firstly, nice presentation sir. If the ground plane is full, what you explained is ok. if it is partial ground or DGS, then how to create the substrate from the ground...can you clarify it sir..tq
Sir, after trying multiple times, I'm still facing the wrapping of the patch over the top surface of the substrate. What actually happened is that the patch is wrapped over the bottom surface of the substrate. please explain the possible reason behind this.
Sir i could not able to wrap the rectangle sheet and solid cylinder, its showing error message as "Body could not be created for part because of invalid parameters to WrapSheet operation". Kindly do the needful
sir, please upload video how to change angles for conformal in HFSS tool
Good description and demo!!!
firstly, nice presentation sir. If the ground plane is full, what you explained is ok. if it is partial ground or DGS, then how to create the substrate from the ground...can you clarify it sir..tq
The DGS region has to be filled with air. With the thickness equal to conducting ground (0.035mm)
hi sir thank you for explaining this. if it is cpw antenna how can we assign excitation and boundaries...??
Same procedure, only thing is the port must tough both radiator and ground
Sir, after trying multiple times, I'm still facing the wrapping of the patch over the top surface of the substrate. What actually happened is that the patch is wrapped over the bottom surface of the substrate. please explain the possible reason behind this.
You can contact me on skrsedutube@gmail.com we can see the possibilities of resolving the issue
how to check the incident angles in FSS sir
You have to set in port declaration.
Sir I am unable to wrap patch to the substrate
You can select objects and then wrap it. Make sure the face of the patch should be selected
Sir i could not able to wrap the rectangle sheet and solid cylinder, its showing error message as "Body could not be created for part because of invalid parameters to WrapSheet operation". Kindly do the needful
You can contact me skrsedutube@gmail.com
Sir, you did not assign material ground and patch as PEC or other. will it work without assigning it.
I have assigned PEC for both radiating element and ground, may be while editing video that portion is skipped.
Wrap function not work
While wrapping selection mode you can keep object
When I am simulating it is showing r is undefined and i have given r as 15mm but in wrap sheet it is showing error kindly do the needful
Please let me know what is the error message you are getting
Same problem sir.. please let me know about the value of $r
@@goutamgogoi7759 It is 15 mm