No one could have done this video any better. Julie has a great voice for the instructions, spoke slowly, showed all steps up close so I could see what she was pushing on the screens, and simplified the instructions so I could understand what she was doing. I will watch this over and over again till I can remember how to do this. These two features (adding designs and stippling around designs) were the determining factors in me buying the Dream Machine. I WOULD NOT TRADE THIS MACHINE. Thanks Brother !!!!
What a great video. You explained every thing better than I have seen before. Hope to find and watch more of your videos. This is one of the best I've seen. Thanks.
Thank you. I love the way you explain each step and at a speed most people could follow. I have been having trouble stippling around Sleeping Beauty on my Luminaire XP1. I had already taken it off the hoop, but after pressing it I got more puckers and I thought stippling would cover them. I scanned it in, after reattaching in the hoop. I tried so many times with no success, I think I was getting more confused each time I tried something different. I see now why I had a shadow of the scan underneath. I am new to the Luminnaire XP1 and have got both upgrades. I am going to watch your video again step by step and hopefully I will be successful!!! Thank you very much for time taken in making this video.xx
I hope everything worked out. Puckers generally happen when there is not enough stabilization. One thing that helps is if you know you can wash the fabric after stitching, then I would definitely use a Tacky Wash Away Adhesive on top..I use the Floriani Wet-n-Gone Tacky. The Realign Design P1-P3 should be helpful in realigning the design in the hoop. I also own an XP1 and love it. Let me know if you need any other help.
Thanks Julie! Your video really helped a lot. It’s interesting to know both ways to add stippling. And this was my first venture into the Design Center. Thanks again!
I want to thank you for this video. I tried for about 2 hours today to make a stamp and then add stippling. This video was what finally helped. I have been watching too many Luminaire vids and I don’t have one😥
Thank you Dot...I have been in the middle of a renovation and haven't had access to my machine, so I went and bought a Luminaire. :) I'm actually thinking of filming a comparison video.
Julie Murphy - Dream Machine oh no, lost another great teacher to the Luminaire. Just don’t know if I can justify it at age 75. It’s the first time I haven’t upgraded when the new machine came out. My dealer didn’t want to do trades for Dreams that had over 3,000,000 stitches. Mine has about 6,000,000😂
@@dotzig Hi Dot, I kept both machines and will still be filming videos on the Dream...I'm just ready to get through our renovation and start filming again.
Hi Julie! Have you ever considered moving to Regina, Saskatchewan, Canada? I’d love to have you as my neighbour!! I love your videos. You explain things so well. My only question right now is, if I was to do a quilt (which I’m no where’s near attempting), how would I do the stippling throughout the entire quilt? Obviously the rectangle on the machine isn’t the size of the quilt. I hope you can help! I look forward to more of your videos. I’m not good at reading manuals. I get all mixed up.
Congratulations on possibly purchasing the Stellaire XE1. I haven't worked with the Stellaire, but I purchased the Luminaire and it is very similar to my Dream Machine and my Destiny. Because they are all made by the same company, I would think most of the icons and buttons would be very similar. Can't wait to hear what you think when you get your new machine.
@@JulieMurphyDreamMachine thanks for the reply. Well.... I bought the Stellaire XE1... AND I LOVE IT! It is absolutely amazing... a joy to use. I've been considering starting a UA-cam channel to share videos because theres so little about it online, but am just enjoying using at the moment. It's so fast!
