Pro-tip: Be very careful with how you tighten the screws locking in the clamps. The stress on those clips is very significant and can often be overstressed. My team, 19575 Close Call, had an issue with overstressing the clamp and needed to rerig our entire arm!
Hey there. We are having a problem with our clips breaking. Is it possible to not make them so cheaply? As soon as we took our clip from the package it broke
This is much better than string. but this too has issues. as the spacing between pulleys is not great and edges are not deep enough, belt slides and border of the belt start wearing out and gets jammed.. may be good for 3-4 games and need to be replaced.. there is better way to do this!!!
Hello, Most commonly we see this issue manifest because of too low belt tension. Please send us an email with more details (ideally a video and photos) to tech@gobilda.com and we'll work with you on that!
Hey! Really sorry to hear you didn't have a good experience with the kit, we would expect this kit to take about an hour to assemble. We are always open to feedback on how to make our products better. The best channel for that is to email us at tech@gobilda.com
Ethan what the skibidi bro, we dont even get the right clamps for this build dude
REAL
@@bigouchieyo fr did yall find anything
skibbidi damn tax guatt
same... what the actual sigma...
you have to buy it yourself. We only got 2 allen renches included.
Ethan can you please do a video for a 2 stage linear slide? It has a different build compared to the 4-stage.
Perfect! This answered our questions! Our slides are amazing! Thanks Ethan!
Pro-tip: Be very careful with how you tighten the screws locking in the clamps. The stress on those clips is very significant and can often be overstressed. My team, 19575 Close Call, had an issue with overstressing the clamp and needed to rerig our entire arm!
My team 13051 servo stressors broke several of these clamps due to over tightening.
Is there a video showing this Viper-slide in operation?
This was very helpful 🎉❤❤
☝️true
How would I assemble this using the steel clamps instead of the plastic ones?
Hey there. We are having a problem with our clips breaking. Is it possible to not make them so cheaply? As soon as we took our clip from the package it broke
It shouldn’t be too hard to convert this into a COTS differential linear slide, correct?
Have fun with that, update me if you end up doing it.
Why there's no working of this sliders with motor?
how many kilos can it lift?
Ethan why do u do this to me
What would I have to purchase to change the cable slider into a belt slider?
Just this: www.gobilda.com/belt-drive-upgrade-pack-for-cable-driven-4-stage-viper-slide-kit/!
Mini technocrane
This is much better than string. but this too has issues. as the spacing between pulleys is not great and edges are not deep enough, belt slides and border of the belt start wearing out and gets jammed.. may be good for 3-4 games and need to be replaced.. there is better way to do this!!!
Hello,
Most commonly we see this issue manifest because of too low belt tension. Please send us an email with more details (ideally a video and photos) to tech@gobilda.com and we'll work with you on that!
The string was garbage for sure
this is the worst instructions ever, super hard to follow, took 10 hours to build with pdf on website, do not recommend
Hey! Really sorry to hear you didn't have a good experience with the kit, we would expect this kit to take about an hour to assemble. We are always open to feedback on how to make our products better. The best channel for that is to email us at tech@gobilda.com
The video shows how to do it though.
User error because these kits are incredibly simple to assemble with the pdfs...
@@GearWizards16917yeah
try building your own linear slide with misumis or drawer slides and then talk