SATA JET 5500 X RP DIGITAL 1.2 i Nozzle Spray Gun Review
Вставка
- Опубліковано 14 жов 2024
- Hi guys so this video i will be taking a look at the SATA JET 5500 X RP DIGITAL 1.2 i Nozzle Spray Gun and also comparing it in the ranks of my go to clearcoat guns i have in my collection.
SPRAY GUN DIRECT LINK
spsupplies.co....
If you have any questions feel free to ask away and as in any video i will do my best to answer you all.
I hope you guys enjoy and dont forget to like and subscribe
OUR SPONSORS
spsupplies.co.uk/
sales@spsupplies.co.uk
/ spsuppliesltd
/ spsuppliesltd
/ tonys_refin. .
or like our facebook page
/ tonysrefinis. .
/ tonys_refinish
I got this gun a few days ago. I got the 1.3 I nozzle RP. I laughed after I did a complete last night. No buff. Clear looks flawless.... Absolutely amazing. It's the best gun I've ever used. Hands down
Bro I have a question. I have the sata x5500 1.3 oval nozzle .the set up is 2 turns ..my questions is am I supposed to pull all the trigger down? Half fan width or full fan? I'm getting good finish at half fan at 35 Psi and not pulling the trigger all the way down. In just playing WIth my fingers and my hand. It rare to get runs with this method... But t I'm not sure if I'm doing it right
You should be running full fan , 2.0 bar air pressure and turns depends on your speed as far as fluid goes but I’d personally set it so you pull the trigger fully
Me pasó lo mismo después que había comprado 1.3 i sale el vídeo
Great review Tony, & I can see the results are fantastic so I’ve bought the same setup. Been a SATA user for 30 years since first using a SATAjet 90 in 1990. Looking forward to putting down great clear off the gun. Cheers.
Great vid, don't worry about the video being to long, that's what were here for, keep up the great work,
Thanks man
Hi Tony, looking to buy this, do you think the 1.2 is better for clear rather than the 1.3? Also have you tried solid through it? I do a fair amount of commercial work so wondering if a 1.3/1.4 would suit better? (Separate gun to the clear obviously) any help would be appreciated! I’ve been running my 4400 for a too long now 😂
So do you like it more than your supernova now?
Hey to be honest mate yes , the video for that I shot a few months back like I said in the video and I’ve been using it since for clear ( ws ) but I have to say for me this really does kick it off top spot but then I really do like the satas always have , couldn’t wait to get my hands on the be one to try
@@TonysRefinishingTV nice one, I think I'll have to get one.
Well when you do mate il be watching to see what you think lol
Hey gunny are you here also? Good to see you
@@TheGunmanChannel
remember to buy the nozzle of the satajet right, because in your video you said that the sata 5000 1.2 was bigger than the gti pro 1.3 . which one will you take?
"5500", at first i was thinking of a succesor of the 4400 mini/midi gun.
4000rp/hvlp: full size guns.
4400rp/hvlp: mini/midi guns
5000rp/hvlp: full size guns
5500rp/hvlp: mini/midi guns.
Have you tried iwatta entech base gun? How does that compare to iwatta Extreme spray gun?
Hi Tony IV been spraying since 1979, first spray gun jga devilbliss 30 cap solid then 43 cap base ,so then went to SATA nr95 ,then to SATA 3000 RP O .Then jumped to sagola gto I 1.3 .A ok gun .So at 60 years old I'm looking for a new gun .I'v started to get the odd run here and there 1.3 set up . Looking at this gun in your video ,I think il try 1.2 set up ,at my age so many guns coming out. I do like SATA guns ,the storys i could tell you in the bodyshop make you laugh
That finish off the gun is absolutely stunning !!! 👍
Thanks man
great review. Now that you have had the 5500 RP for a while. Is the 1.2 tip still preferred for your clear coats or would you select the 1.3 if buying today?
still the 1,2 mate
I have been thinking of buying one of these how does it rate as a base coat gun ?
Just one thing I spotted in your technique you spray to the panel joins always been taught to join 6inch away so not to double coat edges to prevent edge popping and runs but great to see the new gun in action is it available in the UK yet ?
Yes I’m in the uk lol , and not always I do spray over the edges a lot but I’ve never had problems with popping or runs on them tbh the time I trigger on and off prevents it along with the gun angle
So what is your set up for this sata, material, pressure, and what tip? 1.2?
