Su gorro sanitario es fácil de hacer. Yo he hecho otros modelos y nunca como este. No soy costurera profesional pero este me lo pude aprender enseguida. La felicito por su instrucción y su simpatia
Por suerte te encontré jejejej, estaba buscando como Loca un estilo fácil de hacer un gorro y este es genial , y muy bien explicado muchísimas gracias 😊
Mil Gracias Ana.Hice uno para mi hija que es médico le encantó.Las medidas y patrones de aplaudir y excelentes pasos.resultados felices.Lluvia de Bendiciones.
Me encanto, que proyecto mas hermoso, práctico y muy bien explicado, lo voy a llevar a la práctica ahora con el virus es fantástico, ricas bendiciones y gracias por compartirlo.
I made this and I don’t even understand Spanish! Your explanations are so great even someone who doesn’t speak your language can understand! They turned out beautiful!
Surgical cap with adjustable ties by Ana Leal (translated by Margy Torres) Conversion to inches is approximate. The whole numbers of the metric system are very easy to follow and more consistent. However as requested here is the pattern and instructions in English. Creating the pattern and cutting Crown: She shows one quadrant of the crown at 10 cm (4”) by 12 cm (4-3/4”) because that is all that fits on printer paper. The final shape is an oval and the size is 20 cm (8”) side to side by 24 cm (9-1/2”) front to back. Brim: She used a rotary cutter and mat to get the brim sized easily. However it can be drawn out and cut with a scissor. The brim size is 70 cm (27-1/2”) by 25 cm (9-3/4”). Ties: 2 pieces of 37 cm (14-1/2”) by 4 cm (1-3/4”). Sewing instructions: 1. Make the TIES using the ½ and ½ folding method. Sew the long edge; can leave one end open but finish one end by tucking it in and back stitching, since this will be seen. 2. Zig-zag along the cut edges of the two short ends of the BRIM piece to prevent fraying. 3. Place the BRIM, right sides together, sew from the top down 4 cm (1-3/4”), and back tack. Sew again from the bottom up 4 cm (1-3/4”) and back tack. This leaves a 21 cm (about 8”) opening. 4. Press open the seam, including the open area. 5. Bring the lower edge up to the upper edge, starting with the seam that was just created in step 4. Fold the entire BRIM so that the right side is facing both toward you and the interior, creating its own lining. Iron the lower edge and the open slit which is the back. 6. Place the ties at the lower edge through the opening in the back. She places the unfinished edge of the tie at approximately 10 cm. (4”). Do the same on the opposite side with the other tie. Sew the ends of the tie in place. She later explains that the placement is individualized so for a smaller head the end of the tie can be placed at just more than 10 cm or more (4” or more). 7. Create a casing for the tie that does not sew the tie down at any point so that it remains free to be pulled and adjust. 8. She continues the sewing line of the casing around the brim. 9. Topstitch at the opening in the back to the top edge. 10. Long stitch along the upper edge so that it does not separate as you attach the crown. Crown 1. Find the front center of the crown and pin right sides together, all around the top. If the crown is slightly larger you might need to do a small pleat or ease the material. Finished
Gracias Ana. Ya lo hice y me quedó perfecto!. Es el segundo proyecto que realizo siguiendo tus tutoriales y el acabado de las piezas es impecable. Saludos desde mi encierro en Caracas- Venezuela
Muchas gracias Ana, me encanta como lo explicas, viene muy bien para para estos momentos de encierro. Saludos desde canaria y un abrazo para todo el mundo, bendiciones.
Yo la encontre el año pasado, hice.para mi y es mi gorro preferido, hice también para otras personas y son clientes satisfet.. eres muy querida, y tierna. Te saludo desde Panamá.
Desde panama la Saludo hoy miercoles 29 de julio 2020 en plena cuarentena y confinamiento domiciliario por ser mayor de 60 años. La Felicito Ana, excelente tutorial muy bien explicado. Con toda claridad. Muchas gracias. Hare varios para mi y las mujeres de mi familia.
