I’m with your wife sand it weather it . Just go with it. You’re good at that. That’s why I watch. I got about a100 well maybe more new kits . But have more fun stripping and building old builds I buy on line and at shows. I love Rusty’s , rat rods , and wrecks. They’re just fun.
I like your Chanel because I like what you do, ignore the haters because you're work is cool, not too many people can do what you do . Happy Holidays buddy.
I scratch built a 1970 Chevelle in 1/12th scale that has the engine pulled apart showing the lifter valley and head gaskets and much more on my UA-cam channel right now I'm working on my scratch built 69 pro street Nova
I say keep going with it. It'll be unique and I don't think the roof is too worn. Do the same in other places. It just looks super dirt worn and ground/grown in. lol
Strip/sand all new coatings. Then use 2k primer (like auto bodyshop) only use isopropyl (rubbing alcohol) to thinn primer out. This will create an isolation coat and prevent the old paint from reacting with the new coatings. Spray can paint dryea when the resucer evaporates from the paint. When you apply new paint, the new reducer melts the old paint, hence the cracking/crumbling reactions. This is known issue in the autobody industry. Good luck👍
Engines are my favorite part of a build I usually get to painting the body and it goes back in the box I have a couple of those 1/24 Chevelles that are old junk builds ups
I always put my screwed up car bodies in brake fluid to remove paint. It even works on some lacquer paints. Best of luck. Either way, it's going to be cool. I would just sand it all to look like the roof.
I recently stripped one that had Testors Wet Look over Tamiya metallic. The only thing that would touch it was 90%IPA and HEAVY scrubbing. Wore out an old toothbrush and used about a pint of IPA.
Sand the body down in water after that do a candy color i like the color you have on the car spray it again. but before it dries take some saran wrap apply it to the paint job then pull off quickly hopefully you can get a new custom candy paint job on your ride good luck looking forward to seeing your results soon 😀👍🥁
Whenever I have this issue on re-builders, and its often due to not knowing what type of industrial dye they used originally, I get $ store oven cleaner. It will come off. Then start over. It would frustrate a normal man. However, after I get pussed off and put it back in the stash a couple times, it doesn't seem to bother me. God bless
Hilarious! Jay Z did it too. lmao. EZ Off Oven Cleaner strips paint for me. *** You gotta strip it ..again. Paint again. - If that fails...weather it out. Hey its good to see others have paint problems too.
Spray it red then immediately stick it completely in alcohol for 24 hrs then scrub with brush. If that doesn't work buy another kit or turn it into a ratrod.
Alcohol 🍸 no no no 90% Rubbing Alcohol is my go to if degreasers don't work Ive used a bunch of them The ones fast food place uses Awesome Purple power And others
Dig your stuff Man. I say buy the ticket take the ride. I like how it looks where you sanded it down. I bet it weathers up really cool. Break out the sponges. As far as your phone goes, you try kicking it?
![Batman! Vampire! Miniature! Painting! [Ep. 106]](http://i.ytimg.com/vi/TwJ0MvNMMSc/mqdefault.jpg)
Keep sanding it and then clear it. Looks great.
Sand it till orange peel is pretty level and add rust where you think it needs it.. Build the car and SMILE 😁👍🏻🇺🇲
I only watch your channel I like your weathering I’m building a 51 Chevy belair and a junk 58 Edsel pile of rust
I use purple power sparky
Recommend you try supper clean or purple power for stripping they’re a little stronger than La awesome. Per gallon about the same price. Worth a try.
Yea I'm definitely going to switch to something else for sure
I’m with your wife sand it weather it . Just go with it. You’re good at that. That’s why I watch. I got about a100 well maybe more new kits . But have more fun stripping and building old builds I buy on line and at shows. I love Rusty’s , rat rods , and wrecks. They’re just fun.
I like your Chanel because I like what you do, ignore the haters because you're work is cool, not too many people can do what you do . Happy Holidays buddy.
@@donaldcarpenter2954 thanks
Well, this is what l would do to it...
Got it, Cool.