Toney Great to see you great job and review can’t wait for the next video
thanks mike and thanks for watching to buddy
Tonys_Refinishing Toney I no what you mean I have been having a rough time myself I just want to leave this with you mate and I really don’t want to offend you but I promise you this and I believe it with all my heart from things I’ve seen lately take whatever it is good or bad to God man go to your mixing room bathrooms or anywhere you and him I promise it will work out and be ok.
Il get there mate one day at a time 👍
Nice video tony. Please tell me your gonna try and get hold of dv1 and do a review on them. Apparently the basecoat option is available to order now or is it now but the clear coat version is to follow
From what I’ve heard the clear version could be middle To end of next year , and if we can get one mate yes il definitely see what I can do as I say my preference will be sata always has but il Always review any gun in an unbiased way for the channel and keep the content mixed for you guys
Brilliant mate. Apparently this new devilviss dv1 is meant to be a game changer better atomization better transfer efficiency. Hey I may even do a review myself although my camera skills and public speaking wouldn't be anywhere near your videos. Who supplies all the guns for you to review or do you have to pay for them out of your own pocket. I have to say I've never really been a fan of sata but this gun looks pretty sick. I was blown away by the review you did on the supernova but this sata looks like it could be a market leader
The supernova review I actually filmed back in July I’ve just been mad busy so not had chance to edit and upload anything and it is a great gun for the money , and yeah I’ve heard that so it’s just a case of we will have to see how it stands up compared to the sata now I think , we are now sponsored by www.pmpsupplies.co.uk they supplied the sata for review for us , prior to this pretty much every gun bar the sagola has been from my own pocket mate which is what’s made it hard to do gun reviews honestly having a family I just can’t fork out £400 here £500 there for a gun just to review but now we have pmp supplies working with us channel wise it gives me a little more scope to add more content for you guys and more regularly too which will be really nice for both viewers and myself but we aren’t paid by them to give good reviews ect all reviews will stay unbiased and honest and that was agreed , that’s what we built The channel on and that’s what it shall remain going forward
Satajet 5500 1,2 RP best Clearcoat Gun ever🥰😍😘
Hello I have the same gun with how much bar do you spray the clear coat?
2.0 bar
Thank you
Thanks for video great spraygun.SATA IS THE BEST!!!
lol thanks buddy
Was that a new transit custom?
In my experience the bumpers on the previous customs are almost textured and makes the paint appear dull.
That corner will be too good if they are still like that.
Nice video by the way 👌
That corner was a perfect factory match match , some do yes we get a lot on that literally look like have been painted direct over the texture of the plastic but this ones Been done properly so it was a lot easier to match
Just bought this same one rp (I) 1.2 hope it sprays as nice for me as it did for you using hs clear ! Great vid pal you sold me
Thanks man and I’m sure it will buddy just take your time dial it in to what works for you and you’ll soon be smashing them out
Yeah it's official been playing with it about a week ,right out the box love this gun clear even shines better believe it or not
Awesome to hear your getting on with it mate they are hands down the nicest clear hun I’ve used
What air caps do they have for this gun to give you flat or peely finishes? Great vids Tony! Your a true gentleman.
I’m using the the i nozzle setup on this that’s the only setup I have and only I will use , I will adjust my spraying style , speed , distance to get the required finish I don’t believe in having a gun that I need multiple caps to do my job with tbh
@@TonysRefinishingTV I nozzle setup? Could you explain a little more for us rookies
Yes the traditional spray gun pattern is an oval shape , the i nozzle is a straighter
Flatter pattern suited a little more to slower application but I finer finish hope this helps
Between you and Gunnie you guys are the best!!!!!!!!!!
Thanks buddy I appreciate that but we’re not to that level yet mate maybe one day but we still have a long way to go
Tony, what gun is your preference Sata 5500 RP or Iwata Lotus.
by lotus i take it you mean ws400, personally i prefer the sata 5500x rp i but this depends on budget that you personally have too, for the price bracket you cant beat the ws400
@@TonysRefinishingTV thanks Tony, i do not know wich to choose between both.
Personally the sata but I love my satas
Magnificent Tony .Dear Tony. that was perfect . I liked it. Thank you 👏👏👍👍🌷🌷
Tony, what are your final setups for air pressure and material knob? 3 turns out (from zero material) on material and 2 bar?