Hola Ana. Perfecto, yo le he añadido a la altura de arriba de las orejas, un botón de cada lado para sujetar la mascarilla y a quedado perfecto‼️👍🏼 muchas gracias 😘
Justo me apareció este tutorial mi hija me pidió que hiciera para su trabajo y nunca e echo ninguno ahora lo voy a hacer muy bien explicado muchas gracias
Hermosa señora. Permitame decirle que he seguido sus instructions y me han quedado PERFECTAS! 👌👍👏👏👏👏 Reciba un saludo desde mi México Lindo y Querido, hasta la madre patria España 😘
Hi, I don't speak Spanish and I was able to follow along and make this cap. Nurses love it. All I had to do was convert centimmeters to inches! Gracias!
He hecho varios para regalar a sanitarios. Yo soy de cabeza pequeña así que quité medio centímetro a cada lado de la parte ovalada. El rectángulo lo hice de 25x66. Así me lo ajusto mejor. Por si a alguien le ayuda. Gracias por compartir
Gracias por compartir! Se me ocurre que si el paso inicial se hace dibujando encima de un papel doblado en 4, al cortar ya tienes la base del gorro del tirón (o doblar la tela en 4 y hacerlo también directamente)
Muchas gracias Ana, queda perfecto, me pongo manos a la obra, soy sanitaria y me vendra genial, podrias hacer un gorro de cirujano para hombre? muchas gracias.
Muchísimas gracias Ana, por compartir paso a paso es la segunda prenda que hago y me quedo perfecta, soy primeriza en esto, pero tú lo explicas tan bien, saludos
Ana eres lo máximo .me encanta tus instrucciones ya hice el gorro. Quedo ideal. Soy enfermera y los utilizó mucho. Mil gracias. Fiel seguidora. Desde Houston Texas
Thank you for this visually explicit tutorial. By watching it muted I am confident I can make this cap. A wonderful pattern you have shared with the viewers.
Muchas gracias guapa x enseñar lo bueno q tienes x q gracias a ti puedo coser gorros para mi hermana q trabaja en un hospital y lo mas importante es q lo explicas muy muy bien q eso es importantísimo.gracias👍
@@jeanmariemissale5663 An inch is equivalent to 2.54 cm. Materials: 30 cm of fabric = 11.811 ” -Fabric for the pattern for the upper part. -Side fabric of 70 x 25 cm. = 27.55 "x 9.84" -2 pieces of 37 x 4 cm for the bias = 14.56 "x 1.57" -mark 10 cm to make the casing = 3.93 ' - casing is 1.5cm = 0.59 " You can use translate.google.com/ to translate what you don’t understand. You can use google search to convert measurements. In this case, simply write in google search “cm to inches.” A conversion chart will appear where you can write whatever number you wish.
Ana: I hope this helps you get the word out about your wonderful and easy surgical cap. Surgical cap with adjustable ties by Ana Leal (translated by Margy Torres) Conversion to inches is approximate. The whole numbers of the metric system are very easy to follow and more consistent. However as requested here is the pattern and instructions in English. Creating the pattern and cutting Crown: She shows one quadrant of the crown at 10 cm (4”) by 12 cm (4-3/4”) because that is all that fits on printer paper. The final shape is an oval and the size is 20 cm (8”) side to side by 24 cm (9-1/2”) front to back. Brim: She used a rotary cutter and mat to get the brim sized easily. However it can be drawn out and cut with a scissor. The brim size is 70 cm (27-1/2”) by 25 cm (9-3/4”). Ties: 2 pieces of 37 cm (14-1/2”) by 4 cm (1-3/4”). Sewing instructions: 1. Make the TIES using the ½ and ½ folding method. Sew the long edge; can leave one end open but finish one end by tucking it in and back stitching, since this will be seen. 2. Zig-zag along the cut edges of the two short ends of the BRIM piece to prevent fraying. 3. Place the BRIM, right sides together, sew from the top down 4 cm (1-3/4”), and back tack. Sew again from the bottom up 4 cm (1-3/4”) and back tack. This leaves a 21 cm (about 8”) opening. 4. Press open the seam, including the open area. 5. Bring the lower edge up to the upper edge, starting with the seam that was just created in step 4. Fold the entire BRIM so that the right side is facing both toward you and the interior, creating its own lining. Iron the lower edge and the open slit which is the back. 6. Place the ties at the lower edge through the opening in the back. She places the unfinished edge of the tie at approximately 10 cm. (4”). Do the same on the opposite side with the other tie. Sew the ends of the tie in place. She later explains that the placement is individualized so for a smaller head the end of the tie can be placed at just more than 10 cm or more (4” or more). 7. Create a casing for the tie that does not sew the tie down at any point so that it remains free to be pulled and adjust. 8. She continues the sewing line of the casing around the brim. 9. Topstitch at the opening in the back to the top edge. 10. Long stitch along the upper edge so that it does not separate as you attach the crown. Crown 1. Find the front center of the crown and pin right sides together, all around the top. If the crown is slightly larger you might need to do a small pleat or ease the material. Finished!
