Nice job and great tutorial covering all the basics. Personally I don't like the flesh side sitting on the skin, but that is a personal preference. Love using my crimson hide irons myself.
Q buen trabajo, ya hice varias de esas ya hace un tiempo. Con el uso no apropiado se reseco en el mismo lugar, hacia un tiempo antes q visite un museo aeroespacial, y al tener un lunar pilot. La mía la corte he hice una de el tipo bulova qué queda fantástica también y no da tanta altura ya qué entre la tapa y la piel no tienen material
If you didn't have that extra piece under the watch, would the watch still hang on if a springbar broke? It seems like a lot of bulk under the watch. Great video, I'm going to give it a shot
The watch would still be perfectly secure without the extra piece. That piece prevents the watch from sliding on the band and means the buckle will always be on the opposite side of your wrist. It does add bulk though and you could make the strap without it without any problem.
Found it on Etsy: it's the 1.5x3.5mm Oval Punch version by KRSDreamer www.etsy.com/uk/listing/713481132/watch-strap-punch-5-holes-hollow?ref=yr_purchases&variation0=1171104527 It's by far not a cheap tool but certainly VERY useful if you're into making watch straps.
@@Ten.to.one.handmade I purchased it while it was on sale for just about 100£ (110€). Build quality is good: it's a lump of steel but the finish is really clean. The teeth cut really nicely and are changeable so if there's an issue in the future they should be replaceable. I haven't used them that much yet but am very satisfied with the result.
I made a strap just like this a few years ago out of natural veg. The cracking issue happened to mine aswell simply from the sweat and water exposure despite my regular care. Now all my watches have rubber or Nylon nato straps, unfortunately leather just doesn't suit the environment a watch is put through.
You obviously didn’t use thick enough leather, like in this video. I do agree that nylon canvas/webbing (or other synthetics like polyester etc) at much more durable and stronger (depending o. The quality of the product). Still, a properly made leather watch strap can last a lifetime. The leather used in this video is way too thin. He should have lined it and stitched all around or used a thicker leather for this less refined/more “rugged” style of strap.
@@AlexanderMason1 I checked out your other comments and they all are also overly critical and rude. James and I had to use thinner leather otherwise they won't slip under the lugs of the watch. Whats the point in being in the leatherworking community if you're going to be a prick?
Thankyou for the nice and simple explanation of making the nato strap
Glad this helps :)
Thanks for posting!!
As always Mr. Berry you did a nice job with an excellent voice-over. I look forward to your next post.
CW Peterson
Grass Valley, California; USA
Thank you so much for your kind words!
So pleased you enjoyed it :)
Nice job and great tutorial covering all the basics. Personally I don't like the flesh side sitting on the skin, but that is a personal preference. Love using my crimson hide irons myself.
Thank you Florian, glad you liked it. Same, I always recommend their irons to anyone wanting to up their stitching game :D
Q buen trabajo, ya hice varias de esas ya hace un tiempo. Con el uso no apropiado se reseco en el mismo lugar, hacia un tiempo antes q visite un museo aeroespacial, y al tener un lunar pilot. La mía la corte he hice una de el tipo bulova qué queda fantástica también y no da tanta altura ya qué entre la tapa y la piel no tienen material
how do you do it with vegtan back and some nice leather on top
What kind of wax do you use? I personally use mink oil on leather straps.
I was wondering the same thing
If you didn't have that extra piece under the watch, would the watch still hang on if a springbar broke? It seems like a lot of bulk under the watch.
Great video, I'm going to give it a shot
The watch would still be perfectly secure without the extra piece. That piece prevents the watch from sliding on the band and means the buckle will always be on the opposite side of your wrist.
It does add bulk though and you could make the strap without it without any problem.
Those are usually called single pass natos and as answered before yes, it works.
Any change you share template for this strap?
Where did you get that last hole punch you used? I’m struggling to find good oblong and square punches like that for watch straps
Found it on Etsy: it's the 1.5x3.5mm Oval Punch version by KRSDreamer
www.etsy.com/uk/listing/713481132/watch-strap-punch-5-holes-hollow?ref=yr_purchases&variation0=1171104527
It's by far not a cheap tool but certainly VERY useful if you're into making watch straps.
@@JamesBerry thanks!
How would you rate the quality by the way? That is an eye watering price for what it is, so wouldn’t want to regret the purchase :)
@@Ten.to.one.handmade I purchased it while it was on sale for just about 100£ (110€). Build quality is good: it's a lump of steel but the finish is really clean. The teeth cut really nicely and are changeable so if there's an issue in the future they should be replaceable.
I haven't used them that much yet but am very satisfied with the result.
I made a strap just like this a few years ago out of natural veg. The cracking issue happened to mine aswell simply from the sweat and water exposure despite my regular care.
Now all my watches have rubber or Nylon nato straps, unfortunately leather just doesn't suit the environment a watch is put through.
You obviously didn’t use thick enough leather, like in this video. I do agree that nylon canvas/webbing (or other synthetics like polyester etc) at much more durable and stronger (depending o. The quality of the product). Still, a properly made leather watch strap can last a lifetime. The leather used in this video is way too thin. He should have lined it and stitched all around or used a thicker leather for this less refined/more “rugged” style of strap.
@@AlexanderMason1 I checked out your other comments and they all are also overly critical and rude. James and I had to use thinner leather otherwise they won't slip under the lugs of the watch. Whats the point in being in the leatherworking community if you're going to be a prick?
@@nathandkreosote9917 how am I rude? Because I’m direct? Maybe stop being a snowflake…
@@AlexanderMason1 lmao snowflake, people still use that?
@@nathandkreosote9917 lol keep liking your comments buddy…
What glue do you use?
I use a neoprene ciment glue.
Calling 2.2 cm 2.2 mm repeatedly, driving me crazy!!! lol Great vid, well done!
Sorry for the brain hurt then but glad to hear you like the video :)
U mean 2.2cm
read the title first as ”natural vegan leather”
Not sure the vegans would enjoy that!!
lol, I read it as "vegan" too!