Time to start sanding bro, make it look patina like the roof 👊🏻⚡
I scratch built a 1970 Chevelle in 1/12th scale that has the engine pulled apart showing the lifter valley and head gaskets and much more on my UA-cam channel right now I'm working on my scratch built 69 pro street Nova
I say keep going with it. It'll be unique and I don't think the roof is too worn. Do the same in other places. It just looks super dirt worn and ground/grown in. lol
I would strip it down in purple power and just start over again. I know you will do a great job restoring this one Brian.
im going to start using that for sure for now on..
I would leave it. It looks like an old backyard paint job that's been fading away over the years. Just gotta add the rust and grime.
Strip/sand all new coatings. Then use 2k primer (like auto bodyshop) only use isopropyl (rubbing alcohol) to thinn primer out. This will create an isolation coat and prevent the old paint from reacting with the new coatings. Spray can paint dryea when the resucer evaporates from the paint. When you apply new paint, the new reducer melts the old paint, hence the cracking/crumbling reactions. This is known issue in the autobody industry. Good luck👍
Thanks! That's great info.
Engines are my favorite part of a build I usually get to painting the body and it goes back in the box
I have a couple of those 1/24 Chevelles that are old junk builds ups
Total opposite for me.
Look like a candy paint that should go over silver or gold
I always put my screwed up car bodies in brake fluid to remove paint. It even works on some lacquer paints. Best of luck. Either way, it's going to be cool. I would just sand it all to look like the roof.
Strip it and give it another go ! 👍
Strip it in super clean
Looks like he used testors blue label glue to put it together.
Just got with it and put your twist on it I'm liking it man. I just want to see it done
Try brake fluid it works for me..
I recently stripped one that had Testors Wet Look over Tamiya metallic. The only thing that would touch it was 90%IPA and HEAVY scrubbing. Wore out an old toothbrush and used about a pint of IPA.
Sand the body down in water after that do a candy color i like the color you have on the car spray it again. but before it dries take some saran wrap apply it to the paint job then pull off quickly hopefully you can get a new custom candy paint job on your ride good luck looking forward to seeing your results soon 😀👍🥁
I thought about that. Might be a option on another build too
Whenever I have this issue on re-builders, and its often due to not knowing what type of industrial dye they used originally, I get $ store oven cleaner. It will come off. Then start over. It would frustrate a normal man. However, after I get pussed off and put it back in the stash a couple times, it doesn't seem to bother me. God bless
Hilarious! Jay Z did it too. lmao. EZ Off Oven Cleaner strips paint for me. *** You gotta strip it ..again. Paint again. - If that fails...weather it out. Hey its good to see others have paint problems too.
lol. your the first one to notice that. my last video had a message in it also lol
Keep going with the and add rust
what I do is use Wal-Mart simple green.for when I wanna strip the paint.an I use a tooth brush .and to repaint .i use a gray primer.for my first coat.
i think im going to try that purple power next time..
Spray it red then immediately stick it completely in alcohol for 24 hrs then scrub with brush. If that doesn't work buy another kit or turn it into a ratrod.
😱😱😱😱🤣🤣🤣🤣🤣
Is this what you do mostly , taking other builders discarded models, and rebuild them ? I'm new to your channel
No. I do a little of both. I'm just not a interior guy or motor guy if I try to do something nice. I'm mostly into the crap look 🤪
Could turn it into a graffiti car.
I don't even know where to start with something like that
@Sparkysmodelsalvage me either but it's an idea. Lol. Maybe fine tip markers
Alcohol 🍸 no no no
90% Rubbing Alcohol is my go to
if degreasers don't work
Ive used a bunch of them
The ones fast food place uses
Awesome
Purple power
And others
Yea. That would be alcohol abuse for sure. 🤪
You spelled chevy wrong live vid also...
Dig your stuff Man. I say buy the ticket take the ride. I like how it looks where you sanded it down. I bet it weathers up really cool. Break out the sponges.
As far as your phone goes, you try kicking it?
I hate my phone. lol