You two sitting in the badly adjusted seats, driving a car with no windshield instantly made me think you were Steve Martin and John Candy in Planes, Trains and Automobiles!
Not to mention the glass shards blowing around, and not even knowing if the brakes are going to stop the car.. Looks more like a... "Hold My Beer" moment. Lol
No one wants to watch videos of cars being parted out that's why channels like JJ auto wrecking has few views/subscribers etc and they are the biggest in a niche no one cares about.
You all should drive the Corvette to the Bowling Green Kentucky Corvette Museum and park on the grass out front!! "Hey man, I need some parts, you got some?!" LOL
Used retail price for a 2002 Z-06; $16,600 - $21,600 So at 4 grand JR got a great deal. Window glass; $1000, Seats; $500, Tune; $250. So with a total of $1750.00 he'll have a running and driving Corvette, seems like a killer deal to me.
The whole interior is garbage, tho. As is the bodywork and paint. And with 12 owners, the engine and tranny and brakes are super abused. That thing has been launched hundreds of times, no doubt. It's a dead man walking.
Even with a good used interior from an junked Corvette, say 750 bucks, he's still under 7,000 dollars compared to a good used Z06 at 16000 dollars. @@TheJohn8765
You don’t need the special hud windshield to see the hud . I had a 2001 z06 that didn’t come with a hud and installed a hud with the non hud windshield that came with the car and it was fine. Lots of guys with c5 s that did not come with hud installed hud with the non hud windshield and it was fine. Good luck
It's really up to the individual as to how much a blurry image bothers them. If you look at your display close, you will notice two slightly offset images. That is the difference in the special windshield. On a normal one the inside and outside of the glass are relatively parallel resulting in offset images. The special ones focus it to one image. Now if it is worth the difference in cost for most people? I would guess probably not. I believe the magnitude of offset can vary with the shape of the windshield, so some cars may be worse than others. I have a HUD in a 2000 SSEi. I broke my HUD windshield, ironically removing the HUD module. :-) I thought I had glass coverage, but I didn't so I ended up using a spare non HUD windshield that I had laying around and was saving. The difference is quite noticeable. It is usable as you can make out the speed well enough and that is all I really want it for. The smaller icons are a bit blurry though. I would prefer a HUD windshield, but that will have to wait until it breaks again as I have glass coverage on it now.
It's certainlhy makes a nice sound! Watching you during those frosty pulls reminded me of that old "blown away" Maxell tape commercial with the guy sitting in front of a JBL L100 speaker.
While you’re waiting to have the transmission rebuilt, you can double-clutch into the gears with the bad synchros. Depress the clutch- shift into neutral- release the clutch- depress the clutch- shift into the next gear.
Save the car for when you don't have any other content you see you can always bring this back up and do something on it and we're going to watch it and we're going to be really cool about it because as you improve this car we is your followers are you know we're going to feel like we're part of this you know make us part of this As you move forward with this project just invite us along
Those are easy to bypass. You can find a chart online with the 15 different values of resistance. Then get a potentiometer and an ohmmeter and try each value. Have to wait 10 minutes between each try. When you find the value, solder in a fixed resistor. I have done this on a GM TPI swap.
I’m reposting this comment in hopes that you’ll see it, JR. There’s a work-around for bad synchros. I know it works because I’ve used it myself before. When shifting into the gears with bad synchros here’s what you do…. Depress the clutch- shift from prior gear into neutral- release the clutch- depress the clutch again- shift into gear with bad synchros- release the clutch. Doing this helps the gears mesh better, prevents grinding and with practice, you’ll get damn quick at it. I know I did. I had an 88 Mustang LX 5.0 SSP. A friend of mine had one before me and after me and all 3 cars had bad 2nd gear synchros. I learned double-clutching from my friend.
What is it about the roar of an engine that makes a grown man smile and scream like a child in a candy store? I really don’t know, but I absolutely love it.🎉
You don't have to use the HUD glass. I've installed HUD in 2 early 2001 z06s that never had it and it works fine without the special glass. Can see it in direct sunlight fine. I'm sure it's better with HUD glass but not necessary.