Thank you Julie. I was not very successful but getting there! It took me some time following your instructions to get a result. (Me not your instructions).Although I managed to get the stippling with outline only of sleeping beauty, I could still see the design underneath when using the camera. I tried to turn off background in settings but it was greyed out. Is there a way of resetting it. In the end I just started to stipple to see what would happen as I had already scanned in the stitching.At first It was okay but then the stippling tried to stitch over the embroidery I had sewn. When I could see that happening I went forward stitches to avoid it. Because of the ghost outline it was stitching in wrong place. It will only be a practice piece. I also think when I took it off machine I noticed I had not rehooped it centrally and because I could not turn off background. In a way I was not too disappointed because I at least got as far as learning how to just have stippling around outline only,thanks to you. Thank you for your advice about stabilizer. Any advice how to reset background button. Thank you for helping me. I am not sure if I explained it well, I feel a bit stupid but hopefully I will get there. So much to learn on the Luminaire. Can I ask what the realign P1-P3 are. Thank you
foreverwestlife1 I’m sorry you are still struggling..The Realign P1-P3 are a series of videos I did that help you realign a design in the hoop when you have something go wrong and need to realign your design when you are partway through stitching. Also, I am not sure I understand where you are having trouble with the design underneath...there is a button that you can press on the screen that will remove the scanned image...let me check the videos and see if I can find the one I talk about it.... found it I talk about the button I think you are talking about in the Project Pumpkin video Part 1 at about the 2 minute mark. Let me know if that is what you mean about seeing the scanned image
Julie this video is great - I was wondering how to do you remove the stamp from my Design center once you have use it. Cause I've got a few in there and I will not be using these stamps anymore.
I was wondering if I have other quilting designs that I would like to use in place of the stippling, is there a way to use them and have them stitch around an embroidery design?
Hi Barbara, I need to do a video that addresses this specific request, but in the meantime, one of my early videos "Pt 2 Line emblem fill" shows how to scan in a previously stitched design and add boundary points to stipple.
No one could have done this video any better. Julie has a great voice for the instructions, spoke slowly, showed all steps up close so I could see what she was pushing on the screens, and simplified the instructions so I could understand what she was doing. I will watch this over and over again till I can remember how to do this. These two features (adding designs and stippling around designs) were the determining factors in me buying the Dream Machine. I WOULD NOT TRADE THIS MACHINE. Thanks Brother !!!!
What a great video. You explained every thing better than I have seen before. Hope to find and watch more of your videos. This is one of the best I've seen. Thanks.
Thank you Barbara...feel to subscribe and select Videos at the top and you should have access to all 48 free videos I’ve made so far
Thank you. I love the way you explain each step and at a speed most people could follow. I have been having trouble stippling around Sleeping Beauty on my Luminaire XP1. I had already taken it off the hoop, but after pressing it I got more puckers and I thought stippling would cover them. I scanned it in, after reattaching in the hoop. I tried so many times with no success, I think I was getting more confused each time I tried something different. I see now why I had a shadow of the scan underneath. I am new to the Luminnaire XP1 and have got both upgrades. I am going to watch your video again step by step and hopefully I will be successful!!! Thank you very much for time taken in making this video.xx
I hope everything worked out. Puckers generally happen when there is not enough stabilization. One thing that helps is if you know you can wash the fabric after stitching, then I would definitely use a Tacky Wash Away Adhesive on top..I use the Floriani Wet-n-Gone Tacky. The Realign Design P1-P3 should be helpful in realigning the design in the hoop. I also own an XP1 and love it. Let me know if you need any other help.
Thanks Julie! Your video really helped a lot. It’s interesting to know both ways to add stippling. And this was my first venture into the Design Center. Thanks again!
Thank you Anne...you will love integrating the Design Center into your embroidery.
Thank you. This is exactly what I was looking for. You are very clear in your instructions.
Thank you Ed
This is my favorite video explaining this. You left out nothing. Thank you so much.
I want to thank you for this video. I tried for about 2 hours today to make a stamp and then add stippling. This video was what finally helped. I have been watching too many Luminaire vids and I don’t have one😥
Thank you Dot...I have been in the middle of a renovation and haven't had access to my machine, so I went and bought a Luminaire. :) I'm actually thinking of filming a comparison video.
Julie Murphy - Dream Machine oh no, lost another great teacher to the Luminaire. Just don’t know if I can justify it at age 75. It’s the first time I haven’t upgraded when the new machine came out. My dealer didn’t want to do trades for Dreams that had over 3,000,000 stitches. Mine has about 6,000,000😂
@@dotzig Hi Dot, I kept both machines and will still be filming videos on the Dream...I'm just ready to get through our renovation and start filming again.
Love this on our machines. IQ is my fave. Thanks for a fabulous review. I always learn something from your tutes. You’re great. Super teaching style!
Hi Cyn, thank you for the kind words.
Julie you are so good at explaining! I love your voice. I am so happy I found you on youtube. Thank you and I'm looking forward to more videos.
