Step 1. Set MPV Lever on Regeneration Step 2. Dissolve salt in tank and insert regeneration pipe into tank Step 3. Start softener and recharge will starts
Sir normally you can do 2:1 Ratio Like 10 Minutes Backwash 5 Minutes Rinse Also you can check water quality if water is coming in the drain line is dirty then repeat the process.
Two problems may be there. 1. Your Multiport Valve is doing Malfunction or 2. Your Strainer is doing Malfunction Solution 1. Check by replacing MPV 2. Check by replacing Strainer and Pipe.
Excellent method of learning , thank you sir
Thanks Dear
धन्यवाद 🙏
Welcome
Thank you sir ☺️
Welcome
Nice
Thanks
Ye Jo tin hai isme kya kya hota hai
@@संघर्षयोद्धामनोजजरांगेपाटील Sediment Filter / Carbon Filter / Iron Remover
Sir softner ko salt recharge kaise karen
Step 1. Set MPV Lever on Regeneration
Step 2. Dissolve salt in tank and insert regeneration pipe into tank
Step 3. Start softener and recharge will starts
CAN YOU PLEASE MAKE A VIDEO OF SALT PROCESS IN R.O....
You mean the recharging process in Softener?
Sir teeno filter ko 1 saath back wash rinse kar sakta hai kya
No Sir
Back wash kitni der Tak karna chahiye
Sir depends on water quality, check and do accordingly
Kitna minute tak karna hai
As per water conditions, there is no fix time
Kitny min.tak Krna h.backwash rinse
Depending on situations, not fixed
Chemical nahi dalethu kuch hota sir
Depending on water quality, if hardness is high chemical use is a must.
Dosing pump se kya hota hai
Whenever you are required to add some chemical for specific uses in the system, the dosing pump is used to add chemicals.
Thanks
@@ujjwalchaurasai2292 welcome
Sir backwash and rinse kitne minute karna hai
Sir normally you can do 2:1 Ratio
Like
10 Minutes Backwash
5 Minutes Rinse
Also you can check water quality if water is coming in the drain line is dirty then repeat the process.
Wall ko pitna bhi hai
Sir what to do when sand and gravel come out when doing back wash ??
Two problems may be there.
1. Your Multiport Valve is doing Malfunction or
2. Your Strainer is doing Malfunction
Solution
1. Check by replacing MPV
2. Check by replacing Strainer and Pipe.
@@SatyaNeerokay, thank you sir