Thanks for the well explained switch mods, Ive added some another way to. On any of the two position switches cut top most wire (white) and wire a normal momentary switch in series with cut wire. Now you have three positions, two on the switch and third momentary.
Hi there thanks for the info have put mine in new box same as JR2610 radio so have lots of switches need to get more switches on to the Flysky board upgrade your software on your radio
Is there a way to hook up two 3way switches to control 1 output. So 6 positions between two switches one output. Please x100 let me know what you think
Yes but only 5 positions not 6 (LL,LC,CC,CR,RR only. LR gives the same as CC) and only on the analogue outputs, not the switches. The switch channels can go from 2 position (voltage left, voltage right) to 3 position (voltage left, no voltage, voltage right) but can't be halfway. You'd need to look up 'resistor ladder' and ideally buy a 6 position switch from AliExpress or similar.
@@Makes-and-Mods thanks very much for the reply sir. I honestly just have an abundance of 3 position switches hooked up and in something I'm making so just hoping to use a few of them together as I don't need 12 Individual switches. I could email you a photo if my explanation leaves needing more information. I basically put an i6x into an old Xbox racing wheel and pedals and I have 6, 3 position switches in the wheel along with how ever many switches come on top of thr i6x flysky. I hope this helps. Trying to work with the parts I have currently.
Thanks for the well explained switch mods, Ive added some another way to.
On any of the two position switches cut top most wire (white) and wire a normal momentary switch in series with cut wire. Now you have three positions, two on the switch and third momentary.
Hi there thanks for the info have put mine in new box same as JR2610 radio so have lots of switches need to get more switches on to the Flysky board upgrade your software on your radio
Thanks 👍
Is there a way to hook up two 3way switches to control 1 output. So 6 positions between two switches one output. Please x100 let me know what you think
Yes but only 5 positions not 6 (LL,LC,CC,CR,RR only. LR gives the same as CC) and only on the analogue outputs, not the switches. The switch channels can go from 2 position (voltage left, voltage right) to 3 position (voltage left, no voltage, voltage right) but can't be halfway. You'd need to look up 'resistor ladder' and ideally buy a 6 position switch from AliExpress or similar.
@@Makes-and-Mods thanks very much for the reply sir. I honestly just have an abundance of 3 position switches hooked up and in something I'm making so just hoping to use a few of them together as I don't need 12 Individual switches. I could email you a photo if my explanation leaves needing more information. I basically put an i6x into an old Xbox racing wheel and pedals and I have 6, 3 position switches in the wheel along with how ever many switches come on top of thr i6x flysky. I hope this helps. Trying to work with the parts I have currently.