How To Replace Mercedes-Benz C240/C-Class Fuel Injectors

Поділитися
Вставка
  • Опубліковано 19 жов 2024
  • Watch as we complete another task in servicing the fuel system. We've already replaced the fuel filter and pump (check out those videos below), now we take care of replacing the fuel injectors. Good and simplified details on what to do and which tools to use but, only if you are a confident DIY'er. All others please get knowledge here, about how it's done but, get an auto shop/dealer to take care of your vehicle.
    Check Out The Links Below 👇🏽👇🏽👇🏽👇🏽👇🏽:
    Broke Down On The Highway -
    • Broke Down On The High...
    How To Replace Mercedes Fuel Pump AMG/C-Class -
    • How To Replace Mercede...
    We are not sponsored nor affiliated with this seller but they sell the
    Injectors (WE HIGHLY RECOMMEND YOU MATCH YOUR PART VIA PART NUMBER. WE ARE NOT RESPONSIBLE FOR YOUR MISHAPS OR ANY DAMAGES.) -
    www.ebay.com/i...
    #MahlonTane #tane #UkanFixit2 #Mahlon #Tane #APTTMHUkanFixit2 #APTTMHUcanFixit2 #UcanFixit2 #GrowIsraelites #IsraelitesGrow #IsraeliteMechanix #HowToReplaceMercedezFuelInjerctors

КОМЕНТАРІ • 42

  • @anthonyriche552
    @anthonyriche552 Рік тому +5

    Excellent video my bro. I've seen a lot of these but yours to me was the best. Super-clear shots and great explanation. You gave me the confidence to change mine out this weekend.

    • @MahlonTane
      @MahlonTane  Рік тому

      Thank you for tuning in to our channel. We hope things work well for you. Just take your time and always keep safety 1st; a long with patience. Tap that LIKE and SHARE our video, if you don't mind. It helps our channel reach others. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We really appreciate your support!

  • @MaSheen3000
    @MaSheen3000 6 місяців тому +1

    Very well done and thorough. Especially, that you say the tool, and size you're using; very rarely does anyone who posts a walkthrough on UA-cam actually do that.

    • @MahlonTane
      @MahlonTane  6 місяців тому +1

      Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!

  • @clappin.cheeks
    @clappin.cheeks 3 роки тому +3

    Thanks for the video. Just what I needed to fix my cylinder 5 misfire. Will just be replacing that fuel injector. 👍

  • @mikeclavette3399
    @mikeclavette3399 Рік тому +1

    Great video, just a chill tutorial of how to do this. This helped me a lot dude, thank you!

    • @MahlonTane
      @MahlonTane  Рік тому

      Thank you for tuning in to our channel. Tap that LIKE and SHARE if you don't mind. Hopefully it helps reach others that could find it useful as well. Also, Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We really appreciate your support!

  • @juliofaena
    @juliofaena 9 місяців тому +1

    Thanks for the tutorial, just what I was looking for.

    • @MahlonTane
      @MahlonTane  9 місяців тому +1

      Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our channel helped you out a little. We really appreciate your time and support!

  • @randytyson755
    @randytyson755 Рік тому +1

    Excellent work job well done!

    • @MahlonTane
      @MahlonTane  Рік тому

      Thank you for tuning in to our channel. Tap that LIKE and SHARE if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We really appreciate your support!

  • @glenfinklea4117
    @glenfinklea4117 3 роки тому +2

    Thanks for the information. I am going to replace the seals on the injectors so this is just what I needed. U B D Man.

    • @MohauTau
      @MohauTau Рік тому

      What's the size of those seals?

  • @bryonhill9294
    @bryonhill9294 2 роки тому +3

    Thanks for the video did you have to remove fuel relay or fuses before fixing the injectors and how did you bleed the fuel line before taking off the fuel connector or hose

    • @MahlonTane
      @MahlonTane  2 роки тому +1

      I did not have to remove fuel relay or fuses. There's a bleeder valve on the front right side of the motor (1:12) of the vid will show

  • @PaulPaid
    @PaulPaid Рік тому +1

    Shalahm Ahk. Good Job.

    • @MahlonTane
      @MahlonTane  Рік тому +1

      SHALAM SHALAM!! Thank you for tuning in to our channel. Tap that LIKE and SHARE if you don't mind. Also, Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We really appreciate your support!

  • @ronwood6326
    @ronwood6326 2 роки тому +2

    Damn , sure do preciate your video . Thanks

  • @DENS973
    @DENS973 6 місяців тому +2

    Some words of wisdom. Remove the fuel pump fuse crack her up about 10 sec. to remove any gas in the rail etc.