Me encanta como lo has hecho.... Yo los he hecho y además le he forrao la cabeza también ... Dsd q busqué como hacerlo y encontré el tuyo fue el mejor... Habré hecho ya mas de 100 gorritos... Con ese frunce me distes idea para cerrarlo completamente y ponerle uns goma ancha... Y son comodos para ponertelos.. Así q muchisimas gracias x tu buena explicación... super bien y quedan monisimos... Muchas gracias😘
Please can someone help translate this to english?🙏 I’m a nurse on a covid floor and want to make this for my coworkers, but I don’t understand all of the instructions :(
Side piece of 70 x 25 cm and for the cord 2 pieces of 37 x 4 cm. Very useful for many jobs, toilets, clerks, cooks, butchers, fishmongers, cleaners. Also for people who are undergoing cancer treatments. To protect us from contamination and bacteria and viruses. And for the pleasure of wearing it. You have the Pattern by clicking here: https: //drive.google.com/open? Id = 1J49 ... Fabrics in my online store analealpatchwork.com Subscribe and press the bell and so we keep in touch
Lo mejor de lo mejor en la pandia he hecho al rededor de 800 gorros y todos genial a todo el mundo le keda genial muchas gracias por darme tu idea y haber hecho felices a muchas gente con estos gorros en Mentos tan duros k no había de nada mil gracias desde Cáceres
Gracias bella dama , como dicen el arbol se conoce por sus frutos. Su explicacion es muy clara los cortes quedan perfectos le digo que ni un solo alfiler use y de una me confeccione 4 y mi esposo dijo quiero uno , mi hija y yo nos miramos sorprendidas.
Ana ya estoy en tu canal me encanto tu gorro quirúrgico voy a hacer uno pues mi hija trabaja como enfermera en terapia intermedia y nesecita varios gorros y ese que hiciste me encanto y fácil de hacer no soy muy buena en la costura pero lo intentare te escribo desde EU de la Florida ciudad de Pompano y explicas maravillosamente bien un cariño que estemos bien y a cuidarnos mucho😘
Mil gracias por compartir tus conocimientos, gracias a este video he podido hacer gorros para vender, no se mucho de costura pero son muy facil de hacer con ese paso a paso qué nos das, Bendiciones. ❤
Excelente mejor explicado imposible, muy fácil hasta lo podemos hacer a mano y las medidas perfectas a cualquier persona la queda porque es ajustable, muchas gracias y bendiciones desde Venezuela
gracias se lo agradesco mucho pues tenia que hacerle uno a mi hija que trabaja en una drogueria y por la situacion que estamos pasando se lo exigen bendiciones y me suscrtbo a su canal
Hola, soy Loli, gracias por el tutorial. Me ha venido fenomenal porque he hecho varios para mi hija y sus compañeras del hospital para que no se toquen el pelo cuando se cambian el epi
felicitarte por tu bloc , me encanta ver tus vídeos y decirte que he hecho el gorro de sanitario y me ha quedado perfecto , siempre gracias a tus explicaciones .un saludo
Una maravilla como explicas!!! Hice un bolso hace dos años sin saber nada de costura con un video tuyo...ahora voy a confeccionar esta gorra!!! Gracias infinitas desde Montevideo Uruguay
Muchas gracias sra Ana me parece muy fácil lo boy a practicar me parece muy práctico cdo lo elabore se lo muestro desde Colombia Sta Marta Magdalena felicitaciones
Ahora REBAJAS en analeal.com
Bendecido día no veo las medidas?
Acabo de hacerle uno a mi hermana que es nutricionista y me quedo muy bien. Muchisimas gracias por el tutorial.
1,
Señorita Ana me gusta sus enseñanzas e aprendido mucho, le agradezco por sus tutoriales. Que DIOS me la Bendiga. Cuidese.
muchas gracias por tu tutorial; Tengo que hacer 30 piezas esta semana para el personal de enfermería cerca de mi casa, en el norte de Francia.
A cuanto los cobras?yp tmb tengo quiere hacer varios.