It looked like the idle issue healed itself based on the last start just before the end. I'd think 950 rpm would be an okay idle for a manual car. Perhaps a smidge high.
@WatchJRGo I might be completely wrong and if so please disregard, maybe someone in the comments might know better. But would you be able to buy some Head up Display film from an aftermarket HUD system and use that instead of getting the OEM windshield from GM to work with the cars HUD system?
I just have to wonder, at what point in this cars life did it go from being someone dream car, to just getting completely roached? My C5 has nearly double the miles, and is in 'near' mint condition. It has a few paint chips, and the leather looks like you would expect for 200k and 20 years, but it's still my baby.
Great deal JR. Replace the glass, polish the paint, and replace those seats. Not sure about swapping the whole interior or just the buy correct front seats. Sure is loud ! Is the the same model Jake has?
It's time to look at the Gt8 by DDR motorsports. You can use that car to build one. They might even make you a deal if you turn it into a build series.
A half a dozen repairs and she can run with the big dogs. Where are you going to find a running & driving 2002 Corvette at 4000 dollars? not many places for sure.
That thing sounds great! Looks like it would be a fun cheap hotrod after fixing all of the little issues, glass, seats, lights, headliner, tune, clean it up inside and out.
Educational and entertaining. All said, the car hobby is a leap of faith. Believing it can be done. What a tangled web of BS to climb through the steps of getting the PCM to talk to the key and get it it to fire. This thing with some paint correction, glass and rebuilt trans would be the perfect track rat. Beat the hell out of it at the track until it breaks, fix it and beat it some more.
Smiles per mile were amazing, I am sure it was a great feeling getting that started and taking a ride. I hope you build it unless some one gives you an offer now as is.
Make it an Eric build!🎉. Also, they make plastic razor blades that work really well for scraping without damaging the finish. Might want to give them a try.
I have a question I see the ignition says pool key wait 10 seconds. I’m having that problem with mine. It stays column lock. I did the bypass for the mod but still get message.
Your other issue for resale value is the seats, I know Corvette aftermarket seats are expensive, and OE seats are old and might be a little worn out, but would work if you just wanted to clean the interior, exterior, fix the glass and the other obvious problems, and sell it in a year for maybe $7-8K as a beater Z06.
If I remember correctly for VATS, if you know the resistance value you can just interrupt the VATS wire in the steering column with the same value resistor and bypass it.
As a side note those inputs the positive and negative ones that you screwed that you can overturn those very very easily and then you basically have just loosen you don't want to do that so kind of like hold back like if you're going to go to that next turn just do the quarter don't try to like go over it because then you'll end up stripping it and because it's only made out of lead why they did that I don't understand that screw is metal that battery input is LED and it's like soft
You two sitting in the badly adjusted seats, driving a car with no windshield instantly made me think you were Steve Martin and John Candy in Planes, Trains and Automobiles!
Sir, do you think this car is safe to be on the road. Yes, yes I do. lol Great movie
Not to mention the glass shards blowing around, and not even knowing if the brakes are going to stop the car.. Looks more like a... "Hold My Beer" moment. Lol
Awesome movie….where are your hands? Between 2 pillows….those aren’t pillows. Hahhahahaaa. Loved it
This car is cooperating so much with you, please save it, dont scrap this one
It Sounds amazing
Yes, please throw 20k into it.
Whatever is gonna make him money. He already said that saving most cars on the channel usually isn’t beneficial
@@vadim7590just needs glass, junkyard seats, and a few minor things. You could have a nice car for less than $2000 more.
Please fix it
Keep going with this one John Ross. This is one of the more interesting builds you’ve worked on lately. Thank you.
Vandalized Z06 . $4,000
DJs Lock & Keys. $70
First rip in vandalized Z06… PRICELESS!
😂👏💪
It’s in your blood JR. You may still do a little salvage work but you’re back at fixing up hoopties.
Yeah luv this trash content
No one wants to watch videos of cars being parted out that's why channels like JJ auto wrecking has few views/subscribers etc and they are the biggest in a niche no one cares about.