    • @MahlonTane
      @MahlonTane  6 місяців тому +1

      Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!

  • @farradaghajanian9846
    @farradaghajanian9846 2 роки тому +2

    Thanks for this awesome video, can I ask what was your C240 doing when you found out your fuel injector was bad. Mine ideling low when it's cold and normal when I drive on freeway for 20 minutes later goes normal.

    • @MahlonTane
      @MahlonTane  2 роки тому

      Thank you for watching and supporting our channel! Check out the description of this video there's "Links Below" when it broke down on the freeway. Also other work done to it. But you pretty much described, how it was acting before it died on me.

  • @westthugridaz1
    @westthugridaz1 2 роки тому +1

    Thank you

  • @almightyheazyyy2329
    @almightyheazyyy2329 7 місяців тому +1

    What kinda oil u use for the seals on the injectors rings

    • @MahlonTane
      @MahlonTane  7 місяців тому +1

      Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We like to utilize used motor oil; but fresh motor oil will also work. All you need is a small drop. Sometimes, we just put the oil dip stick and dap a finger on the oil from the stick. But this is our method, that we found to work. We hope our content helped you out a little. We really appreciate your time and support!

  • @FestusMuberuka
    @FestusMuberuka Рік тому +1

    after doing this repair i noticed at the gas station when pumping gas pump shuts off automatically. any ideas the two hoses on the right are plugged in

    • @MahlonTane
      @MahlonTane  Рік тому +1

      Thank you for tuning in to our channel. Tap that LIKE and SHARE if you don't mind. It helps our channel reach others. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. I don't exactly know what or which hoses you are referring to. Can you clarify a bit? You might have other issues. We highly suggest seeking a professional mechanic.

  • @trevormeyer2191
    @trevormeyer2191 2 роки тому +1

    Word

  • @chrisisho2557
    @chrisisho2557 2 місяці тому +1

    May I know how coding new fuel injectors for C250 2012 if new injectors has not not part number on it ?

    • @MahlonTane
      @MahlonTane  Місяць тому +1

      Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We hope our content helped you out a little. We really appreciate your time and support!

  • @scott414b
    @scott414b 3 роки тому +1

    how did u get the fuel rail off the black connector power on top?

    • @MahlonTane
      @MahlonTane  3 роки тому

      I don't know what "black connector power on top" you are referring to. Can you be more specific? If you are referring to the black plastic cover... It's all shown in the video.

  • @monolithworldline
    @monolithworldline 2 роки тому +1

    Hi. I have a 2004 C240 and the injectors are RED. Those are rare. I only need to replace one, and what if I get one blue and leave all other reds as is? That is my question.

    • @MahlonTane
      @MahlonTane  2 роки тому

      If you already have your injectors off. I suggest for you to go with your part number first or cross-reference it to see which other ones will work for your application. Please let us know how things work out for you. Regards in advance!

    • @monolithworldline
      @monolithworldline 2 роки тому +1

      @@MahlonTane That is my mistake. I had the injectors inserted back without noting the part number. I might have to access the injector briefly just to note the number before I go to a large car disassembly site.

    • @MahlonTane
      @MahlonTane  2 роки тому

      @@monolithworldline i believe the info (part number) of the injectors we used is in the video. Check it out and see if it's applicable to your vehicle

    • @MahlonTane
      @MahlonTane  2 роки тому

      @@monolithworldline check this out
      www.ebay.com/itm/264540366545

  • @malicealiceinwonderland7952
    @malicealiceinwonderland7952 2 роки тому +1

    Do you have to program these injectors ?

    • @MahlonTane
      @MahlonTane  2 роки тому

      Thank you for watching and supporting our channel. Subscribe if you haven't already. We did not have to program the injectors. We did however clear the code or engine light from the system.

  • @mar34598
    @mar34598 3 роки тому +1

    👏👏👏💯

  • @nigelnkunzi6414
    @nigelnkunzi6414 Місяць тому +1

    So there was no need to code the injectors

    • @MahlonTane
      @MahlonTane  Місяць тому +1

      @@nigelnkunzi6414 Thank you for checking out our channel. Tap that Like and Share if you don't mind. Also Subscribe if you haven't already. We have different content in our catalog that you might like or find interesting. We did not have to clear any trouble codes for our application, if that's what you are asking. We hope our content helped you out a little. We really appreciate your time and support! 💯🔥