Nepa Agri-Commerce /JD 6930 +ROC RT1000 JD 82000+KRONE BIGPACK 1290XC HDP/ -Paglia 2017-
Вставка
- Опубліковано 26 сер 2024
- Buongiorno a tutti!!! Team Nepa impegnato nella ranghinatura e pressatura paglia con con accoppiata john deere e roc/krone. Mezzi impiegati: JD 6930 equipaggiato con un andanatore Roc RT 1000 e un JD 8200 equipaggiato con una pressa quadra Krone BigPack 1290XC HDP.
Album fotografico qui: www.facebook.c...
FACEBOOK FANPAGE: / roland26
Several problems baling the sidehills.
1. The pickup cannot move independently higher or lower on the left side versus the right side. So when the baler leans downhill, the uphill side of the pickup, is lifted away from the ground.
2. The castering rear axle was NOT locked in straight ahead, so it was allowing the baler to drift downhill/sideways.
3. The windrows were so wide that the tractor tires were running on top of the thick slippery windrow edges and not getting good traction. The windrows should have been made narrower where the hills were steep.
David Rowley Several problems with your comment. This ain’t America where we have land that has some hills as in our farm in GA. This is overseas and if you’ve ever been there you would understand they have no other option. They do the best they can. Too big of a baker on that siding. Sure but in the valley areas which is probably the bulk of his fields it’s just right. Windrows r a bit wide but at the same time if they get to high and “roll” then that’s not helping either. Remember the merger is running that same ugly slope. Again thgh if uve never been in that area then it’s hard to judge. If I had not seen it before id criticize too.
you must be a non farmer pointing out problems you think exist but in reality all 3 of your points are wrong lol
1. the pickup is not lifted away from the ground on the uphill side unless the thing is in the process of tipping over
2.the castering rear axle should NOT be locked, it's there for this exact situation
3.the edges of the windrows are not "slippery" lol
4.you have no clue what you're talking about :)
@@farmcentralohio why do you say the edges of the windrow aren't slippery? If the tires are on the windrow at all of course it's gonna be a lot more slippery than on the bare ground itself.
@@JoshuaSmith-xw6jp Slippery? really? I've been baling a long time, on hills that will nearly pitch you out of the tractor seat, and I have never found any part of a windrow to be slippery.
Ma non si può bloccare il secondo asse della Krone??? non aiuterebbe ad evitare che scivoli'??
Bellissimo video e belle macchine!! Grande Abruzzo💪💪
Great Video. Greetings from Germany
I never seen a merger working in straw before, But if it works why not
Nice video !
Amazing videos
Ma perché tiene il pick up della krone sollevato?
Would be a pucker moment for sure. Great video. Thanks.
di dove siete
Here's to just getting it done🍻 fair play lads
Why is the pickup of the baler set so high ? :-/
because the baler man was too lazy to put the wheels properly
@@ivgotballsofsteel4048 look how rough the fuckin field is bud.
Ma quanto pesa la pressa ? Bel video e macchine cmq
Hard dry ground like that he should have dropped the tire pressure on the 8200
Imagine have the moneys to a so expensive rake and don't have the moneys for a shield to the PTO shaft 1:57
magnifico conplimentoni
Epic bit of raking and baling
che macchine!!
Song name at 0:34?
Top Video 👍👍👍
Super video
Brill vid 😎👍
Top viedo LG Agratechnik Bad Essen Grüße Julian
Bel bel video
località del video?
Never seen a baler sliding away XD
Maybe its because the ground is flat here in the Netherlands
CrazyDogfighter or because the operator forgot to lock the trailing axle...
i dont think a n8 ford or to30 fergie would handle that baler
That JD was doing well to hold it back on the hills
Ale macie dziury na polu. Masakra. Sprzęt strasznie skacze. John Deere bardzo fajne mocne
Твою девизию, что мужик на тракторе таскает пресс подборщик BIG PAC,так медлино ,можно быстрей ехать епт
Un po' troppo grossa la pressa per il 7200 così lo crepate!!!!😂🤣🤣Soprattutto in salita....
il john deere con l'imballatrice è un 8200 io abito vicino a nepa e ora gli ha attaccato un bivomere
Nn e pressa per collina.. O a limite trattore più grandicello 😉
Würde halt die Lenkachse am Hang sperren🤦🤦
Klasse Video,nur die Musik nervt !