How to install OEM Splash Mud Guards Flaps on the 2017 Lexus RX 350 | PU060-4801T-P1
Вставка
- Опубліковано 28 вер 2024
- My pops has been wanting a set of mud guards/flaps/shields - whatever you want to call them. So I picked up an OEM set and spent the afternoon together.
Part Number # PU060-4801T-P1
Note:
As a viewer had pointed out, my video did not mention the install of the included spacers for the front mud-flaps. This should be around the 5:50 mark. Please refer to the official instructions from Toyota below for a much better explanation than this video.
PDF Instructions:
www.lexusparts...
🔵 Subscribe for more Car | Technology Content!
www.youtube.co...
Follow me on Social Media:
📸 Instagram
/ ilimit
#rx #lexus #rx350
about to try this install on our rx450h f-sport.. where did you screw the inner screw on the rear? did you take off the tire and drill a hole there?? is there no metal clip?
cool. thanks!
Where do you get these?
Too bad your dad is not going to enjoy the leather he is saving it for someone else I guess
You're definitely right. 3 years later, the new owner thought it was a brand new car.
哇塞 ，第一次在youtube听到台山/开平话， 你们是台山还是开平的啊？
Derrick Lee 哈哈，应该是台山我觉得，我开平葛，听落好似唔是开平。
你好。 我们说恩平方言！👍
i l i m i t 请问你的挡泥板哪里买的？
Sorry last question. Did you use a 6mm drill bit or smaller?? I can only find my 5/32 bit. The holes you drilled look smaller than 6mm. Probably doesn’t matter but I keep delaying this install haha
How about rubber gaskets did not put it in.
I have running boards on my rx and I could not install the screw @7:13. The running board is in the way. I left that screw out as it seemed the mud guard was pretty secure with the 4 other screws. I believe the factory running boards are riveted in place.
Unfortunately I don’t think it’ll work with running boards then. Bummer that you had to find out the hard way. I didn’t know either
I need buy this for my lexus too. Dirts fly up the front doors lol. And rear bumper. Suck lol
It definitely helped 👍
Thanks so much for this Video . It help me went throught the job and everything came out perfect .
Glad it helped, good sir!
I don't know why but I misread the front spacer instructions and thought they went directly behind the front mudguard even though the instructions clearly say to put them between the fender and liner. May want to add that to the video. Otherwise this helped a ton! looks good! Thanks!
Andrew - so sorry about this. Like i said in my other responses, it's rare for me to leave questions unanswered. You are completely correct. Looking back, I didn't mention the spacers at all. This DIY video was incomplete. Thanks for pointing it out!
would i have to remove the running boards to install the mud guards?
Where does the spacer go? Why was it skipped in this video??
Does anyone have the instructions for this install ?
So sorry that I didnt respond. I usually respond to all comments but didn't know this video had so many unanswered ones. Reviewing the video - I had probably did skip installing the spacers part.. which makes this an incomplete DIY actually. I found you the official PDF for the install, but I'm sure you found the solution.
There is a chrysler repair shop that could use this guy.
Haha not sure if that's a good thing? Thanks for the comment 👍
I saw you had the spacer in hand, but not when installed. I can't figure out where the Spacers go. Anyone know?
Can you timestamp the part for me? I can try to explain further.
@@ilimit the little brackets that go with the front mud guards
@@ilimit at 0:49 secs you show a total of 6 pieces for the mud guard installation. But you only show 4 pieces installed along withy he hardware. The two smaller pieces at the front are not shown on the video later on
Your dad is awesome!
Thank you sir. We know! 🙏🙏
@@ilimit would you say that these guards are effective I’m deciding on if I should pick up some or not
Thanks for posting but i have an question. What about extra :47 came with front left and right guard look like hockey sticks? you didn't install. Thanks
Hey Tree Mango - Rewatching this - I probably skipped mentioning that those hockey sticks are spacers. You place them in between the liner at around the 5:50 mark. Fact check me because it's been a couple of years. Just realized there were plenty of comments on this video that I didn't answer. I found official PDF instructions for you to follow, just check the description. Good luck!
Why didn’t you just buy a real F-Sport instead of trying to pass yours as one 🤦🏻♂️
Why leave such an unnecessary comment? Lol
@@ilimit maybe because it was a valid question, no need to get your feelings hurt because you couldn’t get an f-sport.
@@Alkatraz84 My father no longer owns the car, probably repossessed or something because he couldn't afford it. 🤷♂️
The real question is, you find yourself in this video about a DIY - however you leave with leaving a negative comment, completely irrelevant to the purpose of the video. Valid question or not, there's no room for hate in this world, especially in a time like this. So I wonder.. did you need help with installing splash guards? 🤔
@@ilimit sounds like a personal problem!