You'll just GOT to build this one up, nice & cherry restoration.
Repaint mint blue, coilovers, massive wing. Track weapon
LMAO, no they wont they will just flip it.
Maybe that ground wire on the BCM has something to do with your light problem that would explain why it was there if so
Dang… that was FAST! Looking forward to seeing how it’s completely restored.
Holy shoot batman do a wrap on it
Doesn't this just hsve chevys notoriously inefficient and dated 5.7 in it..... slow af
You all should drive the Corvette to the Bowling Green Kentucky Corvette Museum and park on the grass out front!! "Hey man, I need some parts, you got some?!" LOL
I was smiling the entire time you were driving it. Your enthusiasm is infectious.
I didn't realize Mexico got that cold? You did do this test drive in Mexico, right?🤣
Man, I would have killed to find this deal. Such a fun car to rebuild.
Idk if fun is the word I would use...🤔 maybe interesting...
Used retail price for a 2002 Z-06; $16,600 - $21,600 So at 4 grand JR got a great deal. Window glass; $1000, Seats; $500, Tune; $250. So with a total of $1750.00 he'll have a running and driving Corvette, seems like a killer deal to me.
The whole interior is garbage, tho. As is the bodywork and paint. And with 12 owners, the engine and tranny and brakes are super abused. That thing has been launched hundreds of times, no doubt. It's a dead man walking.
Even with a good used interior from an junked Corvette, say 750 bucks, he's still under 7,000 dollars compared to a good used Z06 at 16000 dollars. @@TheJohn8765
You don’t need the special hud windshield to see the hud . I had a 2001 z06 that didn’t come with a hud and installed a hud with the non hud windshield that came with the car and it was fine. Lots of guys with c5 s that did not come with hud installed hud with the non hud windshield and it was fine. Good luck
It's really up to the individual as to how much a blurry image bothers them. If you look at your display close, you will notice two slightly offset images. That is the difference in the special windshield. On a normal one the inside and outside of the glass are relatively parallel resulting in offset images. The special ones focus it to one image.
Now if it is worth the difference in cost for most people? I would guess probably not. I believe the magnitude of offset can vary with the shape of the windshield, so some cars may be worse than others.
I have a HUD in a 2000 SSEi. I broke my HUD windshield, ironically removing the HUD module. :-)
I thought I had glass coverage, but I didn't so I ended up using a spare non HUD windshield that I had laying around and was saving. The difference is quite noticeable. It is usable as you can make out the speed well enough and that is all I really want it for. The smaller icons are a bit blurry though. I would prefer a HUD windshield, but that will have to wait until it breaks again as I have glass coverage on it now.
Afterthought: It would help be not as bothersome if you've never seen the focused image I suppose.
It's certainlhy makes a nice sound! Watching you during those frosty pulls reminded me of that old "blown away" Maxell tape commercial with the guy sitting in front of a JBL L100 speaker.
How many of his viewers even remember that commercial and print ad?
@@avioncamper I know I sure do, used to use their cassettes 💯
@avioncamper anyone older than 30 should know it.
@@herbiehusker1889 At 57, I better :)
Is it live???? Or Memorex??¿?
While you’re waiting to have the transmission rebuilt, you can double-clutch into the gears with the bad synchros.
Depress the clutch- shift into neutral- release the clutch- depress the clutch- shift into the next gear.
The best series in a long time. Save it. I want to see more!!
Like two boys in a candy store. Dad can we keep the puppy? 😂 I love it
Better than a sinkhole Corvette from the museum!!!!!!!
Save the car for when you don't have any other content you see you can always bring this back up and do something on it and we're going to watch it and we're going to be really cool about it because as you improve this car we is your followers are you know we're going to feel like we're part of this you know make us part of this As you move forward with this project just invite us along
Those are easy to bypass. You can find a chart online with the 15 different values of resistance. Then get a potentiometer and an ohmmeter and try each value. Have to wait 10 minutes between each try. When you find the value, solder in a fixed resistor. I have done this on a GM TPI swap.
please SAVE IT is a good car and sound really nice love your channel
It wants to run! Best episode on the channel in a while! Love it!
