precise drum making jig for DIY drum sanders / driven by drill [woodworking]

facebook : / woodworking.jj
insta : www.instagram....

[@keupondestroy911]

Merci beaucoup pour la vidéo

[@thewabisabicollective7170]

nice! I did the same thing but used my Rikon mini lathe. I used a similar router cradle to run along the bed. worked great! I still had some run-out but i just took a strip of 36 grit sandpaper the width of the drum and ran that through the sander(bare drum) to even it out, works great! well, again, nice video and excellent work!
~Beauty & Peace~
Kyle

[@pierredessage5530]

Merci beaucoup pour tout!!!.

[@rolandgdean]

That is pretty nice my friend. I made a similar jig that used my mini-lathe and router in much the same way to make precise dowels for my wooden hinges. However, with YOUR jig, you don't need a lathe to make this happen...very nice way to save money. Great video as always.

[@j-woodworking9573]

Next video will be drum sander driven by drill press. So I needed this.
Thanks for watching friend.

[@rolandgdean]

Oh I see! A drum for a drum sander...that's very awesome indeed. Can't wait to see the video. I've not been brave enough to make my own tools yet. Godspeed!

[@viorsa8200]

Excelente proyecto muy bien desarrollado y mejor ejecutado , muchas gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia ( España) 😜🤓🤣

[@j-woodworking9573]

Thanks for watching sir.

[@MCsCreations]

Really excellent work, my friend! Great jig! 😃
Stay safe there with your family! 🖖😊

[@j-woodworking9573]

Thanks for watching friend. Please stay safe with your family too.

[@petermeijer3019]

Super clean project!!! Nice done.

[@j-woodworking9573]

Thanks for watching sir.

[@enryraleight1527]

Useful and precise work. Congratulations

[@j-woodworking9573]

Thanks for watching sir.

[@LeosTueftelei]

Good idea and a nice job ! 👌 👍 👍
Greetings from Austria 🙋‍♂️ Leo

[@j-woodworking9573]

Thanks for watching sir.
Greetings from Korea.

[@seanoneill7085]

Very ingenious. I enjoyed watching this. It is simple and can be used to make accurate pieces. Having experience in engineering is very useful here. I hope you continue to make more videos. Keep up the good work and I hope you and your family are safe, healthy and happy.

[@j-woodworking9573]

How kind you are! Thanks for your encouraging comments. Please be safe and healthy with your family too.

[@victorcritov]

Nice.

[@MYSTERECORDS]

IL Y A PLEIN D IDEES INGENIEUSES SUR YTUBE .. PARFOIS CERTAINES ONT LE MERITE D ETRE SIMPLE ET TRES EFICACE... BRAVO MAN C SUPER TON TRUC...

[@j-woodworking9573]

Thanks for watching sir.

[@homemadetools]

Good work. We shared this video on our homemade tools forum this week :)

[@j-woodworking9573]

Thanks for your use of my video sir.

[@robertsoncletokoerner7012]

Parabéns e obrigado pelo ensinamento.

[@j-woodworking9573]

Thanks for watching sir.

[@VonDarek]

Fajny film. Tylko jestem ciekawy jak wyciągniesz ten pręt skoro go przykleiłeś na klej dwuskładnikowy? :)

[@tomowens2720]

The precision and detail you put into every project is a pleasure to watch.
Is the material you use mostly rubber tree finger joint wood?

[@j-woodworking9573]

Yes it is. I chose rubber tree board for better presentation. But it usually bent a little. That makes me have hard time. I recommend you use plywood to make jigs. That's better and cheaper. Thanks for watching sir.

[@paulstanding7267]

Nice jig even down to smaller sizes take care 👍👍😀

[@j-woodworking9573]

Thanks for watching sir.

[@suararakyat185]

i love your job and your videos. what u create and share has been give a good inspiration that artistic and clean job. and the choice of sound also not like others make my ear feel ungood. 👍👍

[@j-woodworking9573]

Thanks for watching sir.

[@hichemouerghi6917]

Bravissimo 👏

[@marcenariahobby7pallet]

Parabéns muito top 🇧🇷👏👍💯

[@j-woodworking9573]

Thanks for watching sir.

[@walter2066]

Great jig sir

[@j-woodworking9573]

Thanks for watching sir.

[@MrGeroth]

That’s just amazing.

[@j-woodworking9573]

Thanks for watching sir.

[@zainalabidin6390]

Best..amazing..👍

[@j-woodworking9573]

Thanks for watching sir.

[@paulolopes3726]

Great job 😁👏👏👏

[@j-woodworking9573]

Thanks for watching sir.

[@mingueyox]

Great craftsmanship 👍😊
What is the wood you are using?

[@j-woodworking9573]

Rubber tree finger joint board for better presentation. Thanks for watching sir.

[@mingueyox]

@@j-woodworking9573 The jig is indeed beautiful. I love your work. Thank you for the quick answer 🙏

[@user-ssrshin]

어떤 빅픽처가 있을까요
지그를 다 만드시면 어떤작품이?

[@j-woodworking9573]

전문가란 오랜 경험과 지식, 그리고 자신의 일에 관련된 다양하고 정밀한 도구를 소유하고 적절한 사용으로 최적의 결과를 만들 수 있는 능력을 가진 사람? 먼저 저에게 필요한 모든 지그를 만들어볼까 합니다. 반만이라도 전문가가 되고자하는 시도ᆢ.
감사합니다.

[@hugolima7588]

Excelente Trabalho ! Mais seria interessante se o Sr. pode-se disponibilizar o plano com as medidas.

[@j-woodworking9573]

I'm going to make a drum sander with it.
Thanks for watching sir.

[@jaconiasmachadoassuncaomac3272]

Gostei boa ideia vou copiar

[@jaconiasmachadoassuncaomac3272]

Gostaria de ter um projeto pra torno de madeira simplesmente pra fazer tigelas e copos de madeira.

[@j-woodworking9573]

Thanks for watching sir.

[@ameurhebbal7958]

Nice

[@windypup8845]

Buy a lathe?

[@j-woodworking9573]

Thanks for watching sir.

[@lexxtv5804]

Задумка и исполнение как всегда 👍, но результат несколько разочаровал.

[@j-woodworking9573]

Sorry about that.
Thanks for watching sir.

[@Grassy20]

Maybe now you need a lathe! :)

[@j-woodworking9573]

I don't have any necessity to have a lathe theses days. Probably later. Thanks for watching sir.

[@enockbatista6008]

Passa as medidas Mestre

[@j-woodworking9573]

Thanks for watching sir.

[@СаняИванов-ш6ф]

???????? ¿????????????? Зачем.??????

[@j-woodworking9573]

I'm going to make a drum dander driven by drill press. This is for it.
Thanks for watching sir.