My seat has been twisting for over 5 years . A kids toy got jammed under the motor bracket and snapped that cable. You are a life saver buddy, I appreciate it! This issue has been driving me crazy for soooo long.
I know it's been a couple of years since you made this video, but man, thank you, thank you, thank you! My 2014 Chrysler 300 has EXACTLY the two issues you show. The cable on my seat came out of the gear side, and the rivet for the support bar on the seat right side broke off as well. This video could not have been any more on point! Thank you so much!!!
This worked! Quick tip for anyone doing this their are two cables on each side in total. One of them may be faulty. I almost gave up and bough a new motor but simple pulled the old cable off and install the new one with patience. With a little trial and error it will work. Good luck!
Man! Thank you. My 2016 Challenger has the exact issue you explained, moving only on one side (the left in our case). So glad I don't have to buy a whole ass new seat. Thank you, thank you!!
Hopefully you can help me out , I have a 2015 dodge charger and my driver seat something don’t want to move and I have to push the buttons forward and backwards then it works then it randomly moves while I’m driving
Just in case any one sees this all I did waS remove the metal spring and slide it back In It’s holes and it worked perfectly no need to buy new part or stress it
@@thehowardsgarage2480 I truly understand you yea your right if there spring breaks or bend time for a new one mine was still pretty good I removed the plastic and just slid in the metal back to its holes
so close. I got an 06'. Motor towards rear of seat and off set to the inside track. Motor sits about 1.5" from inside rail and 7 or so from outer rail. The inside motor turns and spins. looks like a stripped screw with shavings everwhere.. thoughts?
Great vid! Does anyone know if its possible to manually move the seat forward and backwards in case i dont want to replace a damaged motor? With a wrench maybe?
that exact part frayed and exploded out into tiny strands in my 2008 300c. I was going to buy a whole new seat cus just the motor assembly (if you can find it) was more than an entire ebay 300/charger/durango seat, but hey an $18 unfindable """"rod"""" with a bit of work is the way better option
I have a ‘14 charger and the back of the driver seat (the “recline” function) is broke and lays all the way back. Any idea what I’ll need to replace? I’m assuming it’s a stripped gear or something. I was hoping to have the parts ordered in ahead of time before I tore it all apart. For now there’s a wood crate in the back seat propping me up 😂
I don’t know what it is exactly but I think the place where that cable is supposed to go stripped out or something, because when I place my cable in, I hear it spinning but nothing moves. Only one side moves… what is that piece called? I have a Tesla Model S
Yeah, mine said the same thing. If the part looks the same as the one for your 2005 magnum, then it should work anyway. I haven’t worked on an older Mopar in a while so I can’t remember exactly what yours looks like in the magnum.
Your absolute right only thing I can think of you didn’t mention that if the cable isn’t the same length as the original one or the one you have because it take two to make it work
My seat has been twisting for over 5 years . A kids toy got jammed under the motor bracket and snapped that cable. You are a life saver buddy, I appreciate it! This issue has been driving me crazy for soooo long.
I know it's been a couple of years since you made this video, but man, thank you, thank you, thank you! My 2014 Chrysler 300 has EXACTLY the two issues you show. The cable on my seat came out of the gear side, and the rivet for the support bar on the seat right side broke off as well. This video could not have been any more on point! Thank you so much!!!
This worked! Quick tip for anyone doing this their are two cables on each side in total. One of them may be faulty. I almost gave up and bough a new motor but simple pulled the old cable off and install the new one with patience. With a little trial and error it will work. Good luck!
Where did you order cable from
Man! Thank you. My 2016 Challenger has the exact issue you explained, moving only on one side (the left in our case). So glad I don't have to buy a whole ass new seat. Thank you, thank you!!
I’m so glad this helped you! Thanks for watching!
Bro thank you, my exact issue, bless you
Thanks where website did you order the part on. I’m experiencing the same problem.
www.moparpartsgiant.com/parts/mopar-seat-connecting~68270890aa.html
Thank you!! This was my exact problem and the Dodge dealership I went to told me “the track was bent and I needed to replace it” for $1200. 🙄
Same here, I just walked off.
You’re a life saver bro
Thank you!! I just pulled mine out and put it back in and it work perfect
I’m so glad I could help! Thanks for watching!
@@regisrummans1365 yes
Was it easy to replace?
@@thehowardsgarage2480 can I use my old one that came out
Hi where did u get the part from let me know please thanks
Hopefully you can help me out , I have a 2015 dodge charger and my driver seat something don’t want to move and I have to push the buttons forward and backwards then it works then it randomly moves while I’m driving
on point the whole video. thanks man
Thanks a lot, your video is very helpful.