Yes mate but it depends how fast you want to go 2 bar is standard for the pressure , I’ve used it today again with a different clear and found 2.5 turns from closed was good but that was a thinner clear
Perfect. Thank you! Im currently using a 5000 rp 1.3. Three Turns out, and around 25 psi at 6” away from panel. I literally FLY through my clear jobs at lightning speed. It’s nuts! Can’t wait to get a 5500
The i nozzle allows for a slower application than the standard 5000rp so if you
Want to keep the speed of application I’d go for the 1.3 setup , I’ve also got the o setup and both hvlp setups on the way to review soon
Let me know once you've used both the O and I, in the same 1.2 or 3 tip size. The 5500 isn't being released in the US until Oct 31. I have some time still to wait . thanks dude!
Will do mate il do a review on all setups for base and clear
Hi quick question hope someone can help can you spray base coat through the rp I’m going to placing an order soon and didn’t know if you can spray base with it. So I can have the option of spraying clear and base with 5500 x.
Great video Tony !!! Would love to see more on the 5500 !
Do you think the oval pattern would be beneficial for painting something with a lot of inside corners?
honestly both are good its just the shape of the fan pattern no the width ect , you could paint areas like that just by turning the fan down a little and then adjusting the pressure down to suit so you had it more accurate for specific items , wheels for instance i turn my fan down for and drop my pressure slightly to suit there fiddly shape ect
Thanks for the advice and instantaneous reply! I really enjoy your videos, they are very helpful. Have a great day!
and thankyou for watching mate , i always try my best mate to answer every question for you guys takes a while sometimes now were getting so many viewers but i always try
If you spray a HS clear that is about 20-22 sec viscosity...what pressure would you spray that type of clear with?
Honestly mate I’ve never used a viscosity cup for any clear or any other product tbh
@@TonysRefinishingTV :):)...ok...but have you painted with hs clears....they are thick like hell most of em so if you have what pressure do you use on those clearcoats if you have tried them with the x5500?:)
2.0-2.2 bar I found the sweet spot for me with the 5500 tbh mate
Please help (newbie) i have a Sata 5500 x RP „O“
Can i Buy the „I“ set and put it in my pistol ? The „O“ Set is not good for cars and i will buy „I“ but i have no idee can i do switch the „O“ to „I“ or i must buy a new gun ??
the o setup is great for cars tbh so is the i setup i believe you can yes but you need to change eveything , fluig tip needle and aircap
Ordered mine yesterday. Can’t wait
Did you record audio with the mic of your GoPro o or you have another mic?
My GoPro buddy in the booth then a proper mic setup at home for the voice over
hello, what difference did you notice between 5500 rp I nozzle and ws400 1.3 HD for clear. with which is the finish smoother? because you prefer it compared the ws400 1.3 HD. I have a problem with the sound of my cell phone and I can not hear your voice .. LOL
you can get the same finish with either gun tbh i just prefer the way the 5500x feels to spray with , overall it feels like a better gun when your using it in every way
@@TonysRefinishingTV the satajet 5500 against satajet 5000 which is better? Base and clear coat,
i only use this for clear im yet to test the base version but the 5500x for clear by far
@@TonysRefinishingTV hvlp 5500 x for the base coat?
Yes
in fact it is so easy and so efficient to use, that everyone should have at least one, after you use it you no longer want to use any other brand, you give an account of the time and money that you have thrown away in other guns !!!
Honestly I don’t regret any other fun I own I like to mix things up and use all brands especially for videos but for personal preference sata is my favourite
@@TonysRefinishingTV I am radical in the way this SATA 5500 works, the capacity it has and the ease of stretching the clear without sagging forces the other brands to offer us something that resembles, or exceeds, why and after you use it By production versatility and quality of refinish you do not want to use any other brand is a matter of making the work more productive and easy for the maximum result for both large areas and small parts, it is much easier to configure than a WS supernova, and easier to handle than a pro Lite GTI, even beats a walcom carbonium, it remains to see what is going to offer the industry with the new Dv 1?
Where did you hear that the DV1 was going to be in the Sata price range? I am seeing $500 range in USD.
the new dv1 digital which is what i was comparing prices on in the uk the retail is £577 , sata 5500 x digital is £599 so the price is even closer than i first stated tbh
Great review on the SATAjet 5500....looks real nice
Hey man thanks buddy and nice to see you watch too lol , lovely gun mate honestly
Perhaps Sata will drop the price on 5000b rp now ? Great review !
Yeah doubt it 😂
@@TheGunmanChannel I can't wait for your review of the new Sata 5500x rp man !!!
They may a small amount but I can’t see it tbh
I may have a 5000b digital 1.2rp for sale soon if you're interested? bought in June brand new has been used every day so has some wear and tear marks on the body but other than that is in mint condition
@@xiG0DSB3A5Tix thanks for the offer ! My GPI is still going strong after 2 years so I have no need as it lays down high solids clear effortlessly. Cheers !
