Beginners guide to using clear base coat.
Вставка
- Опубліковано 14 жов 2024
- In this episode I'll share with you how to use clear base coat before appling silver metallic. Silver metallic can be tricky to apply but with a few simple tips and techniques you can eliminate alot of frustration. we will also go over sealer , prepping, two tones and more! We this repair I'll be spraying the Iwata Kiwami 4 for the first time . Thanks for your support and be sure to like, share and sub if your into it.
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
perfect clear for you diy repair
• Quick drying clear coa...
beginners guide to paint a car
• Beginners guide to rep...
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
SUPER THANKS BUTTON
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
Business Inquiries: okpaintworx@gmail.com
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
Products and tools in this video
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
3m performance paint gun
amzn.to/3unGMKC
Roberlo ME1 primer
amzn.to/31KTt2A
Premium Tack Cloths, Bond Crystal Brand 18" x 36" 12 Cloths Per Box
amzn.to/3gfCfAK
mirka ultra fine 1500grit scuff pad
amzn.to/3rckibn
Mirka 3000 foam pad hook and loop
amzn.to/32JLenJ
Kleanstrip Prep-All Wax & Grease Remover, Gallon (KLE-GSW362)
amzn.to/30nRBwV
Kleanstrip bull dog adhision Promoter 15OZ AERO (KLE-ETPO123B)
amzn.to/3oo839i
Mirka Deros MID650-912-5 6" Electric Dust-Free Sanding System
amzn.to/3pNf45n
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
Song: Dipcrusher - Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Dipcrusher - Islands (... -----------------------------------------
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.
I changed a rm clear for a kiwami 4, recently I got the perfect configuration.
Very great gun for the price.
It sure is!
I picked up 2 of those Kiwanis a while back. Amazing spray gun for the money.
For sure
Amazing tips and techniques 👨🎓👍
Thank's for the support!
Wow can’t even tell where the damage was great job looking forward to seeing the cut and buff
Ty
hermoso trabajo amigo ,bien explicado los pasos y un resultado impresionante
Thank you brother! Appreciate the support!
Not sure if it’s a mistake but I would have sealed everything first then Black a few inches beyond the silver then mask it off and spray the silver. Nice work!
I'll give you the answer Brian. I painted the lower color black and it was actually dark blue! Lol
@@GarageNoise lol! Did you respray
@@PaintSociety no , send it! Just kidding, yes, made it right. Even told the customer about it .we had a good laugh.
@@GarageNoise it happens !!!
Great video GN! Still can't figure out the mistake you referenced to in the video. I thought maybe it was a coverage issue but the later footage looks good!
See if anyone guesses it then I'll pin the answer in a bit. I had forgotten I talked about that. Lol
Just picked this gun up for $167 brand new can’t wait for it to come in
Let me know how you like it. I think you'll love it.
@@GarageNoise yeah will do seen so many videos and everyone said it’s an amazing gun for the price but hopefully my air compressor can keep up with it unlike my pro lite can’t use it since I got a 29G air compressor with it full of air 150 psi can’t get it to stay at 2 bar
@@AliVapeReviews It uses alot of air but hopefully it works out.
Looking good after the wet sand and polish.
Hi Chris. Would using a clear base coat application be a good addition when refinishing any colored substrate? I guess this smoothens out the finish when you have repaired / primed areas along with non-repaired areas just ready for clear coat.
Would love to see some content respective on blending theory / methodology that can be used to determine and proceed with this process to use as a guide
In warm or hot temps clear base is a great addition. It's not really necessary on solid colors in cool temps.
Do you have different guns for different jobs depending what type of finish you need to achieve ? Or do you just use the gun you feel most comfortable with ?
Thank you for sharing your knowledge with us ❤️
I use the same gun for base coat and clear. Whatever gun I'm in the mood to use. Thank for watching and commenting.
Great job how money hours did it take you to complete this job
Can't really recall, probly about 25
chris see you havent set your gun right ! its gauge first and water trap and then air line its a like from me mate ! chris you got the kiwami4
Lol , I have now this was filmed before that. I don't really know if it matters that much. Thanks for watching brother!
How do you get vertical surfaces to be as slick as a horizontal surface when spraying clear?
Thin wet coats. Getting a slick finish is all about air setting in relation to fluid volume. Of course distance and spraying speed can change the appearance as well. I have several video's on this topic but will be doing a dedicated detailed video on this soon so stay tuned. Appreciate the comment and support!
How long after can I put tape on the paint?
Best practice about 24hrs although I've pushed it before.
I went to your Amazon store and found the 3M performance guns. Which do you use pressure or gravity?
Gravity
How long do you have to wait to apply clearcoat after painting?
15-30 minutes depending on temp
So you have to keep your wet bed wet for just your first pass of base or how do I keep it wet for my 2nd pass/when I’m blending. Won’t it flash before I get to it in time?
If you need to you can apply a 2nd coat of wet bed right before you blend the color. It also depends what your goal is with the wet bed. I use it on metallics to create a good clear basecoat before applying color. So metallics lay flat in fine scratches from prep. If your concerned about your blend, lay down another coat of wet bed just before you do your blend. Hope this helps appreciate the comment and support!
I am trying to fix a dent. I already put filler and primer down. It’s metallic paint. Do I need to keep the wet bed wet the whole time or just put it down and start blending and it’s ok if it dries during blending?
@@stephenpinckard526 yes, it's ok if it dries it will still help the blending. I like to keep two guns one with the clear basecoat and the other with the color. (That's if you have two guns) and I'll put another coat of clear base on my blend area just before I do my blend. You don't have to do that tho. Appreciate the comment and support!
What if you only have one gun like me!
Did u get blue overspray by where the tailight is ?
No I painted the lower color black when it was actually dark blue. Oops
Are you using waterbase paint?
No, solvent base
With the kiwami4, what is your nozzle size.
1.3
What compressor are you using?
I use an Ingersoll rand that produces about 17 cfms . There is a link to the one I use in my storefront. If you want to check out the specs. I bought mine at tractor supply, it cost about 1,200
Here is the link this is three phase . I use two phase
amzn.to/3LfRMyq
You painted the lower bedside black instead of blue.
Yes ,I did
The mistake I think is when you first started you didn't start the gun before you hit metal 🤔
Actually I painted the lower color black and it was dark blue🤣 had to repaint the lower color to make it right.
You didn’t spray far enough to the right to cover it all on the black.
U not coming all the across the panel u stopping halfway through which can cause paint build up where u stopping at
Yes, maybe if your not careful you might get rough paint . It's really not an issue tho think about if I were painting a door. you never stop painting on the egde you always stop somewhere in the panel. Thanks for the comment.
No you supposed to go all the way pass the end of the panel
Forgot to paint the back corner
U didn't turn that corner