@@edgarxx1125 yo los vendo en 5 mil los hago flexible si 👍
Su gorro sanitario es fácil de hacer. Yo he hecho otros modelos y nunca como este. No soy costurera profesional pero este me lo pude aprender enseguida. La felicito por su instrucción y su simpatia
Por suerte te encontré jejejej, estaba buscando como Loca un estilo fácil de hacer un gorro y este es genial , y muy bien explicado muchísimas gracias 😊
Con qué claridad y con qué dulzura explica!! Me salvó su vídeo!! Es justo lo que necesito!! Muchísimas gracias!!!
Muchas Gracias! Me encanta tu voz y lo haces fácil, el gorro me quedo chulisimo y profesional ☺️😘
YA HICE MI GORRO , ME QUEDO CHULI CIMO, GRACIAS POR LA EXPLICACION TAN BUENA QUE HICISTE , HASTA EL PROXINO
Muchas gracias por tu idea. Mi grupo de costura estamos haciendo para nuestro Centro de Salud y les estan siendo muy utiles. 😘😘😘
Gracias por compartir. Para los tratamientos oncológicos no es tan fácil encontrarlos. Gracias por tu generosidad.
Hola Ana, lo he hecho y me ha quedado perfecto, mañana lo estreno, trabajo en un hospital. Un abrazo desde Badajoz
Gracias por compartir sus conocimientos...Dios la bendiga.Saludos desde Honduras 🇭🇳
Muchas gracias!!! Estamos haciendo gorros con su ayuda para hospitales en Yucatán, México. Le mandamos bendiciones y mil gracias!!
Hola una pregunta cuanto es la medida de la pieza grande la tira larga gracias
Muchas gracias
@@isabelbatista1200 Hola! disculpa que no es para mi la pregunta , la medida es de 70 x 25
@@mariagarmendia5192 muchas gracias y bendiciones
Mil Gracias Ana.Hice uno para mi hija que es médico le encantó.Las medidas y patrones de aplaudir y excelentes pasos.resultados felices.Lluvia de Bendiciones.
Mil gracias! un tutorial muy adecuado para este momento.
Excelente, bien explicado lo pondré en práctica.
Bendeciones desde Colombia.
Grasias me gusto tu explicación es perfecto me en bulla do aser un gorro 🎩
Con diferencia es el mejor, menos complicado, mejor explicado. Un 10.
Muchas gracias
he visto varios tutoriales pero en los dos que he visto hasta ahora son de ud y me quedan tal cual perfecto buena explicacion
Muchas gracias por enseñarnos este tipos de gorros para la sanidad yo he colaborando un poco está muy bien explicado té pongo un 10
Me encanto, que proyecto mas hermoso, práctico y muy bien explicado, lo voy a llevar a la práctica ahora con el virus es fantástico, ricas bendiciones y gracias por compartirlo.
Excelente yo ya lo hice dos veces me quedo precioso ,muchas gracias por la explicación
Excelente trabajo. Usted es muy buena maestra..Dios la bendiga.
I made this and I don’t even understand Spanish! Your explanations are so great even someone who doesn’t speak your language can understand! They turned out beautiful!
P
What are the measurements of the circle cut in four
Surgical cap with adjustable ties by Ana Leal (translated by Margy Torres)
Conversion to inches is approximate. The whole numbers of the metric system are very easy to follow and more consistent. However as requested here is the pattern and instructions in English.
Creating the pattern and cutting
Crown: She shows one quadrant of the crown at 10 cm (4”) by 12 cm (4-3/4”) because that is all that fits on printer paper. The final shape is an oval and the size is 20 cm (8”) side to side by 24 cm (9-1/2”) front to back.
Brim:
She used a rotary cutter and mat to get the brim sized easily. However it can be drawn out and cut with a scissor. The brim size is 70 cm (27-1/2”) by 25 cm (9-3/4”).
Ties:
2 pieces of 37 cm (14-1/2”) by 4 cm (1-3/4”).
Sewing instructions:
1. Make the TIES using the ½ and ½ folding method. Sew the long edge; can leave one end open but finish one end by tucking it in and back stitching, since this will be seen.
2. Zig-zag along the cut edges of the two short ends of the BRIM piece to prevent fraying.
3. Place the BRIM, right sides together, sew from the top down 4 cm (1-3/4”), and back tack. Sew again from the bottom up 4 cm (1-3/4”) and back tack. This leaves a 21 cm (about 8”) opening.