Better than goooooonzsquads
I’m reposting this comment in hopes that you’ll see it, JR. There’s a work-around for bad synchros. I know it works because I’ve used it myself before.
When shifting into the gears with bad synchros here’s what you do….
Depress the clutch- shift from prior gear into neutral- release the clutch- depress the clutch again- shift into gear with bad synchros- release the clutch.
Doing this helps the gears mesh better, prevents grinding and with practice, you’ll get damn quick at it. I know I did.
I had an 88 Mustang LX 5.0 SSP. A friend of mine had one before me and after me and all 3 cars had bad 2nd gear synchros. I learned double-clutching from my friend.
What is it about the roar of an engine that makes a grown man smile and scream like a child in a candy store? I really don’t know, but I absolutely love it.🎉
You don't have to use the HUD glass. I've installed HUD in 2 early 2001 z06s that never had it and it works fine without the special glass. Can see it in direct sunlight fine. I'm sure it's better with HUD glass but not necessary.
This is the perfect level of build / cadence 2ish days a week for a month. Every man pocket lint rocket.
Too Cool from Central Florida,,way to go,an old Vette owner,,old Wichita guy,,,,
Great project- please follow-thru and finish this nice
It looked like the idle issue healed itself based on the last start just before the end. I'd think 950 rpm would be an okay idle for a manual car. Perhaps a smidge high.
Nothing beats a test drive in Mexico!
Won't rubbing alcohol take off the house paint? Or mineral spirits?
@WatchJRGo I might be completely wrong and if so please disregard, maybe someone in the comments might know better. But would you be able to buy some Head up Display film from an aftermarket HUD system and use that instead of getting the OEM windshield from GM to work with the cars HUD system?
I STILL say that Oreilly's needs to sponsor you as you go there so often giving them free advertisement in your videos lol
good project car for the channel and its not a boring car, I'd like to see what you guys can do with it maybe mod it? Would be a good series imo
I just have to wonder, at what point in this cars life did it go from being someone dream car, to just getting completely roached? My C5 has nearly double the miles, and is in 'near' mint condition. It has a few paint chips, and the leather looks like you would expect for 200k and 20 years, but it's still my baby.
tan interior would look killer cool , black interiors are to hot anyway
It sounds so good! Excellent score!
OMG...you two taking that thing out for a drive had me belly laughing. Just a couple of big kids!!😂
Great deal JR. Replace the glass, polish the paint, and replace those seats. Not sure about swapping the whole interior or just the buy correct front seats. Sure is loud ! Is the the same model Jake has?
Whoever owned this car before you did absolutely EVERYTHING you should never do to a car.
For that price and as well as it runs, I agree with eric and you should fix and keep it for a while.
nice beater Z06
I knew this was going to be fun! Keep up the videos on the yellow - black - blue Corvette. We love it.
It's time to look at the Gt8 by DDR motorsports. You can use that car to build one. They might even make you a deal if you turn it into a build series.
A half a dozen repairs and she can run with the big dogs. Where are you going to find a running & driving 2002 Corvette at 4000 dollars? not many places for sure.
Definitely not
JR! This brought a smile to my face!!! Happy moments!!
OMG you just took me back 35 years with that drive. My favorite channel by far
That C5 is so cool please don’t tear it apart and scrap it
Standard Windshield Glass will work with the Heads Up no problem .I added HUD to a 2002 I had with standard Windshield and it worked fine.
That Corvette is going back to your grass roots of you channel. Awesome purchase
Man this video was amazing JR, when is first started to the first test drive, I was smiling and laughing my azz off lol!!
How's the house remodel coming along?
Fav project I’ve seen in a longggggggggggggggggg time. I’d ditch the hud. Also I’d dyno it and tune it asap
Drive it like you stole. It.....
That thing sounds great! Looks like it would be a fun cheap hotrod after fixing all of the little issues, glass, seats, lights, headliner, tune, clean it up inside and out.
Keep going with it. Resurrect this one.
Educational and entertaining. All said, the car hobby is a leap of faith. Believing it can be done. What a tangled web of BS to climb through the steps of getting the PCM to talk to the key and get it it to fire.
