How to program mag 254 remote | program mag 322 remote | program MAG remote for TV

Поділитися
Вставка
  • Опубліковано 30 сер 2020
  • This video shows how to program #infomir #Mag254W1 #mag254w2 #mag322w1 #mag322w2 #mag256 #mag257 remote controls for powering on or off your TV. You can also program for changing input source of your TV or to mute your TV
    If you are looking for #IPTV connections in #Canada or #USA please visit iptv.royalcomputercare.com
    Video by - Vignesh
    ===
    To watch more videos
    ► Subscribe to our #RoyalDrones​ UA-cam !
    UA-cam - / @royaldrones1
    UA-cam - / @royaldrones
    TikTok: / royaldrones
  • Фільми й анімація

КОМЕНТАРІ • 52

  • @balwindervijun550
    @balwindervijun550 2 роки тому

    Very good information, I was able to program my tv with this info. Thanks 👍

  • @evelynmacabeo5594
    @evelynmacabeo5594 Рік тому

    Thanks alot.

  • @nguyenchanh224
    @nguyenchanh224 3 роки тому

    super

  • @385x01y
    @385x01y 2 роки тому

    Thank you, worked for me

  • @MrCMVikram
    @MrCMVikram 2 роки тому

    Good information. I will try to do the same.

  • @nguyenchanh224
    @nguyenchanh224 2 роки тому

    🤞

  • @childreneducationbd
    @childreneducationbd 3 роки тому

    When I set up my TV remote in the set top box will the TV remote be on or will I be able to work on both the remotes?

    • @royaldrones
      @royaldrones 3 роки тому +1

      Yes. After this operation both the remote works

  • @priclepricle1732
    @priclepricle1732 2 роки тому +3

    Usefull information, that i looked for. Maybe someone will need.
    Reset STB remote to the factory settings
    Press SETUP and OK keys at the same time and hold for 2 seconds. Red LED will blink 5 times. Reset is done (all programmed sections of STB remote is reset).

    • @upauca
      @upauca 2 роки тому +1

      What if SETUP + OK combination key press don't work?

    • @bforu1
      @bforu1 2 роки тому

      Same issue

  • @m00dakas
    @m00dakas 3 роки тому

    Hi, how can i pair them in the different way? I would like to use my samsung tv controller instead of tvip for channels changing or move back/forward video on tv

    • @royaldrones
      @royaldrones 3 роки тому

      Sorry, that is not possible

    • @mayurshah7570
      @mayurshah7570 2 роки тому

      And also, IPTV remote is cheaper then TV remote if it dies. Better to use IPTV remote

  • @trevorrodrigues7140
    @trevorrodrigues7140 3 роки тому +1

    Have you figured out how to get you tube on your mag box

    • @royaldrones1
      @royaldrones1  3 роки тому

      UA-cam should be supported by the TV service you are connected to. Mag Box already has a UA-cam app enabled. You can email me if you are looking for TV service with UA-cam

    • @Vexump
      @Vexump 3 роки тому

      It’s already in there but it’s really garbage

    • @royaldrones1
      @royaldrones1  3 роки тому

      @@Vexump You should understand that UA-cam is IPTV's competitor in the business world. So you will not get the latest UA-cam App in MAG box. I will recommend you go for an android box where app licenses are managed by the Android operating system

    • @Vexump
      @Vexump 3 роки тому

      Royal Drones Nah I wont

  • @harwindersingh4210
    @harwindersingh4210 3 роки тому

    Good video, my remote works fine but the forward and rewind buttons are not responding. The light blinks on the remote and iptv but nothing else happens. I tried rebooting the remote but still nothing improves. Any suggestions?

    • @royaldrones
      @royaldrones 3 роки тому

      Please send an email to info@royalcomputercare.com, we can help you finding a new remote for you

  • @anujshah4675
    @anujshah4675 3 роки тому +1

    Will this work with fire stick?

    • @royaldrones
      @royaldrones 3 роки тому

      This video is about programming a MAG box remote. If you have a programmable remote for Firestick then it will work

  • @nelsonanziani5096
    @nelsonanziani5096 2 роки тому

    Hello, good morning, how can I activate my mag254 infomir?

    • @royaldrones1
      @royaldrones1  2 роки тому

      Visit website at iptv.royalcomputercare.com

  • @amrutamore7074
    @amrutamore7074 2 роки тому

    Is it possible to program the remote without a tv remote?

    • @royaldrones1
      @royaldrones1  2 роки тому

      Not possible without the original TV remote, it is actually a copy functionality which we do during programming.

  • @INDUJAJ01
    @INDUJAJ01 3 роки тому

    Will this work with roku

    • @royaldrones
      @royaldrones 3 роки тому

      Sorry, it will not work with Roku. This is only for IPTV boxes. More info in www.royalcomputercare.com/services/iptv

  • @chrisgandhi6463
    @chrisgandhi6463 3 роки тому +1

    I programed my remote but now my volume is very low. My mag box volume is set at 20 and I can't increase it now. How to reset mag remote

    • @royaldrones1
      @royaldrones1  3 роки тому

      Please send an email to info@royalcomputercare.com

    • @robpole4150
      @robpole4150 3 роки тому +1

      Just press the setup button and OK button at the same time for five seconds. The red light will flash five times fast. Hope that helps.

    • @salem7439
      @salem7439 3 роки тому

      @@robpole4150 thank you very much

  • @records_l4136
    @records_l4136 2 роки тому

    What if my old remote dont work anymore How to programm the new

    • @royaldrones1
      @royaldrones1  2 роки тому +1

      Not possible. But if I where you, I will loan a remote control for the same model TV and do the programming.

  • @rambo3984
    @rambo3984 4 місяці тому

    Why only power and mute?
    What about other functions?

    • @royaldrones
      @royaldrones 4 місяці тому

      Best to match the picture in the remote button to match with function unless you want to prank people. Note: only blue colored buttons are programmable

  • @kamaleshdesai2136
    @kamaleshdesai2136 2 роки тому

    my remote does not work properly. I turn on tv with tv remote then i turn on box remote and try to navigate but tv turns off automatically

    • @royaldrones1
      @royaldrones1  2 роки тому

      I think you have to buy a new TV. There is something wrong the TV that is making it turn off automatically

  • @H4Harshu
    @H4Harshu Рік тому

    my remotes top left button keep blinking green. and not functioning. how to solve this?

    • @royaldrones
      @royaldrones Рік тому

      remove the battery once and keep the battery back, your problem will be solved

    • @H4Harshu
      @H4Harshu Рік тому

      @@royaldrones I tried that but it didn't solve the problem

    • @royaldrones
      @royaldrones Рік тому

      @@H4Harshu Buy a new one either from me or from your seller. My details in my website

  • @raysidal
    @raysidal 3 роки тому

    How do you program remote for tv on mag 420

    • @royaldrones1
      @royaldrones1  3 роки тому

      Mag420 box remote doesn't come with programmable remote. You can email me, I will give you programmable remote

  • @jas3810
    @jas3810 3 роки тому

    Not working please help

    • @royaldrones1
      @royaldrones1  3 роки тому

      Can you please send the photo of your remote to info@royalcomputercare.com. We will take it from there

    • @jas3810
      @jas3810 3 роки тому

      @@royaldrones1 link not opening

    • @royaldrones1
      @royaldrones1  3 роки тому

      @@jas3810 I had shared my email to which you have to sent the photo. Not sure what you meant by 'link not opening'