi.org/downloads...
0:37 Downloading Win32 Disk Imager: sourceforge.net/projects/win3... (Note: use your choice of disk imager if you do not use Windows.)
0:47 Downloading PuTTY: www.chiark.greenend.org.uk/~s... (Note: use your choice of SSH client if you do not use Windows.)
1:07 Unzipping Raspbian
1:15 Installing Win32 Disk Imager
1:25 Writing the image
1:55 Remove and re-insert the MicroSD card
2:08 Create an empty file on the boot partition called ssh
2:19 Eject MicroSD card, install in Raspberry Pi, plug in and turn on
2:31 Find out IP address of Raspberry Pi
3:24 SSH
3:34 Change default password
3:46 sudo raspi-config to enable wifi and change hostname
4:08 Install WebControl: github.com/madgrizzle/WebCont...
4:51 Set up WebControl as a service
5:24 Find out new IP of Raspberry Pi
5:44 Correct webcontrol.service
6:33 Reboot and see if it auto-starts.
6:55 Configuration
7:55 Test
I finished my Maslow build this morning and came across this video. After a little tinkering i have my old Raspberry Pi up and working. Thank you so much for the Video!!!!!
I'm happy to help, and I wish you happy building!
I've had Webcontrol loaded on a Pi3 for 9 months, mounted to the back of my Maslow ,and never migrated over because I couldn't get it to acquire my maslow automatically. This took me 4 minutes and I'm finally using my maslow wirelessly! Thanks!
This video was immensely helpful in setting up our RasPi and transitioning over -- very clear!
Great video. This helped me a lot.
Nice!
Thank you, good sir! I've watched and very much appreciated plenty of your videos, including the Meticulous Z-Axis one several times.
@@grahambuildsstuff87 Thank you! Keep making!
So if i understand correctly, I can skip most of the setup if I simply want to add a monitor and keyboard? My shop is in my garage and unfortunately its a detached garage and the Wifi doesn't reach that far but I do have a spare monitor and Raspberry pi laying around.
Doesnt work anymore? It fails to start :/ is there a discord i can join and ask questions this is not working any more :(
Amazing I would like to set myself up with my M2 and Makerverse It would be inserting to see if it could work ?
WebControl doesn't work with M2; only Maslow.