This thing with some paint correction, glass and rebuilt trans would be the perfect track rat. Beat the hell out of it at the track until it breaks, fix it and beat it some more.
I will watch every video related to this car made by you, several times each. Please. 🙌🏻
Smiles per mile were amazing, I am sure it was a great feeling getting that started and taking a ride. I hope you build it unless some one gives you an offer now as is.
I was crying watching you test drive. 😂. It reminded me of pictures of speed tests on the salt flats.
Great fun.
Eric is going to love love love his new car!
Man - that car sounds MEAN!!
That was one terrific series. Congratulations, Corvette whisperer.
Make it an Eric build!🎉. Also, they make plastic razor blades that work really well for scraping without damaging the finish. Might want to give them a try.
To Quote those most wise philosophers Bill & Ted, “EXCELLENT”.
You've nailed "your look" at 14:28 dude. I'm not even kidding - dress like that all the time.
I have two c5 Z cars, and the windshield cracked on one, and I just had the plain non HUD glass put back in it, and you can still see the HUD perfect.
Good information to know.
I have a question I see the ignition says pool key wait 10 seconds. I’m having that problem with mine. It stays column lock. I did the bypass for the mod but still get message.
FYI those door window seals are NLA from GM the last time I checked. Repros are out there but I haven't read any good reviews.
JR has his own definition of fixed.
Practically mint **car guys creating justifications to keep a junk car**
Awe man, that's bad ass. Good find bro. The chick that beat the hell out of that car is fuming right now. Her competition lives on.
Great drive. Felt so much like I was in the cockpit with you guys I had to put on a hoodie!
Your other issue for resale value is the seats, I know Corvette aftermarket seats are expensive, and OE seats are old and might be a little worn out, but would work if you just wanted to clean the interior, exterior, fix the glass and the other obvious problems, and sell it in a year for maybe $7-8K as a beater Z06.
I'll bet you could use one of those stick on display tape stuff from a set of obd2 Chinese gauges to have the HUD work on a standard glass.
I had a Pilkington non-HUD windshield in a C5 years ago and it was no issue.
Hardcore driving experience! Solid content , I am looking forward to the repairs.🎉
That's so awesome! You're videos are great again! Please save it!
Make sure to rock the motor back and forth while watching your distributor to check for timing chain slack.
You know a battery means business when it says EXTREME!!!
I’m impressed by a man who has extra BCM,s. 😊
Couple of cheap needlenose vice grips do wonders on the side terminal batteries itallows you to jump them really easy
This is the content i subscribed for.
If I remember correctly for VATS, if you know the resistance value you can just interrupt the VATS wire in the steering column with the same value resistor and bypass it.
Hey good morning from Philippines here for the winter! What about the ford focus transmission update? Keep up the great job enjoy your vids
$4k........save this beast! We all need a sick build series
I definitely think its worth saving the car. Fun to watch!
now that its running, are you gonna do offroad vette 2: electric boogaloo?
Definitely deserves a long term restoration project!
She's saying save me and give me a makeover. - Great car and what a sound. Also let's not forget it's a Z06 C5, 😁
Lee C just got in a Blue with black interior C5 Z06. Check with him on interior parts and back glass
Sounds Awesome!! Are your eyeballs frozen??
Personally, I'd have myself one badass track car. For 4 grand, and probably 4 grand more to get it sorted, you'd have one badass ripper
cool video jr…… i think you should keep it awhile and make some videos on it. It can’t hurt and that motor sounds very healthy!👍🏿😂
JR driving with the lean back seat; priceless !!!
As a side note those inputs the positive and negative ones that you screwed that you can overturn those very very easily and then you basically have just loosen you don't want to do that so kind of like hold back like if you're going to go to that next turn just do the quarter don't try to like go over it because then you'll end up stripping it and because it's only made out of lead why they did that I don't understand that screw is metal that battery input is LED and it's like soft
After your done messing with it how much are you going to ask for it.? I'm interested
Hot Damn.....That engine purrs like a lion.
Great pick up.
When are you going back to Rich rebuilt