Nice job what’s clear u r use it ???
I’m afraid I can’t say which clear this is yet that I’m using as it’s a new one I’m trying out
Tonys_Refinishing I use yesterday clear it’s amazing layout shiny is perfect 👌 same like PPG 530 and price is cheap my friend he use it from one year still shiny and glass price about 150 Canadian dollar mix 2 -1
can you also use it for the base coat whit 1.2 ?
Yes you could
Do you use sealer before basecoats im getting fisheyes any tips brotha???
No I don’t use sealer , apply your base very light to start and then it wetter coats on or try and find the cause of the fisheyes , airline regulator , airlines clean ect ect
@@TonysRefinishingTV thanks
I'm arguing with myself about buying 1 (if not 2) obviously I'm going to get a rep to come in for a demo but is it really that much better than the 5000? I have 3 so don't need the 5500 but my heart is longing for it 😂
in my opinion yes alot better than the 5000 tbh
@@TonysRefinishingTV cheers, I couldn't fault the 5000 So was hard to see how they'd improve it much! Will look into selling 2 to make room for the 5500s then
I’m the same mate my 5000 was one of my favourites but this has taken too spot overall for me and I’ve got a lot of clear guns lol
Do you try this spray gun with metallics base coat?
There is another video using the basecoat version of this gun on the channel mate
thanks for sharing! it's very good to see you again!
Thanks buddy
How much did you got the gun. Bro?
Do you think this is better than the Sagola 4600 extreme ?
Honestly mate no I think the aroma for me feels like it had a lot more control
@@TonysRefinishingTV You mean the Sagola Tony ?
Yep sorry autocorrect lol
@@TonysRefinishingTV lol …. Thoughts so bud haha
Still yet to try a Sata keen to see if they top my pro lite in my hands. Mmm apprenticeship wages cant afford one yet lol
Lol 😂 we all started somewhere buddy it’s only been these past few years I’ve been able
To get one till then I made do with what I could afford and built up as I went
True true. Thanks keep up the good work mate
Thanks Alan you too buddy
good video been a while keep them coming
Thanks Paul and sorry I’ve been really busy with the day job and the business to so I’ve had little time for editing ect but il make sure we get regular videos up From now on
Best paint gun ever!
Tony question
I was recommended this gun 1.2 I rp digital
Ive had it for 2months now
Im not a sata guy
What do you spray clear at ive tried 30psi down to 27psi
What do you set your material control at?
Thanks in advance
Hi mate id go 2.0 bar and try full fluid but usually im around 3-4 turns out fluid wise and full fan
@@TonysRefinishingTV thanks
I spray ppg water with the dv1 and use 8152 ppg clear
Still getting use to the sata5500 which i use just for clear
It’s a very nice fun for clear mate I find the satas just take a tad more time to get to grips with than others but once you’ve got it dialled into what suits your style it’s very good indeed
Love the overspary from sata
Lol random one that mate
Tonys_Refinishing try it too air gunsa aze htes impact 1.3 is very good gun for clearcoat!!!
i will see if i can find one to use and trial
Do you apply hs clear with devilbiss GTI pro lite t110 haircap?
Yes for me I prefer that cap
bro can you recommend me a really good clear laquer.
high build primer and body filler please reply much appreciate.
were are you from
@@TonysRefinishingTV I'm from Burnley bro near Blackburn, Preston
ok so your in the uk thats good lol, really good clear for you i use kapci 6030 hs clear alot its a dam good quality clear buddy, then churchill or kapci high build primer very good for the cost and we use proworks swift filler and proworks silk finishing filler, the clear and primer can be bought from www.advancedpaints.co.uk and the filler just search on ebay buddy or ask your local factors
@@TonysRefinishingTV wicked thanks a lot man really appreciate your help
my pleasure budy always here to help viewers
Will the nozzle and air cap fit the 5000rp?
