Hi, i did not put the dust cover back, because of 2 reason, the dust cover doesnt fit with the led light and second, the led light have mini fan and the cover would just blocked it. The led light still working and still bright, it is worth it and hologen heats up your headlight assembly and eventually in the future will blur your headlight assembly.
Can you upload a video of where it is and how you can change the led light bar on the main silvin or the position light on the tucson thanks...!!! Greetings from Guatemala
Great tips. I have a tucson 2016 and from the Philippines. Will try to do that as well. But have u tried replacing the brake and turn lights to led without causing errors? My front and rear turn sockets are 1156 bau15s and my brake sockets are 1157. Ty for the input.
I'm assuming you're allowed to fit them in the USA as they introduced new legislation here in the UK last January which meant retro fit LED or HID is illegal. It stinks because my 2019 Tucson Premium has H7 Halogen which are almost dangerous on dark country roads
Auxito makes a h7 led bulb that is the same exact size as the stock halogen. No adapters,no cooling fans, no anything just direct plug and play like stock halogen and the reviews seem good. Check them out.
The glue was a great idea! I also put Car Rover’s headlight seal dust covers on mine since the ballasts don’t fit in the housing
Tengo esta misma Santa Fe. Que tiempo de bombillas les lleva ? Cuantos W potencia es permitido ?
I can’t find the plastic rings you used in this video. Can you maybe give me the link?
Hi! Could you help me to find the correct H7 adapter for my elantra 2018 ! I dont know what should i buy on amazon
How you fit original dust covers? This bulbs much longer than original?
Hi, i did not put the dust cover back, because of 2 reason, the dust cover doesnt fit with the led light and second, the led light have mini fan and the cover would just blocked it.
The led light still working and still bright, it is worth it and hologen heats up your headlight assembly and eventually in the future will blur your headlight assembly.
Did get the low power warning ⚠️ light and how did you handle it.
Did not get any low power warning, works like a normal headlight.
Can you upload a video of where it is and how you can change the led light bar on the main silvin or the position light on the tucson thanks...!!! Greetings from Guatemala
NO LINK FOR THE PARTS?
FOR THE ADAPTER OR LIGHTS?
a.co/d/64zdD8v
I don't really can imagine how did you manage to put adapters on the headlight? Tell me pls your secret?
Great tips. I have a tucson 2016 and from the Philippines. Will try to do that as well. But have u tried replacing the brake and turn lights to led without causing errors? My front and rear turn sockets are 1156 bau15s and my brake sockets are 1157. Ty for the input.
I have not tried to put led on my tail light but try searching for "Led Bulbs Error Free Canbus" with your bulb size. It might help.
@@sincerelyenyel yep did that but tucson is particularly picky
wouldn't the glue melt with the HEAT
2 years later still holding, remember led doesnt heat up like hologen does.
THANK yOU , for taking the time to make video
you didn't show the main part - how you then put back the cover since LEDs have an additional block that you cannot most likely fit into compartment.
Hi does glue is melt ? After using?
Hi, it hasnt melt yet and still holding hard.
Yes it melts afterr 1 hr driving 😂 based on my experience, i just remove it and use a regular led without the needs of adapter 😆
Remove the cover of the fusebox for extra access space
Hi, does the glue melt in long run? I mean if the headlight stays on for 1hr, does the glue melts?
Not at all, i had drive for hrs and still holding.
I did the glue thing as well an when the light was out the piece was stuck on had an hard time getting it to turn out. Had to used pullers to get it.
But wouldn't the glue melt with the eat and cause MORE problems? I do not think this is a good idea.
Yes, mine melts after 1 hr driving. 😂 So i removed it, i just used regular led that doesnt required adapters 😆
Thanks!
I'm assuming you're allowed to fit them in the USA as they introduced new legislation here in the UK last January which meant retro fit LED or HID is illegal. It stinks because my 2019 Tucson Premium has H7 Halogen which are almost dangerous on dark country roads
Those halogen light are not bright enough plus the heat that the bulb produce will eventually damage your headlight assembly over time.
thanks for the tips man
Next time get u a headlight too put on your head it's a life-saver 😊
I can’t find them on Amazon can you put the link??
Sorry for the late reply
a.co/d/4FAS2SV for the H11
a.co/d/1pAyk7p for the H7
Auxito makes a h7 led bulb that is the same exact size as the stock halogen. No adapters,no cooling fans, no anything just direct plug and play like stock halogen and the reviews seem good. Check them out.
Thanks, when this one stops working, i will check that one out 👌🏻
that brand led is not good i had 2 kit both broken over time
Thanks for the info, i usually buy Opt7 but for some reason they cant be found, not even in their website.
@@sincerelyenyel Hi, I like your videos.! can you please what is the Amazon link to get the adapter.?
I’ll be waiting the link.
Thanks
Scammers