4. Press open the seam, including the open area.
5. Bring the lower edge up to the upper edge, starting with the seam that was just created in step 4. Fold the entire BRIM so that the right side is facing both toward you and the interior, creating its own lining. Iron the lower edge and the open slit which is the back.
6. Place the ties at the lower edge through the opening in the back. She places the unfinished edge of the tie at approximately 10 cm. (4”). Do the same on the opposite side with the other tie. Sew the ends of the tie in place. She later explains that the placement is individualized so for a smaller head the end of the tie can be placed at just more than 10 cm or more (4” or more).
7. Create a casing for the tie that does not sew the tie down at any point so that it remains free to be pulled and adjust.
8. She continues the sewing line of the casing around the brim.
9. Topstitch at the opening in the back to the top edge.
10. Long stitch along the upper edge so that it does not separate as you attach the crown.
Crown
1. Find the front center of the crown and pin right sides together, all around the top. If the crown is slightly larger you might need to do a small pleat or ease the material. Finished
Muy bonito el gorro. Gracias por el patrón y las explicaciones. Ya lo he hecho, espero que le guste a la chica a la que se lo voy a regalar.
Hice el mío, quedo maravilloso muy fácil y super mega bien explicado eres genial cariños desde Chile 🇨🇱
Muchas gracias. Muy lindo. Es el mejor diseño que he visto hasta hoy. Lo digo con mucho respeto.
Gracias Ana. Ya lo hice y me quedó perfecto!. Es el segundo proyecto que realizo siguiendo tus tutoriales y el acabado de las piezas es impecable. Saludos desde mi encierro en Caracas- Venezuela
a mi me gustó muchos el gorro está muy lindo yo quería un gorro así muchas gracias por compartir excelente persona qué tenga buenas tardes
Genial cómo explica, ya hice varias cofias utilizando y combinando retazos de telas. No he encontrado mejor video que este. Felicitaciones!!!!!!
Hice el gorro quedo muy chulo. Y muy sencillo. Ahora hace falta una bolsita para ello.. Gracias simpática me lo paso genial con tus tutoriales
Muchas gracias Ana, me encanta como lo explicas, viene muy bien para para estos momentos de encierro. Saludos desde canaria y un abrazo para todo el mundo, bendiciones.
Gracias por tu trabajo y simpatia
Yo la encontre el año pasado, hice.para mi y es mi gorro preferido, hice también para otras personas y son clientes satisfet.. eres muy querida, y tierna. Te saludo desde Panamá.
felicitaciones, un trabajo genial muy bien explicado ,agradecida
Desde panama la Saludo hoy miercoles 29 de julio 2020 en plena cuarentena y confinamiento domiciliario por ser mayor de 60 años.
La Felicito Ana, excelente tutorial muy bien explicado. Con toda claridad. Muchas gracias. Hare varios para mi y las mujeres de mi familia.
Muchas gracias. Que todo vaya bien!
Hola Ana. Perfecto, yo le he añadido a la altura de arriba de las orejas, un botón de cada lado para sujetar la mascarilla y a quedado perfecto‼️👍🏼 muchas gracias 😘
Qué buena idea
Salidos. A que distancia del centro desde la frente lo colocaste ?
Felicitaciones excelente excelente excelente explicación. Gracias saludos cordiales desde Venezuela, DTB grandemente 💙💙🙏😇
Justo me apareció este tutorial mi hija me pidió que hiciera para su trabajo y nunca e echo ninguno ahora lo voy a hacer muy bien explicado muchas gracias
Hermosa señora. Permitame decirle que he seguido sus instructions y me han quedado PERFECTAS! 👌👍👏👏👏👏 Reciba un saludo desde mi México Lindo y Querido, hasta la madre patria España 😘
Hi, I don't speak Spanish and I was able to follow along and make this cap. Nurses love it. All I had to do was convert centimmeters to inches! Gracias!
He hecho varios para regalar a sanitarios. Yo soy de cabeza pequeña así que quité medio centímetro a cada lado de la parte ovalada. El rectángulo lo hice de 25x66. Así me lo ajusto mejor. Por si a alguien le ayuda.
Gracias por compartir
E podrías mandar tu molde a mi correo amiga?
