200 Series Landcruiser Roof Rack Install | Rhino Rack Pioneer Platform and Backbone Install LC200
Вставка
- Опубліковано 19 жов 2024
- A detailed look at how to install the Rhino Rack Pioneer Platform Rack and Backbone system to a 200 Series Landcruiser.
Install requires:
JB1363- 2128mm x 1236mm Pioneer Platform rack
RLTB1 Backbone for 200 serier landcruiser
B014-BP T Bolts included in SP309 kit
"Installation requires SP309 T-bolt kit to attach 52 Series Pioneer Platform to Backbone"
Instruction Links:
assets.rhinora...
assets.rhinora...
assets.rhinora...
Installation equipment Web links:
www.rhinorack....
www.rhinorack....
www.rhinorack....
Disclaimer: The information contained herein should NOT be used as a substitute for the advice of an appropriately qualified and licensed professional. The information provided here is for information and demonstration purposes only. Please seek additional information and advice before attempting any installation. Border Touring take no responsibility for the use of their material for any installation of any product.
Great video and very helpful. The backbone now comes with the SP309 kit included.
Good to hear, they should do this for all their backbone models
They also now include an Allen Key as you described worked best. Great video, well done mate thanks for sharing.
👍
Awesome video mate. Thanks very much. Autobarn were trying to tell me they needed to drill into my roof and use rivets ffs! This has cleared that up and I will install myself. Cheers
Glad we could help. Better to do it yourself if that's what they are saying. Landcruisers are built for these type of installs so no need to drill into them.
We have lots of install videos on our channel with lots more coming so hopefully we can help some more.
EXCELLENT Mate. Thank you
Really good tute thanks. Deserves to monetise. I probably would have given the job to autobarn without this vid
Thanks Lats, glad we could help. Hopefully we can get a few more videos out to help with other things we install.
Thanks lad, saved me hours.
No problem, more videos to come hopefully that help out
Great install video! How has the wind noise been with this rack?
" Very Helpful Video ! .... Thank-You !! "
Great video, mate. You mentioned that you wanted to attach your awning brackets underneath. Is it possible? I don't see where there's space.
Yep I fitted my awning from the top facing down. I used the rhino rack L bracket and also use the iron man quick removal attachment too. Message me on Facebook and I'll send some photos if you like. Just search Border Touring
For those viewers with a Sahara or VX with a sunroof do these racks allow the sunroof to still be opened ?
I noticed that you still have rubber mouldings in the roof ditch. Wouldn't water pool in those mounting areas they they can't run off the to the sides of the car when it rains?
No pooling, it runs through and along the gutters. Still going strong
I plan to install one of these but was going to use the feet instead of the backbone as I see it would be almost impossible to clean your roof with the backbone in place
Scott, not a bad idea. If you clean the roof from the top it's not too bad but the side is easier. The process is still the same however you might put the legs on the platform first then load it onto the roof. Just be careful of the clips in the roof. Good luck, any issues let us know
Shouldn't you put silicon down the bolt holes to stop water ingress?
You can if you wish. The kit comes with some rubber stickies that seal the roof to the backbone. These have sealed our roof extremely well and there is no need to silicon everything up. I would however use silicon or purchase the rubber stickies if I was installing a second hand rack.
Can confirm that re setting the bolt eyelets in the roof if you knock them out is a complete and utter bloody nightmare to re seat. Be patient and careful fellas!!!
Would it still fit inside the garage. Is this gonna be taller than the oem rack?
It is slightly higher than the OEM rails. With a 2 inch lift (OME BP-51) it fits in our 2.2m garage if that helps
Steel or aluminum?
Aluminium
do you have audi grill and bumper?
No standard Toyota
@@bordertouring3265 thanks,where are you?USA?
Australia
The Chanel nuts Rhino Rack gives you is a disaster! I wish I would have known about the ones you used because after 4 hours of trying to set them in the rail, I gave up and took it to a shop. 🤦🏽♂️🤬
100% agree. No idea why they don't make it clear you need a different kit to mount it. It should come with the backbone
@@bordertouring3265 Getting the Chanel nut to lift theme turn to sit on the inside lip, forget about it. I WISH you would have done this prior to me buying and trying to install mine.
@@bordertouring3265 Can you please tell me where you bought the better Chanel nuts from? Name and size? Did you also use different screws/bolts?
SP-309 kit? Is that correct?
@@spalacios9058 you just need to get the SP-309 kit from a rhino rack dealer or franchise like ARB, Autobarn, Supercheap Auto etc. I couldn't find them online though.
If you get stuck get the B222-BP T Bolt kit (20mm bolt 40mm plate) and some nyloc nuts, spring washers and washers. You will need 6 for the rack
Very good rack but bloody noisy, not good enough Rhino.
Read a comment that it is noisy, true?
The short answer is Yes. The 200 series stock is super quiet however add bullbar, snorkel, tyres and roof rack it gets loud.
I plan to put a light bar or wind deflector to lower the noise. If you get annoyed by wind noise avoid this rack I'd say though.
Border Touring Thanks Mate, I'll just turn the radio up a bit