How to replace a washing machine door lock | Washing Machine Spares & Parts | 0800 0149 636
Вставка
- Опубліковано 24 кві 2014
- Spares Direct, leading appliance spares supplier, have created a video to explain how you can replace your washing machine door lock. In this video, James shows you how to change your washing machine door lock without damaging the machine.
You will find the following washing machine spares and parts on sparesdirect.com:
- Washing Machine Door Lock
- Washing Machine Door Locks
- Washing Machine Spares
- Washing Machine Parts
- Washer Spares
- Washer Parts
You can follow us on facebook at / sparesdirect and on Twitter @SparesDirect
This vid tutorial is brilliant. The door lock had disappeared inside the machine. I thought the only way to get to it would be some major exercise, removing the front of the machine... or something horrible.
Because of Covid19 Lockdown, to get a repair person was just not possible, and anyway would have been an £80 call out, then the work time, probably a part or whatever. So it sat broken for a month... more.
Then I found this vid, and fifteen minutes later everything was fixed. Brilliant. 10/10 and will be sharing this site. many thanks etc %-)
Yeah Baby!!! Shoestring door trick followed by lock and handle replacement. Plenty of credit in the bank with the Mrs, off to play golf tomorrow. Brilliantly clear video. Thank you.
Thx so much man :) i just fixed for first time in life a washing machine. It was harder though you made it look easy :D
Thank you so much!!!
We run an B&B and our washing machine door just jammed. The string method saved our bacon!!!
Thanks James
Very helpful , particularly as it illustrates the scenario where the interlock mechanism is not fixed to the machine body by screws .
thanks my interlock had fell in to the machine so watching you helped me put it back
Got my w/m opened after seeing the instruction. Thanks.
Used this video to change my broken interlock on a Candy washing machine, dead easy. Mine has a plastic wire holding the door seal on but you just pull at it where the join is. I didn't pull all of the door seal off, just enough to get the job done and it made putting it back in place very easy. The plastic band is just a ratchet like a cable tie and make sure it's all pushed in to place then close the ratchet and tighten. I work in an office and always have and I found it easy and saved a nice bit of money too. Thanks
Thanks for this tip just replaced my door lock on a candy and used your tip took less than 10 minutes and cost a lot less than the call out charge the repair people wanted
Brilliant I just had the hoover washing machine door problem I used string and it's work well done. God bless you
cheers mate just fixed my door lock , did ask someone to come out and have a look at it, told me £20 to come out and after watching your video it took me 5 minutes to fix the job, many thanks
great, great, great. It helps a lot. I am very thankful.
Thanks for this video. I have just followed this exactly to change the lock over. Saved me over $100 Aussie dollars at least. 😊
i love your heavy breathing when you concentrate james xx
u gay
IT WORKED!!! With the knife. Thank you so much.
Omg I could kiss you...Thank you so much uve saved me a few penny's. .who would off thought a bit off string could open the door☺
great vid, very informative
dude you're the best
Thank you for this video but this just helped me pit the module I've been waiting for which was delayed. I put it in seconds, my wife will be over the moon now its fixed Thank you 😊
Thank you. I was able to fix dropped door lock.
perfect video bro ! keep this work up
thanks for this vid
my interlock system has slipped out of place and now I know how to fix it
Best ever explainer. Keep up.
Thanks a lot.
Thank you so much 👏👍
top man👍👍
Thanks GR8 help👍🏾
De un real folos. Mulțumesc
make great use for the splendide 2200xcd
Thank you
I brought a new washer door lock assembly and latch because the washer would fill up with water, but the door would not lock causing the washer not to work. After replacing the switch on the door and the latch the door still not wanting to lock, any ideas? I've already tested the switch and it's fine. Help please I have a Frigidaire Affinity front loader washer.
Was helpful
I solved locked door problem by pressing the door inside instead of opening it (towards lock position) after end signals for 15-20 seconds & later door opened easily
easy thanks
Nice tutorial, Can you share a link where to buy the interlock mechanism?
this video will work on some ariston washers and hotpoint ariston washers
thank you so much i could not figure how to get the ????? interlock switch out on my bosch washing machine because it has no screws just 2 plastic indent pins your tutorial showed me how to get the switch out thanks again....jon
I got a question How come my washer got water leak from bottom when i washing my clothes?
Merci de m'avoir montré comment démonter le verrou, en appuyant sur les 2 tétons en plastique.
Thank you for this video. Our combo Splendid 6200 wont open. do you know common failure that causes it? Many thanks!
the interlock needs replacing
the handle needs replacing or replace both
Great explained , very helpfull
Hi I have a Hoover WMH 168 D the door shuts on it fine , but doesn't lock at all. The time even counts down when you start a progam but no water fills the machine, do you think this is a door problem. many thanks for the video
me too!
You know you can just take two screws out and lift the top cover off right? You can then reach the door lock and either push the latch with a screwdriver if the handle is broken and you cant open the door or take the lock off that way. You don't need to remove the rubber drum seal at all.
How do I replace inner lock on my tumbler dryer hot point Aquarius VTD00P
Jill Mcdonald I'm a UK white goods engineer I've worked on hotpots for years you have to take the side panel off on the lock side unless you can access it from the top when the Lid is removed some models vary
How can I check the interlocks in washing machine the model is bosch logixx 9 varioperfect e-nr WAS24422GR/07. The code of the original door lock is 00619468. Contacts are 3,2,1 which bridge cables.because I understand I have problem with the washing machine if anyone knows let's answer thanks
Where does the green part go
What is that green cable. I can't seem to find where it clips into
karl m it's the door lock manual over ride.. the square bit of it goes over a little Lever piece on the door lock assy then runs down the machine to behind the kick plate. (I'm a UK white goods engineer)
1:44 what is name this ? On door?
You didn't show how to fix door handle, cos the replacement comes in parts and wanted to know how to put back together. Have my door in parts , will have to try again tmoz and watch other videos .
Everything is made of Plastic, my Ariston has the door locked , watched a Video how to do the string method. Need a new lock , call out is almost the same cost as a new machine ,
who can tell me how to remove the 🔐 padlock from the hoover 14000 machine?
Why don't you have a link to your website on in the show description?
Better still, how about a link to the interlock section of the website.
Well done Darth Vader
Hate how they dont use screws on interlocks anymore.
thats a door catch not the lock ?
sorry my mistake it is lol
Skipped the important step of how to unlock it when the door mechanism opens the other way!!! ("reach up under the bottom..." then skip ahead without showing us!)
Memo. Do not hide valuables, drugs, or money in your domestic appliances..... if you have a broken switch... Nuff Said..!
Ok ok 🤗
Who is the gobby git in the background ?