Hola buenas tardes saque el patron y es inmenso el lateral. Me medi la cabeza y mide 58cm
El rectángulo de cuanto te quedó? Xfa
Le quité esas medida para la cabeza más pequeña y queda excelente
No
Hola profe ya lo hice.fue un éxito...muchas bendiciones para usted.desde Venezuela...
Me encantó este modelo, haré una brigada para compartir ...
Muchas gracias, por tu excelente explicación sobre el gorro para diversas actividades , desde Rep. Dominicana
Muy lindo! Muchas gracias, que Dios te bendiga siempre.😍
Muchas Gracias 💐💐por compartir, es la mejor explication que encontre en UA-cam🌹😊🌻🌺🌷
Gracias por compartir! Se me ocurre que si el paso inicial se hace dibujando encima de un papel doblado en 4, al cortar ya tienes la base del gorro del tirón (o doblar la tela en 4 y hacerlo también directamente)
Si, claro, tienes razón.
Olivia Quintero, porque no haces un vídeo, creo que lo explicarías mejor jaja, Abracitos!!!!
Gracias Ana , he aprendido varias cosas contigo.explicas muy bien.
Saludos desde Chile
Muchas gracias Ana, queda perfecto, me pongo manos a la obra, soy sanitaria y me vendra genial, podrias hacer un gorro de cirujano para hombre? muchas gracias.
Este vale para hombre y para mujer al tener regulador se ajusta.
Muchas gracias desde Barcelona . Lo explicas muy bien .
Excelente ,muy buen trabajo lo hice y cada día me sale mejor .de Argentina saludos
Muchísimas gracias Ana, por compartir paso a paso es la segunda prenda que hago y me quedo perfecta, soy primeriza en esto, pero tú lo explicas tan bien, saludos
Gracias
Ana eres lo máximo .me encanta tus instrucciones ya hice el gorro. Quedo ideal. Soy enfermera y los utilizó mucho. Mil gracias. Fiel seguidora. Desde Houston Texas
Estamos lejos. Yo estoy en Granada España. Un saludo cordial
Thank you for this visually explicit tutorial. By watching it muted I am confident I can make this cap. A wonderful pattern you have shared with the viewers.
Muchas gracias Ana me ha servido de mucha ayuda tu vídeo ....echo 8 gorros sanitarios todo un éxito!!!!
ME ENCANTO MUCHÍSIMAS GRACIAS EXCELENTE EXPLICACION.
Muchas gracias guapa x enseñar lo bueno q tienes x q gracias a ti puedo coser gorros para mi hermana q trabaja en un hospital y lo mas importante es q lo explicas muy muy bien q eso es importantísimo.gracias👍
me encantó, lo voy a confeccionar ,esta muy bien explicado.
Cuanta tela dentra en ese gorro
lindo y la explicación muy clara.Gracias👍👏👏👏
Saludos desde COLOMBIA
Thank you so much.I did it! Looks good!
La felicito por la buena explicación del molde del gorro me encanta ese gorro saludos des de El Salvador
Además eres muy linda y simpática.
Me encantó tu video tutorial. Super fácil de hacer. Mil gracias!!! Rezando por España...saludos desde Miami!
Fantastic! Exactly what I was looking for...easy instructions and no elastic. Praying for Spain...rezamos por España!
Muchas gracias
Margy Torres I do not understand Spanish . I love the pattern but need the measurements in English and centermeters converted to inches !
Margy Torres can you help me ! My email is mlucky113@gmail.com
Any measurements in english please.
@@jeanmariemissale5663
An inch is equivalent to 2.54 cm.
Materials: 30 cm of fabric = 11.811 ”
-Fabric for the pattern for the upper part.
-Side fabric of 70 x 25 cm. = 27.55 "x 9.84"
-2 pieces of 37 x 4 cm for the bias = 14.56 "x 1.57"
-mark 10 cm to make the casing = 3.93 '
- casing is 1.5cm = 0.59 "
You can use translate.google.com/ to translate what you don’t understand.
You can use google search to convert measurements. In this case, simply write in google search “cm to inches.” A conversion chart will appear where you can write whatever number you wish.
Hola gracias por tu trabajo el gorro quirurgico lo e echo más de veinte veces y los e regalado gracias Ana
Ana: I hope this helps you get the word out about your wonderful and easy surgical cap. Surgical cap with adjustable ties by Ana Leal (translated by Margy Torres)
Conversion to inches is approximate. The whole numbers of the metric system are very easy to follow and more consistent. However as requested here is the pattern and instructions in English.
