in frontend write function to generate some kind of token by using current window domain and validate or decode that token on server side to check if right domain name exists or not . to simplify this on server side you can add middle were to decode or validate token .
this was the first video I watched in you channel which very impressive and understanble I am searching for a good video to use evilgnex. but if i have any doubt how can i approch you sir??
@@FluxxSet thanks for your quick resonse. Im not sure what the SSL will help. Maybe let me explain mor clearly. I am running evilginx on my raspberry pi and it gets assigned a new public ipv4 every day or so. I have my domain/website pointed to that public ipv4, but as it changes after a while the connection gets lost since the domain is now pointing to the old ip. I dont know if Im completely wrong and this would work some other way or not. My solution was to use eg cloudflare as DDNS. My router sends my new ip address to them and they will change the dns settings. Now im just not sure on how to set that up. What to use on cloudflare, what settings on the godaddy dns settinge and what settings on my local setup of evilginx
@@NicoleAbraham-v9l maybe you are doing something wrong, Instead of this video do one thing check the complete series on the evilginx where all steps are explained in detail videos
I tried setting a phishlets for a site after 2 trials I got it and now my eviljinx is giving a message error which says config: while parsing config: yaml: line32: block sequence entries are not allowed in this content...plz help
Hi thanks for the video. I run a evilginx 2 installed on my server. I always get a red page or server report each time I host the office phishlets, also how do I get the phishlets you used ?
i dont share any phishlet , specific to any website , boc its not legal. how ever i can share pattern so that you can build your own , here is link shop.fluxxset.com/?product=evilginx-phishlets-templets
@@FluxxSet I got this after creating my phishlets:failed to load phishlet 'office.yaml': While parsing config: yaml: line 24: did not find expected key
@@FluxxSet "$GOPATH/go.mod exists but should not", but if I delete go.mod, "go: cannot find main module, but found .git/config in /home/ubuntu/test/evilginx2 to create a module there, run: go mod init make: *** [Makefile:8: build] Error 1"
bro i'm getting go: downloading go1.22 (linux/amd64) go: download go1.22 for linux/amd64: toolchain not available error when i try go build command but go is installed please help in this
Can a normal shared hosting be used for this? I already have a shared hosting, I don’t know if that will work, instead of purchasing digital ocean VPS… is it only VPS that works for this?
Is there a way to use with proxy turned ON on cloud flare ? Because this provides privacy of server original IP so just wondering if there is a way to fix this please :) ??????
hELLO BRO I am using this version: version 3.3.0 . BUT . I am using Kali. For me, only " | example | disabled | visible " appears. Why don't other phisleths appear?
Thank u so much for the video
I was able to get evilginx up and running
I was sure the dog was in front of my hose, nice mic man hahaha :D
🤣
hi very good video. What security should I use on my website? which one did you use?
in frontend write function to generate some kind of token by using current window domain and validate or decode that token on server side to check if right domain name exists or not .
to simplify this on server side you can add middle were to decode or validate token .
Problem while creating phishlets...Can you help..please
Much needed help
@@Letitbe-937 pls connect on telegram
this was the first video I watched in you channel which very impressive and understanble I am searching for a good video to use evilgnex. but if i have any doubt how can i approch you sir??
you can use email or telegram from my profile or
contact from hire.fluxxset.com/
How do you deal with dynamic ip adress changing of your network? I want to use a dyndns but I'm not sure how to set it up exactly
@@elwii04 Frist get SSL using static and then change records for dynamic , it will work without any issue as long as SSL is not renewing
@@FluxxSet thanks for your quick resonse. Im not sure what the SSL will help.
Maybe let me explain mor clearly. I am running evilginx on my raspberry pi and it gets assigned a new public ipv4 every day or so.
I have my domain/website pointed to that public ipv4, but as it changes after a while the connection gets lost since the domain is now pointing to the old ip.
I dont know if Im completely wrong and this would work some other way or not.
My solution was to use eg cloudflare as DDNS. My router sends my new ip address to them and they will change the dns settings. Now im just not sure on how to set that up. What to use on cloudflare, what settings on the godaddy dns settinge and what settings on my local setup of evilginx
I think cloudflare ddns is best for you .
@@FluxxSet yes that is what I was trying, but still having trouble setting it up..