Just in case any one sees this all I did waS remove the metal spring and slide it back In It’s holes and it worked perfectly no need to buy new part or stress it
If yours is still good and not stripped, broken, or lost then yes it can be reused but that’s not normally the case for most people unfortunately
@@thehowardsgarage2480 I truly understand you yea your right if there spring breaks or bend time for a new one mine was still pretty good I removed the plastic and just slid in the metal back to its holes
so close. I got an 06'. Motor towards rear of seat and off set to the inside track. Motor sits about 1.5" from inside rail and 7 or so from outer rail. The inside motor turns and spins. looks like a stripped screw with shavings everwhere.. thoughts?
Thank you! I’m going to order it for my 2007 Chrysler 300.
Did it work for your vehicle? I have an 08 Chrysler 300c...trying to find out if it'll work for mine.
How did you install it?
@@regisrummans1365 I haven’t purchase it yet only because I did not find the part under my seat
@@racertwentynine2881 I haven’t purchase it yet only because I did not find the part under my seat
@@regisrummans1365 Same here did you fix yours?
Nice job man
This is exactly my problem. Just ordered a new one. Hopefully this fixes the issue
Great vid! Does anyone know if its possible to manually move the seat forward and backwards in case i dont want to replace a damaged motor? With a wrench maybe?
that exact part frayed and exploded out into tiny strands in my 2008 300c. I was going to buy a whole new seat cus just the motor assembly (if you can find it) was more than an entire ebay 300/charger/durango seat, but hey an $18 unfindable """"rod"""" with a bit of work is the way better option
I have a ‘14 charger and the back of the driver seat (the “recline” function) is broke and lays all the way back. Any idea what I’ll need to replace? I’m assuming it’s a stripped gear or something. I was hoping to have the parts ordered in ahead of time before I tore it all apart. For now there’s a wood crate in the back seat propping me up 😂
I don’t know what it is exactly but I think the place where that cable is supposed to go stripped out or something, because when I place my cable in, I hear it spinning but nothing moves. Only one side moves… what is that piece called? I have a Tesla Model S
Where can I get the braided cable from?
@@carlscleaningservicesllc6368 it says in the video. I’d have to go back through and watch it again. It’s been a while since I made it.
Thanks bro fixing my 09 300 tomorrow
How do you instal it?
@@racertwentynine2881 depends on what version you have man if you don’t have a hemi it won’t be the same
@@shonnpowers894 its the hemi
@@shonnpowers894 how'd you install it on yours?
Do you know if this is the same part number for the up and down function ?
So what part do I tell them at the parts store that I need
Got a 2016 challenger with the power seat stuck all the way in the forward position… any tips on how to fix this?
When you try to move the seat back with the button, do you hear the motor running? Or a click, or any sound at all?
@@thehowardsgarage2480 yes!!!!
@@thehowardsgarage2480 Mines the same way, what should I do?
@@ibrahimdiallo5301 Mines the same
Does this rod work for a 2012 challenger? Website says the rod does not fit for 2012 challenger.
Should work just fine…
Do you know what that part is called. I tried that part # and i couldn't find it
Website is called OEM Part Source and the part is called Mopar Power seat motor assembly
@@josetorres185 thank u I need it also
Would you happen to have a link for this part I tried searching it didn’t pop up, thanks in advance
The thing works for a dodge charger 2013?
Yes
My 2016 dodge charger RT only goes forward all the way up to the dash. But come back half the distance is supposed to go…. What do I do?!??
Has it done that since you bought the car recently, or is this something new that just started out of nowhere?
What website did you order the part from???
www.moparpartsgiant.com/parts/mopar-seat-connecting~68270890aa.html
I’m sorry it took so long Daniel.
@@thehowardsgarage2480 lol thanks
@@thehowardsgarage2480 Would that part fit on a 2010 challenger?
@@Flexify12 should be exactly the same
What was that part number!?
What company web site. Url
Thanks for the help
Need one for my 2011 durango what is the name of this thing can't find it anywhwre
www.moparpartsgiant.com/parts/mopar-seat-connecting~68270890aa.html
SO sorry for the super late response
Hi
I went to order this part and it said that it doesn’t fit my 05 dodge magnum
Yeah, mine said the same thing. If the part looks the same as the one for your 2005 magnum, then it should work anyway. I haven’t worked on an older Mopar in a while so I can’t remember exactly what yours looks like in the magnum.
What if that doesn’t work one side is still stuck
Thank you
Were did u get it at
www.moparpartsgiant.com/parts/mopar-seat-connecting~68270890aa.html
From Where i can get this thing??
Did you watch the video? I gave part numbers and where I got it in the video.
Your absolute right only thing I can think of you didn’t mention that if the cable isn’t the same length as the original one or the one you have because it take two to make it work
It is the same length… I mentioned that in the video.
He mentions it at 3:23
seat works fine , but does not lock in, loose
Hey how you been
Good, how are you brother?
I need your number again so I can show you the car
@@phillipwashington6808 email me at bbodylsswap@gmail.com
@@phillipwashington6808 I didnt want to put my phone number on UA-cam, but email me and I’ll send you my number through there