Creating the pattern and cutting
Crown: She shows one quadrant of the crown at 10 cm (4”) by 12 cm (4-3/4”) because that is all that fits on printer paper. The final shape is an oval and the size is 20 cm (8”) side to side by 24 cm (9-1/2”) front to back.
Brim:
She used a rotary cutter and mat to get the brim sized easily. However it can be drawn out and cut with a scissor. The brim size is 70 cm (27-1/2”) by 25 cm (9-3/4”).
Ties:
2 pieces of 37 cm (14-1/2”) by 4 cm (1-3/4”).
Sewing instructions:
1. Make the TIES using the ½ and ½ folding method. Sew the long edge; can leave one end open but finish one end by tucking it in and back stitching, since this will be seen.
2. Zig-zag along the cut edges of the two short ends of the BRIM piece to prevent fraying.
3. Place the BRIM, right sides together, sew from the top down 4 cm (1-3/4”), and back tack. Sew again from the bottom up 4 cm (1-3/4”) and back tack. This leaves a 21 cm (about 8”) opening.
4. Press open the seam, including the open area.
5. Bring the lower edge up to the upper edge, starting with the seam that was just created in step 4. Fold the entire BRIM so that the right side is facing both toward you and the interior, creating its own lining. Iron the lower edge and the open slit which is the back.
6. Place the ties at the lower edge through the opening in the back. She places the unfinished edge of the tie at approximately 10 cm. (4”). Do the same on the opposite side with the other tie. Sew the ends of the tie in place. She later explains that the placement is individualized so for a smaller head the end of the tie can be placed at just more than 10 cm or more (4” or more).
7. Create a casing for the tie that does not sew the tie down at any point so that it remains free to be pulled and adjust.
8. She continues the sewing line of the casing around the brim.
9. Topstitch at the opening in the back to the top edge.
10. Long stitch along the upper edge so that it does not separate as you attach the crown.
Crown
1. Find the front center of the crown and pin right sides together, all around the top. If the crown is slightly larger you might need to do a small pleat or ease the material. Finished!
Muchísimas gracias. Esto es un regalo grande. Lo subo ahora mismo.
Hola Ana.. Soy Idalys desde Panamá.. Gracias x excelente idea.. Ya hize el primero.. Me quedo muy bonito.
Agradeço as explicações. Fiz e ficou perfeito.
Que sinpatica eres y que bonitos tus vidios voy hacerme el gorro,gracias guapa😘
Muchas gracias, me ha encantado.
Amen
No me canso de ver su tutorial xq es muy fácil podría hacer tapa bocas para niños
Ya tengo el video de la mascarilla para niños
Thank you so much , l will make these for the hospital.lt would be appropriated if there’s substantial in English
Felicidades, un vídeo útil, excelente tutorial!!
Ana te saludo desde Colombia hice mi gorro me quedo perfecto mil gracias bendiciones
Pieza lateral de 70 x 25 cm y para el cordón 2 piezas de 37 x 4 cm.
Good
Muy bonito y bastante fácil
@@mirnaluciasaavedra5527 muy lindo
Ni
Gracias por colocar medidas
Me encanta como lo has hecho.... Yo los he hecho y además le he forrao la cabeza también ... Dsd q busqué como hacerlo y encontré el tuyo fue el mejor... Habré hecho ya mas de 100 gorritos... Con ese frunce me distes idea para cerrarlo completamente y ponerle uns goma ancha... Y son comodos para ponertelos.. Así q muchisimas gracias x tu buena explicación... super bien y quedan monisimos... Muchas gracias😘
Me encanta que te haya servido. Muchas gracias a ti
Please can someone help translate this to english?🙏 I’m a nurse on a covid floor and want to make this for my coworkers, but I don’t understand all of the instructions :(
Side piece of 70 x 25 cm and for the cord 2 pieces of 37 x 4 cm.
Very useful for many jobs, toilets, clerks, cooks, butchers, fishmongers, cleaners. Also for people who are undergoing cancer treatments. To protect us from contamination and bacteria and viruses. And for the pleasure of wearing it.
You have the Pattern by clicking here: https: //drive.google.com/open? Id = 1J49 ...