Thank you Brigitte!
Thank you so much! I’m so happy to find your channel!
Thank you again Julie, great video, keep them coming.
Hi Julie! Have you ever considered moving to Regina, Saskatchewan, Canada? I’d love to have you as my neighbour!! I love your videos. You explain things so well. My only question right now is, if I was to do a quilt (which I’m no where’s near attempting), how would I do the stippling throughout the entire quilt? Obviously the rectangle on the machine isn’t the size of the quilt. I hope you can help! I look forward to more of your videos. I’m not good at reading manuals. I get all mixed up.
Julie I'm so impressed Ilove you tutorials thank you !!!!
I'm hoping to buy a Brother Stellaire XE1 soon... I'm assuming all your fantastic Dream Machine tutorials will still be applicable?
Congratulations on possibly purchasing the Stellaire XE1. I haven't worked with the Stellaire, but I purchased the Luminaire and it is very similar to my Dream Machine and my Destiny. Because they are all made by the same company, I would think most of the icons and buttons would be very similar. Can't wait to hear what you think when you get your new machine.
@@JulieMurphyDreamMachine thanks for the reply. Well.... I bought the Stellaire XE1... AND I LOVE IT! It is absolutely amazing... a joy to use. I've been considering starting a UA-cam channel to share videos because theres so little about it online, but am just enjoying using at the moment. It's so fast!
I was going to ask whether it applied to the Luminaire XP1 but just seen your response to Jay. Thank you
Thank you very much! Such a clear tutorial!
thank you for the wonderfully informative video
Thanks Julie, another fantastic tutorial! 🌹🌹
I have a the sister machine-babylock- your are a fantastic teacher, thankyou so much... what a great video.... Please do more???????
Thank you for the encouragement
fantastic so thankful for the tutorial to get the best use of this machine .
Thank you Julie. I was not very successful but getting there! It took me some time following your instructions to get a result. (Me not your instructions).Although I managed to get the stippling with outline only of sleeping beauty, I could still see the design underneath when using the camera. I tried to turn off background in settings but it was greyed out. Is there a way of resetting it. In the end I just started to stipple to see what would happen as I had already scanned in the stitching.At first It was okay but then the stippling tried to stitch over the embroidery I had sewn. When I could see that happening I went forward stitches to avoid it. Because of the ghost outline it was stitching in wrong place. It will only be a practice piece. I also think when I took it off machine I noticed I had not rehooped it centrally and because I could not turn off background. In a way I was not too disappointed because I at least got as far as learning how to just have stippling around outline only,thanks to you. Thank you for your advice about stabilizer. Any advice how to reset background button. Thank you for helping me. I am not sure if I explained it well, I feel a bit stupid but hopefully I will get there. So much to learn on the Luminaire. Can I ask what the realign P1-P3 are. Thank you
foreverwestlife1 I’m sorry you are still struggling..The Realign P1-P3 are a series of videos I did that help you realign a design in the hoop when you have something go wrong and need to realign your design when you are partway through stitching. Also, I am not sure I understand where you are having trouble with the design underneath...there is a button that you can press on the screen that will remove the scanned image...let me check the videos and see if I can find the one I talk about it.... found it I talk about the button I think you are talking about in the Project Pumpkin video Part 1 at about the 2 minute mark. Let me know if that is what you mean about seeing the scanned image
Thank you I’ve learned so much from you
Thank you Jodi...your kind words mean so much
Julie this video is great - I was wondering how to do you remove the stamp from my Design center once you have use it. Cause I've got a few in there and I will not be using these stamps anymore.
The best
Can this be used to go around the logos on a T-shirt quilt
I was wondering if I have other quilting designs that I would like to use in place of the stippling, is there a way to use
them and have them stitch around an embroidery design?
Hey Gina, not that I know of, but that would be nice.
Sorry Julie forgot to mention that I have the Dream Machine 2
Do you have a tutorial on stippling around a design already done,not a brother design?
Hi Barbara, I need to do a video that addresses this specific request, but in the meantime, one of my early videos "Pt 2 Line emblem fill" shows how to scan in a previously stitched design and add boundary points to stipple.