FJ DIY Installations: Pioneer DMH-2660NEX, Beat-Sonic Backup Camera & Smartphone Mirroring System

Поділитися
Вставка

КОМЕНТАРІ • 52

  • @DartanyoValentino-gc9kb
    @DartanyoValentino-gc9kb 3 роки тому +3

    You did a fantastic job on my Lexus RC. I can’t thank you enough .

  • @oddjobbob8742
    @oddjobbob8742 7 місяців тому

    I want to say thank you for producing this UA-cam. I needed to know how you remove the plastic trim pieces from beside the radio. I know I could have easily removed the screw and pried them out, but my experience with plastic part removal usually ends in one sort of disaster or another.
    Seeing you do it so dimly and deftly gave me exactly the confidence I needed. The little “tray/rail” I received slipped right into place and looks like it belongs there.
    Thanks again!

  • @clayballz
    @clayballz 3 роки тому

    Do you have to use the Smartphone mirroring system with a 2008 FJ Cruiser for this setup to work? If so, I had trouble finding any mirroring kit that shows is compatible with the FJ.

    • @BeatSonicUS
      @BeatSonicUS  3 роки тому

      You will need an aftermarket radio that support video input to mirror your phone.

  • @appstate1996
    @appstate1996 Рік тому

    Hi and thanks for the video. I just bought an FJ cruiser with a Pioneer AVH 2550 NEX unit. Is it possible to somehow tap into the existing Toyota rear view mirror back up camera feed and connect it to the pioneer unit? If so, do you sell the wiring that would be needed and instructions on how to do the install? Thanks

    • @BeatSonicUS
      @BeatSonicUS  Рік тому

      Thanks for your inquiry. Unfortunately we don’t have that solution. Sorry about that!

  • @onelovedakota
    @onelovedakota 2 роки тому

    Can you advise which mirror kit was used? There are several on website. Also is any extra equipment needed to connect to subwoofer? Thanks.

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому

      For aftermarket radio you need just an hdmi to rca adapter. To connect a subwoofer you will need another amplifier

    • @sunsettonicz8037
      @sunsettonicz8037 8 місяців тому

      Trying to play videos on mines. Mirroring, how do you do so?

  • @joseantoniodelrioherrera2595
    @joseantoniodelrioherrera2595 2 роки тому

    Can you give me the list of accesories I should buy from you to install this stereo in a 2008 FJ cruiser?

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому +1

      You can get them at crutchfield.com

  • @kambizrasoulkhani4814
    @kambizrasoulkhani4814 Місяць тому

    Thank you for the video. Is there a way to connect the usb cable to the cigarette lighter?

  • @gabriel84
    @gabriel84 2 роки тому

    how does the stereo system know when you're putting the car in reverse to activate the back up camera?

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому +1

      From the reverse trigger via rear backup light

    • @ED-xk5sb
      @ED-xk5sb 2 роки тому +1

      @@BeatSonicUS so you connect the rear view camera hot wire to backup light and then you also run the reverse signal wire to the taillight hot wire as well to make it work?

  • @Blue_Moon_Forge
    @Blue_Moon_Forge 2 роки тому

    Will this be compatible with a boss audio head unit?

  • @dinoquintana7339
    @dinoquintana7339 2 роки тому +1

    Okay I’m wondering how the iPhone mirroring worked out ? I have the same model stereo and can’t seem to get screen mirroring to work? ???

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому +2

      You need purchase additional items from pioneer

    • @dinoquintana7339
      @dinoquintana7339 2 роки тому +1

      @@BeatSonicUS like what items?

    • @dinoquintana7339
      @dinoquintana7339 2 роки тому +1

      @@BeatSonicUS did you ever get mirroring to work?

    • @dinoquintana7339
      @dinoquintana7339 2 роки тому +1

      I have the apple to hdmi plug and the hdmi to rca adapter and the rca to 3.5mm plug and I still don’t get any video or sound..?/?

  • @Bststv
    @Bststv Рік тому +1

    I bought your cable and all the cables you used to install and my steering control does not work? Can you help solve the issue?

    • @BeatSonicUS
      @BeatSonicUS  Рік тому +1

      Please contact the steering wheel control brand as they can assist you

    • @Bststv
      @Bststv Рік тому

      Everything works now!!

  • @christianmorrison164
    @christianmorrison164 2 роки тому +1

    Nice detailed video. What is the approximate labor cost to have an install like this done?

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому

      Depends on the shop, but typically about 3 hours of labor

  • @Rawad-Halabi
    @Rawad-Halabi 7 місяців тому

    Hey, do you guys sell the complete READY harness for the 2013 fj cruiser with jbl amplifier interface and steering wheel control interface? If yes please share the link with me. I want to install pioneer dmh-w2770nex that I just bought. I would really appreciate it. Thanks

    • @BeatSonicUS
      @BeatSonicUS  7 місяців тому

      Unfortunately we don’t. We only haven’t BH1 6/10 pin harness

  • @michaelsantiago8161
    @michaelsantiago8161 2 роки тому

    So that radio fits without any mods? Because it's 6.8 inches instead of 6.2!

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому +1

      6.8 and 6.2 screens radios both carries the same double din size of 4x7 as such both will fit without any modifications

  • @trepaslames
    @trepaslames Рік тому

    So where the cables for a subwoofer would go?

    • @BeatSonicUS
      @BeatSonicUS  Рік тому

      If you would like to connect a sub, it would go from the rca jacks behind the radio, then to an amplifier, then to the subwoofers

  • @davidparker4505
    @davidparker4505 3 роки тому

    Does this setup support the JBL subwoofer?

    • @BeatSonicUS
      @BeatSonicUS  3 роки тому

      Yes you can connect the JBL subwoofer to the new radio via new amp

    • @davidparker4505
      @davidparker4505 3 роки тому

      @@BeatSonicUS will that require a new speaker system with the new amp?

  • @dons1643
    @dons1643 2 роки тому

    Where are you at? I in NC install one for me

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому

      Please email us your location and we can find you a nearest installer info@beatsonicusa.com

  • @emal2170
    @emal2170 3 роки тому

    Drill bit, but no free drill?

  • @Andrew-fj9no
    @Andrew-fj9no 2 роки тому

    How did you get your camera to work I tried one and it didn’t work because it’s encrypted only for the pioneer camera which is lame

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому

      Ours just worked out of the box

    • @Andrew-fj9no
      @Andrew-fj9no 2 роки тому

      @@BeatSonicUS I went to the website and there’s no showing of that camera can you please link me that exact camera thank you

    • @BeatSonicUS
      @BeatSonicUS  2 роки тому

      @@Andrew-fj9no we used this www.beatsonicusa.com/bcam7.html

    • @Ang7.8
      @Ang7.8 6 місяців тому

      @@BeatSonicUScould this be mounted to the rear wheel bracket (if I don’t use the wheel cover)

  • @pudgy_buns
    @pudgy_buns 7 місяців тому

    To me mirroring is a bad choice, as that radio comes with Apple CarPlay which is a far superior option unless i'm misunderstanding how something works.

    • @BeatSonicUS
      @BeatSonicUS  7 місяців тому

      It all depends on individual preference