No it’s not interchangeable, the nozzle tip and cap are different so are the internal
Sizes and threads on the new gun
Please tell me why everyone's blends the c post into the roof side rail when it takes no time at all to prep and paint the complete side of the roof and a post. There is nothing more annoys why spend time polishing a blend that isn't necessary
ask my boss at the time
A combien de pression vous vernissez ?
cual es la regulacion de la pistola en este video
Maybe for base it will be good too? ✌️
Hvlp 1.3 i is the one for base 👌
Great review I used to be devilbiss all the way but these sata n iwata are awesome guns prefere these now
Lol it’s nice to have someone comment that agrees with me lol , and so did I mate I was always devilbiss and I’m not knocking there guns but in a straight shoot out for the same money I’d pick sata straight out
@@TonysRefinishingTV they are all great guns just down to personal preference
that is very true mate
@@TonysRefinishingTV The only solution I see is to own a 5500x rp , a Supernova, and a Pro Lite ! : )
Lol that’s one way to do it I suppose and I have got all three so I’m safe lol 😂
I do love my sata 5000brp, I'm sure I'd love that 5500 too though haha, Nice finish man 😎
thanks mark and thanks for watching too, and yes if you like the 5000rp youl love the 5500 x
Ótima ferramenta e com boa aplicação
What’s different between 0 nozzle tip and I nozzle tip?????
The o nozzle is more of a conventional data pattern , The i nozzle is a flatter fan pattern like the iwata Ws 400
Thanks 🙏🏻
What is best gun for silver basecoats ????
The bellairia is good and so is the ls400
@@TonysRefinishingTV what cap/nozzle set up on the bellaria do you use?
I’m not sure what it is mate tbh it’s the 1.3 on my bellairia not sure which air cap though
You don't blend in or burn in your clear?
Yes just most of the time ive switched the camera off when ive finsihed the clear stage tbh
Is this gun really slow at clearing
No it’s as fast as you set it to
Well done .perfect mirror finish .Nice video bro .
thanks man
hameed ,yeah,I agree
Thanks buddy
Great video Tony thnx buddy
your welcome buddy
what satas do you have ?
I have the 3000hvlp , 4400 rp for small work , blow ins ect, the 5000rp and now the 5500x
At what PSI do you shoot your clear with?
29psi , 2.0 bar , through most of my guns tbh or 1.8 bar for thinner clearcoats
I see, I just pre ordered the gun and it’ll be here in a couple of weeks, same set up as you so I’m excited to see it in use, what kind of clear did you use in the video? Nice shooting by the way 🤙🏻
And what did you mean when you said you should have done 3 turns out on the fluid?
Was a high end uhs clear but I can’t say what I’m afraid I’m not allowed to yet , if I had been a little braver and gone 3 turns or more it would have been a lot quicker and a lot wetter but most of time I prefer to spray in a controlled way so I can adjust the paint lay down to the finish I’m looking for off the gun
Now what do you use the same pressure for your sealer and base as well?
Thank you ^^
Sata 5500x good gun !!
Awesome job and video 👍👍👍👍👍👍👍👍👍👍
Thanks man glad you enjoyed f
How many pressure pounds is 2bar ??? 22 psi ???
Nope 29
Lol got there before me 👍
@@TonysRefinishingTV thanks
Yea, new video!
lol yep plenty more to come too chris il be doing atleast one a week if not more if i get the spare time, thanks for watching buddy
Glass look..!! Yeah...but expensive.. Better devilbiss #1:)
Yes expensive but the new dv1 is only £40 cheaper so for me I’d rather spend that £40 extra and have the sata , and believe me I’m not saying devilbiss aren’t good guns but for the same price pretty much I’d be choosing the sata over the dv1
@@TonysRefinishingTV the digital version is up there but I think the non-digital is still way cheaper than SATA. Bolt on a cheap cheater valve and you're off.
50£ can play a game ???
Can you just change the air cap
they are a nozzle set i think mate so fluid tip, needle, and air cap
Def agree the WS400 is cabbage IMO + rly doesnt do anything the LS entech cant do.
tu cabina tiene aspiración
looks more simple and comfortable .Great!
It’s a lovely gun mate
How much is it American dollars ?
im not sure mate but if you contact www.pmpsupplies.co.uk they ship worldwide
Cheers
but you missed the same spot twice on the passenger side 👨💼
Everything atomizes at 2.4 bar! You said you were spraying at 2 bar. The digital meter on the gun shows 2.4. lol
no it didnt think you need glasses lol
you can see it shows 2.0
P1colourPro look at the time 3:02.
@@crystalcoating6459 hes right! You can clearly see 2.4 on the gun, and thats with the trigger pulled!
Salam dari indonesia
Супер!👍
5500x i 1.3 노즐 = 슈퍼노바와 유사 함 0 노즐이 기존 5000b 와 같음
Вот это слой. А не то что у нас 3 микрона брызнут
Как думаешь не маленькая дюза под лак. Кладёт конечно очень ровно но продавит ли UHS?
How much did SATA pay you for telling all them lies
We do not get our products from sata , we don’t have any affiliation or sponsorship from sata nor do I get paid by sata or anyone else for making videos for that matter