Fabrics in my online store analealpatchwork.com
Subscribe and press the bell and so we keep in touch
Muchísimas gracias Maria. Un abrazo fuerte.
Maria Garmendia thank you!
Lo mejor de lo mejor en la pandia he hecho al rededor de 800 gorros y todos genial a todo el mundo le keda genial muchas gracias por darme tu idea y haber hecho felices a muchas gente con estos gorros en Mentos tan duros k no había de nada mil gracias desde Cáceres
Gracias bella dama , como dicen el arbol se conoce por sus frutos. Su explicacion es muy clara los cortes quedan perfectos le digo que ni un solo alfiler use y de una me confeccione 4 y mi esposo dijo quiero uno , mi hija y yo nos miramos sorprendidas.
Muchas gracias desde Colombia logre hacer el gorro y me quedo super gracias a tu buena esplicacion
Hola feluciraciones me encantó voy a ir esta semana y voy a comprar la tela y lo voy hacer Dios te bendiga explicas muy bien saludito desde Colombia
Ana ya estoy en tu canal me encanto tu gorro quirúrgico voy a hacer uno pues mi hija trabaja como enfermera en terapia intermedia y nesecita varios gorros y ese que hiciste me encanto y fácil de hacer no soy muy buena en la costura pero lo intentare te escribo desde EU de la Florida ciudad de Pompano y explicas maravillosamente bien un cariño que estemos bien y a cuidarnos mucho😘
Mil gracias por compartir tus conocimientos, gracias a este video he podido hacer gorros para vender, no se mucho de costura pero son muy facil de hacer con ese paso a paso qué nos das, Bendiciones. ❤
Excelente mejor explicado imposible, muy fácil hasta lo podemos hacer a mano y las medidas perfectas a cualquier persona la queda porque es ajustable, muchas gracias y bendiciones desde Venezuela
Hoy e terminado el gorro super bien no sé cómo mandar la foto sino te la mandaría muchas gracias como aprendemos viéndote
Si estás en el grupo de Facebook Retos de Patchwork, allí me envían las fotos
Gracias , fíjate que hice uno y me quedo súper perfecto . Muchas gracias
Felicitaciones por tus trabajo ,don todos muy buenos ,y aprendo mucho
Q linda q dejaste las medidas escritas muchas gracias fabuloso muchas pero muchas bendiciones explicas súper bien u hermoso el gorro
Muchas gracias muy amable por la explicación del patrón lindo día ❤️😘
Hola soy de Argentina....muchas gracias ..!!!!! Muy bien explicado
gracias se lo agradesco mucho pues tenia que hacerle uno a mi hija que trabaja en una drogueria y por la situacion que estamos pasando se lo exigen bendiciones y me suscrtbo a su canal
Hola, soy Loli, gracias por el tutorial. Me ha venido fenomenal porque he hecho varios para mi hija y sus compañeras del hospital para que no se toquen el pelo cuando se cambian el epi
Muchas ganancias señora linda preciosa ,con mucha calidez ,mej encantó el modelo y no tan difícil ,muy bien explicado. Dios bendiga .
felicitarte por tu bloc , me encanta ver tus vídeos y decirte que he hecho el gorro de sanitario y me ha quedado perfecto , siempre gracias a tus explicaciones .un saludo
gracias me gusto mucho la explicacion y muy facil de hacer, saludos desde Honduras
Una maravilla como explicas!!! Hice un bolso hace dos años sin saber nada de costura con un video tuyo...ahora voy a confeccionar esta gorra!!! Gracias infinitas desde Montevideo Uruguay
Sencillo y muy bonito.muchas gracias.saludos desde Colombia.
Es el mejor gorro que vi en youtube muy sencillo y muy bien explicado.
Muchas gracias
Muy buenos los tutoriales del gorro muy lindos espero me informes de otros muchas gracias buen día
Hola Ana.
Quedo Hermoso muchas gracias me sirve mucho para hacerle a mi hija
Hola Ana ! Gracias por el diseño, me gusta mucho, soy enfermera, amor de los Estados Unidos🇺🇸❤️🙏❤️🙏
Muchas gracias
Muchas gracias sra Ana me parece muy fácil lo boy a practicar me parece muy práctico cdo lo elabore se lo muestro desde Colombia Sta Marta Magdalena felicitaciones
Mujer tienes unas manos maravillosas para explicar bien claro. Gracias
Ana precioso fácil y bonito muchísimas gracias.