Had to reattach the door to my glovebox and wanted to confirm how to get this part off safely. This video did the trick, and i was also successful fixing the glovebox. Thanks!
Thank you for the complement! For non turbo cars, you just pull it towards you. For turbo cars, you need to first pull the main cluster a bit and pull the left piece off. Driver side doesnt have any screws.
Thank you very much for the excellent video! It helped me a lot to do it on my Fiat 500. Just a few details were different from my car. Overall, 99% as described in the video. Thanks a lot! Regards.
have you been able to remove them meanwhile? did they damaged anything behind the AC control panel? I dropped two screws and I can't get them out😩😩 Please help
Thank you for watching! For the non turbo cars you just pull it off. And for the turbo cars you need to pull the main cluster little bit first and pull the left piece off. Please note that driver side doesn't have any screws. Hope it helps!
is it the same process with the new edition , 2017 and after ? because with the central control which is now electronic and not manual .. thank you for your return on the subject.
for non turbo, you just pull it off, for turbo cars, you need to pull the main cluster littl bit first and pull the left piece off. driver side doesnt have any screws.
Should re-title this , 'Partial dashboard removal' because it doesn't show about 80% of the work involved in removing the actual dashboard rather than just the facia panel.
so you either remove the center cluster or carefully pull the cluster from where turbo gauge is to make gap. then you will want to pull the left vent piece off. no screws.
Had to reattach the door to my glovebox and wanted to confirm how to get this part off safely. This video did the trick, and i was also successful fixing the glovebox. Thanks!
So glad the video helped ya! Cheers!
Thanks for the video it helped , i used my fingers only on the black control panel with no damage at all.
Tanks a lot, your vídeo help me here in Brazil
Thank you!
Very nice video. What about the small side part on the left?
Thank you for the complement! For non turbo cars, you just pull it towards you. For turbo cars, you need to first pull the main cluster a bit and pull the left piece off. Driver side doesnt have any screws.
@@ChrisParkshooting , thank you very much.
Thank you very much for the excellent video! It helped me a lot to do it on my Fiat 500.
Just a few details were different from my car. Overall, 99% as described in the video.
Thanks a lot!
Regards.
Where did you get that carbon fiber dashboard?
its a CF vinyl wrap. But you should be able to find the real CF dash insert pretty much all over internet. Thanks!
You said you dropped a screw behind the AC control panel. I dropped several light bulbs back there (for the ac control) how would you get back there?
have you been able to remove them meanwhile? did they damaged anything behind the AC control panel? I dropped two screws and I can't get them out😩😩
Please help
Thankyou so much this was so so helpful!
Thanks. And to remove the side corner (left side ventilation) of the dashboard plate ?
Thank you for watching! For the non turbo cars you just pull it off. And for the turbo cars you need to pull the main cluster little bit first and pull the left piece off. Please note that driver side doesn't have any screws. Hope it helps!
@@ChrisParkshooting Thanks much. Regards :-)
is it the same process with the new edition , 2017 and after ?
because with the central control which is now electronic and not manual ..
thank you for your return on the subject.
im not too sure to be honest, but if you are asking for HVAC, its not possible as far as I know.
How did you do to take off de bulbs?
Hi. Do you know if it is possible to drive the car with dash panel removed? Planning on a wrap, but won't be done super quick. Thx
im sure you can do it. you wont have access to sport, hazard and defrost buttons but you can drive without it. good luck!
Thanks plan on doing this but had no idea.
I dropped a screw behind the AC control panel...
Can someone help me? Do I have to worry if it stays in there?😩
thank you, this was very helpful. How do we remove the other small piece on the left side?
for non turbo, you just pull it off, for turbo cars, you need to pull the main cluster littl bit first and pull the left piece off. driver side doesnt have any screws.
How to destroy your dashboard in under 5 minutes. Great video, really.
how would this destroy ?
How do you remove the main dashboard? Is it removable? I need to replace passenger airbag.
thanks
Thanks Chris really good tutorial
Do you have the tutorial for the backup camera? because I want to install one and I don't know how!
thank you...
PS: great video by the way.
its nothing different than other cars. wire should be inside the roof liner and through the corner wire loom.
Thanks so much for the video. Where did you get that dash panel?
Thank you for watching! I wrapped it with the vinyl.
wow...looks good
Very helpfull. Thx alot.
Thank you so much! I was planning on doing a similar wrap too! Looks brilliant, 695 esque! Is that a stock instrument cluster?
Tank you
Thank you very much for the excellent video!!!!!;-)
God you made that first section look hard. Just use your fingernails on your left and right hands simultaneously.
Thank you
That’s not the dash, that’s just a facia trim.
not sure how to do that.. you might want to take it to the shop for it.
Should re-title this , 'Partial dashboard removal' because it doesn't show about 80% of the work involved in removing the actual dashboard rather than just the facia panel.
i have the Abarth
so you either remove the center cluster or carefully pull the cluster from where turbo gauge is to make gap. then you will want to pull the left vent piece off. no screws.
thank you
My husband took if off with his fingers. Not hard at all.
karen shubert assuming you are talking about the climate control plates. its not that hard to do but mine was kinda stubborn.
thanks for watching!
Not everyone has your husband at home ! :-)
Trim removal tools are really cheap
PRY* not “prey”
Thanks! 🤣
"Three screwdrivers," don't you mean screws lol
yes...