Love your videos….. just picked up three Cummings 12 valves at a fantastic deal. One is a little bit newer with a five speed….. that’s the one I’m going to into my 1966C 20 three-quarter ton…. do you think I need to put a newer suburban front end in or just use the same front end? One quick question the five speed transmission came off a transfer case. What do I need to make it a regular 2 Wheel Dr.? any help would be muchly appreciated many blessings. Jer🐕
Doing a 24v swap with a nv5600 into a 2wd square body bought the same engine mounts from summit/eBay but oil pan is hitting drag link needs to be raised up about 1/2" to 1" was wondering if you have ever had a problem with those mounts or not? Engine and tranny came out of a 2000 3500 cab chassis.
Ready to start a swap on a 03 chevy 2500, will most of this information apply? Tips on how to get cruise control for 47RE from 4l80 harness? Or would it be easier just to do a manual? Neutral safety switch?
How does a 73-87 K20 do with the extra weight of the Cummins on stock or lift springs? Great channel, I was going to just do an LS swap but that's for wussies!
Will the glow plug solenoid on a 6.2 diesel square body work for the grid heater? I have a 82 that still has the glow plug relay in which has the key on power and shut off solenoid power.
I got oil pressure and temp gauges working but no tac/speed? Any suggestions on what to look for? 98 k3500 originally a big block truck with a 12v out of a 93 d250
Doing a Cummins swap out of a 91 donor into a 85 dodge crew cab, do you recommend the alternator even on that swap? Also do you recommend/advise using the 85 wiring harness or using the wiring harness out of the 91 donor?
Need trans will pay 💰 built NV 4500 4wd 12 valve 86 4wd Cummings swaped expo 86 sticker two tone blue & grey with 4 in roll bar 4 in lift with 35 Toyo open country on Classic aluminum hole rims poppie pins holding up roof liner classic.
I’ll be doing a new video soon. I’m doing a giveaway on the channel if I hit 50,000 subs by the time I’m done building the latest truck. Stay tuned and tell your buddies to subscribe
Hey so for the fuse block constant power, would that be the wires on the fender solenoid on a obs ford that was originally a 7.3 just kinda stumped at what or if I need to do something with those remaining wires
Great summary. Will be using this for my swap!
And great to see someone here in Alberta having fun with these trucks too.
Outstanding! Best video on youtube!!! Straight to the point and simple
Good information, getting ready to start a build.
Great video , just getting into the Cummins swap game and this helps a lot will be following channel
Sounds good!!
Great Video and TIPs !!👍🏼🏁
Great video brother.
Love your videos….. just picked up three Cummings 12 valves at a fantastic deal. One is a little bit newer with a five speed….. that’s the one I’m going to into my 1966C 20 three-quarter ton…. do you think I need to put a newer suburban front end in or just use the same front end? One quick question the five speed transmission came off a transfer case. What do I need to make it a regular 2 Wheel Dr.? any help would be muchly appreciated many blessings. Jer🐕
Good stuff thanks , can you tell me how to wire up my 4l80e to my Cummins 12 ?
When I’m pulling my 12v do I need to keep any of the wiring
Wow awesome info man thanks!
You bet
Doing a 24v swap with a nv5600 into a 2wd square body bought the same engine mounts from summit/eBay but oil pan is hitting drag link needs to be raised up about 1/2" to 1" was wondering if you have ever had a problem with those mounts or not? Engine and tranny came out of a 2000 3500 cab chassis.
No sir didn’t have that problem
For the sake of time and simplicity, is a pre-made harness made for sale for this squarebody/ cummins swap?
No sir. But like I said your factory harness will work
SUBSCRIBED,
Ready to start a swap on a 03 chevy 2500, will most of this information apply? Tips on how to get cruise control for 47RE from 4l80 harness? Or would it be easier just to do a manual? Neutral safety switch?
Go manual!
How does a 73-87 K20 do with the extra weight of the Cummins on stock or lift springs? Great channel, I was going to just do an LS swap but that's for wussies!
Does just fine. I did a 1/2 ton and it was perfect
Will the glow plug solenoid on a 6.2 diesel square body work for the grid heater? I have a 82 that still has the glow plug relay in which has the key on power and shut off solenoid power.
It should yep
I got oil pressure and temp gauges working but no tac/speed? Any suggestions on what to look for? 98 k3500 originally a big block truck with a 12v out of a 93 d250
What trans?
@@samstrucks stock 5 speed not sure what model I’m a Chevy guy. Lol
Did u say u wouldn’t recommend gauges? Whaaaat?
Doing a Cummins swap out of a 91 donor into a 85 dodge crew cab, do you recommend the alternator even on that swap? Also do you recommend/advise using the 85 wiring harness or using the wiring harness out of the 91 donor?
Check out my video on how to wire a Cummins swap, will answer all your questions
🤔
single battery sufficient for cummins swap Down in Florida
Sweet
Do you have the info for the AC wiring?
It’s pretty simple, just grab the handle beside your hand and turn
@@samstrucks not where I live, tach best to run off balancer or alternator ? I have a first gen.
Can I ask the approximate price for a 12v P pump swap? I’ve got a 93 F350 4WD with a 460
You’re going to be looking at approximately $5000 plus the cost of the engine and transmission.
Will this work on a Honda Odyssey?
Easy
Do you know if anyone makes a wiring harness for squarebodys and 24v cummins? Or do you recommend running off the stock harness.
No I don’t think so. It’s pretty easy though to adapt the factory harness.
how would i cummins swap my 2017 sierra?
Same way slap it in
what about the 6.7 with the cp3 pump ?
What is the name of the alternator company?
PA performance
What Amp relay for key on power?
You betcha aaa😂
Where did you get that hat??!!
Squarebody syndicate
Need trans will pay 💰 built NV 4500 4wd 12 valve 86 4wd Cummings swaped expo 86 sticker two tone blue & grey with 4 in roll bar 4 in lift with 35 Toyo open country on Classic aluminum hole rims poppie pins holding up roof liner classic.
This video I will watch a few times 🪖
I’ll be doing a new video soon. I’m doing a giveaway on the channel if I hit 50,000 subs by the time I’m done building the latest truck. Stay tuned and tell your buddies to subscribe
Don't tell me how to live my life 🤣 .
G56 trans bolts up to a np205
Definitely helped your a little fast but I can come back to rewatch/pause.
Will this wiring work on a 2007 F450 flatbed with a 6.0 motor?
Hey so for the fuse block constant power, would that be the wires on the fender solenoid on a obs ford that was originally a 7.3 just kinda stumped at what or if I need to do something with those remaining wires
I’m not familiar with those sorry man. Just find a wire that is key on power and run a relay from your battery