@@elwii04 what's issue?
am i able to configure evilginx without Digital ocean?
yes
the only requriment is you should have static ip
Sir,I having vps but not of digital ocean so can I create phishlet through that vps
yes
also make sure that you have minimum 1 GB ram on VPS
@@FluxxSet Do u hv any telegram group
no i dont have any group you can connect through fluxxset.com messaging or email
why does the phishing lure url fails to load, I have followed every step
@@NicoleAbraham-v9l maybe you are doing something wrong,
Instead of this video do one thing check the complete series on the evilginx where all steps are explained in detail videos
@@NicoleAbraham-v9l ua-cam.com/play/PLOlX9QtPIng0pNLW0PvbfHsxyxvo86ykk.html&si=kXTS8aPVj_2NZ3hG
Mine keeps putting and . Instead of an - between the domain and subdomain name, do you know how to fix it ?
@@pinkhat_h dose your domain looks like this ?
My-domain.com
I tried setting a phishlets for a site after 2 trials I got it and now my eviljinx is giving a message error which says config: while parsing config: yaml: line32: block sequence entries are not allowed in this content...plz help
on line32 you must have extra space at the end or sysntex error
Plz sir
I'll really appreciate if you give me a solution on how to fix it
@@Paypal-p4jhe already told you to put extra space in line 32. Do it with vim or neovim.
it's still working? I would pay to know😭
t.me/fluxx03
Hi thanks for the video. I run a evilginx 2 installed on my server. I always get a red page or server report each time I host the office phishlets, also how do I get the phishlets you used ?
i dont share any phishlet , specific to any website , boc its not legal.
how ever i can share pattern so that you can build your own , here is link shop.fluxxset.com/?product=evilginx-phishlets-templets
@@FluxxSet I got this after creating my phishlets:failed to load phishlet 'office.yaml': While parsing config: yaml: line 24: did not find expected key
@@ObrineJohn msg me on telegram
Why does it only work in my windows rdp, when I send link outside my rdp it doesn’t work… I’m confused , please help 🙏🙏🙏
i think you misunderstood something, issue must be somewhere else.
pls share screenshot if possible
I can't make or go build the binary at all. I've tried for hours. Error after error
pls share error here
@@FluxxSet "$GOPATH/go.mod exists but should not", but if I delete go.mod, "go: cannot find main module, but found .git/config in /home/ubuntu/test/evilginx2
to create a module there, run:
go mod init
make: *** [Makefile:8: build] Error 1"
bro i'm getting go: downloading go1.22 (linux/amd64)
go: download go1.22 for linux/amd64: toolchain not available
error when i try go build command
but go is installed
please help in this
may be your go is not in path ,
@ApexBillionaire check go binary path .if not in path then add .
Can a normal shared hosting be used for this? I already have a shared hosting, I don’t know if that will work, instead of purchasing digital ocean VPS… is it only VPS that works for this?
no shared hosting can not be used , only vps
or
local pc with static ip
Hello, please I tried to set up evilginx and I’m getting a “failed to set up TLS certificates:” error could you help me with a possible solution.
its dns issue pls check records , also if you are using cloudflare then make sure you have proxy turnred off for records .
Is there a way to use with proxy turned ON on cloud flare ? Because this provides privacy of server original IP so just wondering if there is a way to fix this please :) ??????
@@mavic3help yes once you got the ssl then you can turn on proxy or you can turn on proxy before and use self signed ssl
@FluxxSet I’m using cloud flare and the proxy is off but I’m still getting this error
@@abasskonneh5853 is there anyting else running on port 80 on server ?
if yes that also can interfare in validation process .
hELLO BRO
I am using this version: version 3.3.0 . BUT . I am using Kali. For me, only " | example | disabled | visible " appears. Why don't other phisleths appear?
if there is any syntext errors then phishlets will not appear
@@FluxxSet Can I get support via e-mail regarding this issue?
@@tektabanca3275 easy to fix, I’ll be posting a tutorial very soon on Evilginx configuration, stay tuned
@@tektabanca3275 sure
@@FluxxSet hello bro. I hope you are well ? When will the video about evilgnix settings share ?
You used putty to login vps or is it Kali?
i am using ubuntu , its terminal same as kali
Thanks
do you have discord? i want to pay you
pls connect through telegram t.me/fluxx03